Решено : Ошибка при обновлении

После обновления вылазит
==> ERROR: module not found: `bbswitch'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
ошибка: не удалось корректно выполнить команду
( 4/10) Reloading system bus configuration...
( 5/10) Warn about old perl modules
( 6/10) Probing GDK-Pixbuf loader modules...
( 7/10) Compiling GSettings XML schema files...
( 8/10) Updating icon theme caches...
( 9/10) Updating the info directory file...

bbswitch я удалил как исправить ошибку?
Ни кто с акой проблемой не сталкивался ?
vladan
==> ERROR: module not found: `bbswitch'
==> Generating module dependencies
Покажите вывод , может понятно будет откуда модуль требуется

lsmod | grep bbs
cat /proc/cmdline
cat /proc/version
cat /etc/mkinitcpio.conf
ls /usr/lib/modules
ls /etc/modprobe.d

Скорее всего где то вручную прописан модуль (например в /etc/mkinitcpio.conf или опциях загрузки ядра), но может и старое ядро с загруженным модулем
То есть bbswitch был удалён за ненадобностью, но оно его хочет?
BigOrange
То есть bbswitch был удалён за ненадобностью, но оно его хочет?
l да я удалили за ненадобностью bbswitch
vs220
vladan
==> ERROR: module not found: `bbswitch'
==> Generating module dependencies
Покажите вывод , может понятно будет откуда модуль требуется

lsmod | grep bbs
cat /proc/cmdline
cat /proc/version
cat /etc/mkinitcpio.conf
ls /usr/lib/modules
ls /etc/modprobe.d

Скорее всего где то вручную прописан модуль (например в /etc/mkinitcpio.conf или опциях загрузки ядра), но может и старое ядро с загруженным модулем
lsmod | grep bbs
пусто

cat /proc/cmdline
BOOT_IMAGE=/sv_root/boot/vmlinuz-linux root=UUID=5e2999af-41cc-4574-bfee-c50743b6b23f rw rootflags=subvol=sv_root rcutree.rcu_idle_gp_delay=1

cat /proc/version
Linux version 5.5.13-arch2-1 (linux@archlinux) (gcc version 9.3.0 (Arch Linux 9.3.0-1)) #1 SMP PREEMPT Mon, 30 Mar 2020 20:42:41 +0000

[papa@notebook ~]$ cat /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES=(piix ide_disk reiserfs)
MODULES="i915 bbswitch"

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=()

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=()

# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS=(base)
#
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS=(base udev autodetect block filesystems)
#
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS=(base udev block filesystems)
#
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS=(base udev block mdadm encrypt filesystems)
#
## This setup loads an lvm2 volume group on a usb device.
# HOOKS=(base udev block lvm2 filesystems)
#
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr, fsck and shutdown hooks.
HOOKS=(base udev autodetect modconf block filesystems keyboard fsck)

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=()
[papa@notebook ~]$ ls /usr/lib/modules
5.5.13-arch2-1

[papa@notebook ~]$ ls /etc/modprobe.d
modprobe.conf
vladan
MODULES="i915 bbswitch"
Уберите bbswitch если уже не нужен, и пересоберите образ и инит
pacman -S linux
vs220
vladan
MODULES="i915 bbswitch"
Уберите bbswitch если уже не нужен, и пересоберите образ и инит
pacman -S linux
закоментить или стереть строчку MODULES="i915 bbswitch" ?
закоментировать
vladan
закоментить или стереть строчку MODULES="i915 bbswitch" ?
стереть bbswitch оставив
MODULES="i915"
 
Зарегистрироваться или войдите чтобы оставить сообщение.