что можно сказать по этому SMART-у?

[email protected] ~ # smartctl -a /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.2-arch1-1] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     HGST Travelstar 7K1000
Device Model:     HGST HTS721010A9E630
Serial Number:    JG40006PGRRTXC
LU WWN Device Id: 5 000cca 6acca55c4
Firmware Version: JB0OA3B0
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Jun 21 16:49:30 2020 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (   45) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 177) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   094   094   062    Pre-fail  Always       -       655376
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   160   160   033    Pre-fail  Always       -       2
  4 Start_Stop_Count        0x0012   096   096   000    Old_age   Always       -       6336
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   003   003   000    Old_age   Always       -       42710
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       4032
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       188
193 Load_Cycle_Count        0x0012   001   001   000    Old_age   Always       -       3268634
194 Temperature_Celsius     0x0002   166   166   000    Old_age   Always       -       36 (Min/Max 15/54)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       20
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       528
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 532 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 532 occurred at disk power-on lifetime: 31354 hours (1306 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 d0 a0 67 dc 07  Error: ICRC, ABRT at LBA = 0x07dc67a0 = 131884960

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 c8 70 66 dc 40 08   1d+14:12:16.908  WRITE FPDMA QUEUED
  60 20 c0 40 26 47 40 08   1d+14:12:16.904  READ FPDMA QUEUED
  60 20 28 c0 21 47 40 08   1d+14:12:16.899  READ FPDMA QUEUED
  60 20 b8 20 26 47 40 08   1d+14:12:16.879  READ FPDMA QUEUED
  61 00 20 d0 a6 da 40 08   1d+14:12:16.860  WRITE FPDMA QUEUED

Error 531 occurred at disk power-on lifetime: 31354 hours (1306 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 b0 20 a7 da 07  Error: ICRC, ABRT at LBA = 0x07daa720 = 131770144

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 20 a8 c0 18 47 40 08   1d+14:12:16.319  READ FPDMA QUEUED
  61 00 a0 d0 a6 da 40 08   1d+14:12:16.319  WRITE FPDMA QUEUED
  ef 10 02 00 00 00 a0 08   1d+14:12:16.318  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 08   1d+14:12:16.318  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 08   1d+14:12:16.317  IDENTIFY DEVICE

Error 530 occurred at disk power-on lifetime: 31354 hours (1306 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 a0 30 a7 da 07  Error: ICRC, ABRT at LBA = 0x07daa730 = 131770160

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 78 d0 a6 da 40 08   1d+14:12:15.788  WRITE FPDMA QUEUED
  60 20 00 c0 18 47 40 08   1d+14:12:15.788  READ FPDMA QUEUED
  60 20 70 20 1a 47 40 08   1d+14:12:15.780  READ FPDMA QUEUED
  61 00 f0 b8 7b da 40 08   1d+14:12:15.751  WRITE FPDMA QUEUED
  60 20 e8 40 9d 46 40 08   1d+14:12:15.751  READ FPDMA QUEUED

Error 529 occurred at disk power-on lifetime: 31354 hours (1306 days + 10 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 20 98 7d da 07  Error: ICRC, ABRT at LBA = 0x07da7d98 = 131759512

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 b0 b8 7b da 40 08   1d+14:12:15.158  WRITE FPDMA QUEUED
  60 20 a8 40 15 47 40 08   1d+14:12:15.157  READ FPDMA QUEUED
  60 20 a0 20 15 47 40 08   1d+14:12:15.157  READ FPDMA QUEUED
  61 00 98 20 f8 d8 40 08   1d+14:12:15.156  WRITE FPDMA QUEUED
  60 20 90 80 13 47 40 08   1d+14:12:15.156  READ FPDMA QUEUED

Error 528 occurred at disk power-on lifetime: 31316 hours (1304 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 41 8f 69 70 04  Error: ICRC, ABRT at LBA = 0x0470698f = 74475919

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 10 18 e8 69 70 40 08   4d+07:01:13.025  READ FPDMA QUEUED
  60 08 10 d8 69 70 40 08   4d+07:01:13.025  READ FPDMA QUEUED
  60 d0 08 00 68 70 40 08   4d+07:01:13.025  READ FPDMA QUEUED
  60 f8 00 08 02 00 40 08   4d+07:01:13.023  READ FPDMA QUEUED
  60 f8 f0 08 01 00 40 08   4d+07:01:13.022  READ FPDMA QUEUED

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
пациент жив или мертв?
Псевдографический инсталлятор Arch Linux ver. 3.8.2
Благодарности принимаются на ЯД 410012815723874
nafanja, у меня точно такой же терабайтник под файлопомойкой, если что то из выхлопа интересует - выложу. Есть какие то ошибки, но не бэды, связано с тем что недавно люди в касках и нетрадиционной ориентацией днем вырубили свет. Не разбирался с ним, скоро он пойдет во внешний карман.
In Tux We Trust
redix, ответ биоса и аиды я знаю. - НЕ ЖИЛЕЦ, хотя сейчас и работает еще с выключенной проверкой смарта в биосе.
хотелось бы понять и уточнить, вывод сообщества пользователей линукса по этому выводу, на чем было это основано.
Псевдографический инсталлятор Arch Linux ver. 3.8.2
Благодарности принимаются на ЯД 410012815723874
nafanja
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 20
Reallocation Event Count — содержит количество переназначенных секторов. В некотором смысле говорит о состоянии диска, чем выше — тем хуже. Записываются успешные и не успешные попытки. Частая причина переназначенных секторов — удар диска, падение, длительная вибрация. 
Уже есть не хорошо.
RusWolf
Reallocation Event Count
там 20, а по идее должно до 100 дойти... или я ошибаюсь?
Псевдографический инсталлятор Arch Linux ver. 3.8.2
Благодарности принимаются на ЯД 410012815723874
RusWolf
длительная вибрация
Да какая вибрация, его не слышно вообще в работе, это же 2,5".
In Tux We Trust
redix
Да какая вибрация
Внешняя, винт может и в нубуке стоять.
nafanja
а по идее должно до 100 дойти
Судя по VALUE WORST, 100 - это уже наихудший показатель.
redix
Да какая вибрация, его не слышно вообще в работе, это же 2,5".
тебе повезло, или мне не повезло с этим экземпляром, с самого начала винт пришлось прикрутить к салазкам, а салазки к корпусу, вибрация выше чем я расcчитывал покупая 2.5" даже матерился не поверив что у 2.5" может быть такая вибрация.
Псевдографический инсталлятор Arch Linux ver. 3.8.2
Благодарности принимаются на ЯД 410012815723874
раскрою заранее
аида ругается на
nafanja
1 Raw_Read_Error_Rate 0x000b 094 094 062 Pre-fail Always - 655376
Псевдографический инсталлятор Arch Linux ver. 3.8.2
Благодарности принимаются на ЯД 410012815723874
 
Зарегистрироваться или войдите чтобы оставить сообщение.