Не получается настроить скорость вентиляторов MSI GeForce 1080TI

Видимо по-умолчанию, тк на win было тоже самое на карте выключены вентиляторы.
На win включились после установки msi afterburner, однако на arch подобного софта нет
Пробовал погуглить что-то по fancontol, но нашел только решения, зависящие от sensor
Sensor же не показывает GPU FAN вообще (хотя возможно называет его cpu_fan)

Хочу хоть как-то включить вентиляторы, тк с выключенными чет не очень )

sudo sensors-detect
# sensors-detect revision $Revision$
# Board: ASUSTeK COMPUTER INC. ROG MAXIMUS X HERO
# Kernel: 5.1.2-arch1-1-ARCH x86_64
# Processor: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (6/158/10)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 17h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               Yes
Found `Nuvoton NCT6793D Super IO Sensors'                   Success!
    (address 0x290, driver `nct6775')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
# DMI data unavailable, please consider installing dmidecode 2.7
# or later for better results.
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801' for device 0000:00:1f.4: Kaby Lake (PCH)
Module i2c-dev loaded successfully.

Next adapter: SMBus I801 adapter at f000 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x51
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Client found at address 0x53
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No

Next adapter: NVIDIA i2c adapter 1 at 1:00.0 (i2c-1)
Do you want to scan it? (yes/NO/selectively):

Next adapter: NVIDIA i2c adapter 2 at 1:00.0 (i2c-2)
Do you want to scan it? (yes/NO/selectively):

Next adapter: NVIDIA i2c adapter 4 at 1:00.0 (i2c-3)
Do you want to scan it? (yes/NO/selectively):

Next adapter: NVIDIA i2c adapter 6 at 1:00.0 (i2c-4)
Do you want to scan it? (yes/NO/selectively):

Next adapter: NVIDIA i2c adapter 7 at 1:00.0 (i2c-5)
Do you want to scan it? (yes/NO/selectively):

Next adapter: NVIDIA i2c adapter 8 at 1:00.0 (i2c-6)
Do you want to scan it? (yes/NO/selectively):

Next adapter: NVIDIA i2c adapter 9 at 1:00.0 (i2c-7)
Do you want to scan it? (yes/NO/selectively):
Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)

Driver `nct6775':
  * ISA bus, address 0x290
    Chip `Nuvoton NCT6793D Super IO Sensors' (confidence: 9)

Do you want to overwrite /etc/conf.d/lm_sensors? (YES/no):
Unloading i2c-dev... OK
Unloading cpuid... OK
sensor
asus-isa-0000
Adapter: ISA adapter
cpu_fan:        0 RPM

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +53.0°C  (high = +82.0°C, crit = +100.0°C)
Core 0:        +48.0°C  (high = +82.0°C, crit = +100.0°C)
Core 1:        +50.0°C  (high = +82.0°C, crit = +100.0°C)
Core 2:        +53.0°C  (high = +82.0°C, crit = +100.0°C)
Core 3:        +48.0°C  (high = +82.0°C, crit = +100.0°C)
Core 4:        +53.0°C  (high = +82.0°C, crit = +100.0°C)
Core 5:        +48.0°C  (high = +82.0°C, crit = +100.0°C)
sudo pwmconfig
# pwmconfig revision $Revision$ ($Date$)
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

/usr/bin/pwmconfig: There are no pwm-capable sensor modules installed
Я так понимаю, Вы пытаетесь настроить скорость вентилятора nvidia?
https://wiki.archlinux.org/index.php/NVIDIA/Tips_and_tricks#Set_fan_speed_at_login
https://wiki.archlinux.org/index.php/Fan_speed_control#Increasing_fan_div

Для вентилятора CPU
что есть что можно узнать так
$ cat /sys/class/thermal/cooling_device*/type
но куллер на видео карте может быть доступен только через модуль nvidia и прямого доступа к нему может и не быть...

p.s. скорее всего стоит всё в auto, и если куллеры не крутятся есть вероятность что производитель рассчитал рассеиваемую мощность радиатором, и решил не докучать пользователей шумом кулеров при низкой нагрузке)
Ошибки в тексте-неповторимый стиль автора©
Температура 55-60. Могу добить до 80 и они все равно не включатся ...
cat /sys/class/thermal/cooling_device*/type
Processor
Processor
Processor
intel_powerclamp
Processor
Processor
Processor
Processor
Processor
Processor
Processor
Processor
Processor
так 80 это нормальная рабочая температура для видеокарты
Ошибки в тексте-неповторимый стиль автора©
Рекомендую использовать проги для разгона - в них, как правило (в хороших), всегда есть инструмент для управления и контроля вентиляторами.
Лучшая прога - afterburner, но она чисто виндовая (для linux не делают принципиально). Но в linux есть неплохие аналоги этой проги.

EDIT 1 - gwe - новая утилита для linux, которая позволяет управлять вентиляторами и разгонять видеокарты Nvidia, аналог MSI Afterburner
Есть в AUR - aur/gwe 0.12.3-1 - A system utility for controlling NVIDIA GPUs

PS - Правда сам никогда не пробовал, но пишут, что не плохой GUI, лучше чем у nvidia-settings
Ошибки не исчезают с опытом - они просто умнеют
vasek
проги
Добавил ховтушку по nvfancontrol
https://archlinux.org.ru/forum/topic/19249/
gwe помог, спасибо
Может сразу сможете подсказать что-то аналогичное для CPU?
m9ffk4
Может сразу сможете подсказать что-то аналогичное для CPU?
Посмотри обсуждение в этом топике - там упомянул NBFC и через регистры (описано в этом блоге)

PS - опиши впечатление от gwe
Ошибки не исчезают с опытом - они просто умнеют
 
Зарегистрироваться или войдите чтобы оставить сообщение.