Не видит видеокарту GeForce 1080TI

Установил arch по оф инструкции, но еще при загрузки с флешки видео перестало отображаться.
Подключил через материнку
Дошел до пункта установки дров на видео и увидел что при lspci моей карты там нет
00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 630 (Desktop)
00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1
00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #17 (rev f0)
00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #1 (rev f0)
00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0)
00:1c.6 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #7 (rev f0)
00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #9 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Z370 Chipset LPC/eSPI Controller
00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
04:00.0 USB controller: ASMedia Technology Inc. ASM2142 USB 3.1 Host Controller
05:00.0 USB controller: ASMedia Technology Inc. ASM2142 USB 3.1 Host Controller
До установки arch стояла винда на которой все было ок
Подскажите где искать концы и в чем может быть причина?
$ lspci -k | grep -A 2 -E "(VGA|3D)" 
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 630 (Desktop)
        DeviceName:  Onboard IGD
        Subsystem: ASUSTeK Computer Inc. UHD Graphics 630 (Desktop)
интереесно
покажите
# journalctl -b
или
# dmesg

p.s. с очень большой долей вероятности дело тут в железе...
Ошибки в тексте-неповторимый стиль автора©
[    0.000000] Linux version 5.1.2-arch1-1-ARCH (builduser@heftig-12261) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Wed May 15 00:09:47 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=92862ede-d8e4-470b-903f-5c9223c7e6c6 rw quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ae60fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ae61000-0x000000007ae61fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ae62000-0x000000007ae62fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ae63000-0x0000000087b61fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000087b62000-0x000000008941efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008941f000-0x0000000089479fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008947a000-0x000000008986bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008986c000-0x000000008afa1fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008afa2000-0x000000008affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008b000000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: System manufacturer System Product Name/ROG MAXIMUS X HERO, BIOS 0505 10/11/2017
[    0.000000] tsc: Detected 3700.000 MHz processor
[    0.001258] tsc: Detected 3696.000 MHz TSC
[    0.001258] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001259] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001264] last_pfn = 0x86f000 max_arch_pfn = 0x400000000
[    0.001266] MTRR default type: write-back
[    0.001266] MTRR fixed ranges enabled:
[    0.001267]   00000-9FFFF write-back
[    0.001267]   A0000-BFFFF uncachable
[    0.001268]   C0000-FFFFF write-protect
[    0.001268] MTRR variable ranges enabled:
[    0.001269]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.001270]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.001270]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.001271]   3 base 008C000000 mask 7FFC000000 uncachable
[    0.001271]   4 base 008B800000 mask 7FFF800000 uncachable
[    0.001272]   5 disabled
[    0.001272]   6 disabled
[    0.001272]   7 disabled
[    0.001273]   8 disabled
[    0.001273]   9 disabled
[    0.002317] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.002525] last_pfn = 0x8b000 max_arch_pfn = 0x400000000
[    0.007869] found SMP MP-table at [mem 0x000fcd90-0x000fcd9f]
[    0.007915] check: Scanning 1 areas for low memory corruption
[    0.007918] Using GB pages for direct mapping
[    0.007919] BRK [0x4d6801000, 0x4d6801fff] PGTABLE
[    0.007920] BRK [0x4d6802000, 0x4d6802fff] PGTABLE
[    0.007921] BRK [0x4d6803000, 0x4d6803fff] PGTABLE
[    0.007933] BRK [0x4d6804000, 0x4d6804fff] PGTABLE
[    0.007935] BRK [0x4d6805000, 0x4d6805fff] PGTABLE
[    0.007986] BRK [0x4d6806000, 0x4d6806fff] PGTABLE
[    0.008000] BRK [0x4d6807000, 0x4d6807fff] PGTABLE
[    0.008015] BRK [0x4d6808000, 0x4d6808fff] PGTABLE
[    0.008037] BRK [0x4d6809000, 0x4d6809fff] PGTABLE
[    0.008065] BRK [0x4d680a000, 0x4d680afff] PGTABLE
[    0.008089] RAMDISK: [mem 0x36e95000-0x37741fff]
[    0.008093] ACPI: Early table checksum verification disabled
[    0.008122] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.008124] ACPI: XSDT 0x00000000894430A8 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008127] ACPI: FACP 0x000000008946E150 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.008131] ACPI: DSDT 0x0000000089443200 02AF4D (v02 ALASKA A M I    01072009 INTL 20160422)
[    0.008133] ACPI: FACS 0x000000008986BF00 000040
[    0.008134] ACPI: APIC 0x000000008946E268 0000F4 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.008136] ACPI: FPDT 0x000000008946E360 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008137] ACPI: FIDT 0x000000008946E3A8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008139] ACPI: WSMT 0x0000000089479D70 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.008140] ACPI: MCFG 0x000000008946E4A0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.008142] ACPI: SSDT 0x000000008946E4E0 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.008144] ACPI: SSDT 0x000000008946E888 003156 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.008145] ACPI: SSDT 0x00000000894719E0 002611 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.008147] ACPI: HPET 0x0000000089473FF8 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
[    0.008149] ACPI: SSDT 0x0000000089474030 000B13 (v02 INTEL  xh_rvp08 00000000 INTL 20160422)
[    0.008151] ACPI: UEFI 0x0000000089474B48 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.008152] ACPI: SSDT 0x0000000089474B90 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.008154] ACPI: LPIT 0x0000000089476340 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.008155] ACPI: SSDT 0x00000000894763D8 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.008157] ACPI: SSDT 0x0000000089476520 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.008159] ACPI: SSDT 0x00000000894767C0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.008160] ACPI: SSDT 0x00000000894797C8 000517 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.008162] ACPI: DBGP 0x0000000089479CE0 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.008163] ACPI: DBG2 0x0000000089479D18 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.008169] ACPI: Local APIC address 0xfee00000
[    0.008297] No NUMA configuration found
[    0.008298] Faking a node at [mem 0x0000000000000000-0x000000086effffff]
[    0.008300] NODE_DATA(0) allocated [mem 0x86effc000-0x86effffff]
[    0.008323] Zone ranges:
[    0.008324]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008325]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.008325]   Normal   [mem 0x0000000100000000-0x000000086effffff]
[    0.008326]   Device   empty
[    0.008327] Movable zone start for each node
[    0.008327] Early memory node ranges
[    0.008328]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.008328]   node   0: [mem 0x0000000000100000-0x000000007ae60fff]
[    0.008328]   node   0: [mem 0x000000007ae63000-0x0000000087b61fff]
[    0.008329]   node   0: [mem 0x000000008afa2000-0x000000008affffff]
[    0.008329]   node   0: [mem 0x0000000100000000-0x000000086effffff]
[    0.008651] Zeroed struct page in unavailable ranges: 33959 pages
[    0.008652] Initmem setup node 0 [mem 0x0000000000001000-0x000000086effffff]
[    0.008652] On node 0 totalpages: 8350553
[    0.008653]   DMA zone: 64 pages used for memmap
[    0.008653]   DMA zone: 21 pages reserved
[    0.008654]   DMA zone: 3995 pages, LIFO batch:0
[    0.008712]   DMA32 zone: 8623 pages used for memmap
[    0.008712]   DMA32 zone: 551870 pages, LIFO batch:63
[    0.017910]   Normal zone: 121792 pages used for memmap
[    0.017911]   Normal zone: 7794688 pages, LIFO batch:63
[    0.128752] Reserving Intel graphics memory at [mem 0x8c000000-0x8fffffff]
[    0.128933] ACPI: PM-Timer IO Port: 0x1808
[    0.128934] ACPI: Local APIC address 0xfee00000
[    0.128938] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.128939] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.128939] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.128940] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.128940] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.128940] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.128941] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.128941] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.128941] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.128942] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.128942] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.128943] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.128968] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.128969] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.128970] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.128971] ACPI: IRQ0 used by override.
[    0.128971] ACPI: IRQ9 used by override.
[    0.128973] Using ACPI (MADT) for SMP configuration information
[    0.128974] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.128976] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[    0.128986] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.128987] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.128988] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.128988] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.128988] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.128989] PM: Registered nosave memory: [mem 0x7ae61000-0x7ae61fff]
[    0.128990] PM: Registered nosave memory: [mem 0x7ae62000-0x7ae62fff]
[    0.128991] PM: Registered nosave memory: [mem 0x87b62000-0x8941efff]
[    0.128991] PM: Registered nosave memory: [mem 0x8941f000-0x89479fff]
[    0.128991] PM: Registered nosave memory: [mem 0x8947a000-0x8986bfff]
[    0.128992] PM: Registered nosave memory: [mem 0x8986c000-0x8afa1fff]
[    0.128993] PM: Registered nosave memory: [mem 0x8b000000-0x8fffffff]
[    0.128993] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.128993] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.128994] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.128994] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.128994] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.128995] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.128995] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.128995] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.128996] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.128996] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.128996] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.128997] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.128998] [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.128999] Booting paravirtualized kernel on bare hardware
[    0.129001] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.202683] random: get_random_bytes called from start_kernel+0x96/0x538 with crng_init=0
[    0.202687] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:12 nr_node_ids:1
[    0.202894] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144
[    0.202898] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.202899] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[    0.202911] Built 1 zonelists, mobility grouping on.  Total pages: 8220053
[    0.202912] Policy zone: Normal
[    0.202913] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=92862ede-d8e4-470b-903f-5c9223c7e6c6 rw quiet
[    0.205262] Calgary: detecting Calgary via BIOS EBDA area
[    0.205263] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.257603] Memory: 32771972K/33402212K available (12291K kernel code, 1317K rwdata, 3768K rodata, 1564K init, 3740K bss, 630240K reserved, 0K cma-reserved)
[    0.257714] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[    0.257718] Kernel/User page tables isolation: enabled
[    0.257728] ftrace: allocating 37076 entries in 145 pages
[    0.267701] rcu: Preemptible hierarchical RCU implementation.
[    0.267702] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.267702] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.267703] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
[    0.267703] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.267704] 	Tasks RCU enabled.
[    0.267704] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.267705] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[    0.268747] NR_IRQS: 20736, nr_irqs: 2152, preallocated irqs: 16
[    0.268921] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.269038] Console: colour dummy device 80x25
[    0.269041] printk: console [tty0] enabled
[    0.269053] ACPI: Core revision 20190215
[    0.269330] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.269360] hpet clockevent registered
[    0.269394] APIC: Switch to symmetric I/O mode setup
[    0.270594] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.270864] Switched APIC routing to physical flat.
[    0.274962] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.289368] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[    0.289377] Calibrating delay loop (skipped), value calculated using timer frequency.. 7394.00 BogoMIPS (lpj=12320000)
[    0.289378] pid_max: default: 32768 minimum: 301
[    0.289400] LSM: Security Framework initializing
[    0.289402] Yama: becoming mindful.
[    0.292191] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.293591] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.293643] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.293689] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.293787] *** VALIDATE proc ***
[    0.293818] *** VALIDATE cgroup1 ***
[    0.293819] *** VALIDATE cgroup2 ***
[    0.293839] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.293839] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.293843] mce: CPU supports 12 MCE banks
[    0.293850] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.293865] process: using mwait in idle threads
[    0.293866] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.293867] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.293868] Spectre V2 : Mitigation: Full generic retpoline
[    0.293868] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.293869] Speculative Store Bypass: Vulnerable
[    0.293888] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.294051] Freeing SMP alternatives memory: 32K
[    0.296081] TSC deadline timer enabled
[    0.296086] smpboot: CPU0: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[    0.316041] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.316059] ... version:                4
[    0.316060] ... bit width:              48
[    0.316060] ... generic registers:      4
[    0.316060] ... value mask:             0000ffffffffffff
[    0.316061] ... max period:             00007fffffffffff
[    0.316061] ... fixed-purpose events:   3
[    0.316061] ... event mask:             000000070000000f
[    0.322704] rcu: Hierarchical SRCU implementation.
[    0.346209] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.352708] smp: Bringing up secondary CPUs ...
[    0.392710] x86: Booting SMP configuration:
[    0.392711] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6
[    0.593157] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.632712]   #7  #8  #9 #10 #11
[    0.793067] smp: Brought up 1 node, 12 CPUs
[    0.793067] smpboot: Max logical packages: 1
[    0.793067] smpboot: Total of 12 processors activated (88739.00 BogoMIPS)
[    0.796582] devtmpfs: initialized
[    0.796582] x86/mm: Memory block size: 128MB
[    0.797383] PM: Registering ACPI NVS region [mem 0x7ae61000-0x7ae61fff] (4096 bytes)
[    0.797383] PM: Registering ACPI NVS region [mem 0x8947a000-0x8986bfff] (4136960 bytes)
[    0.797383] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.797383] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.797383] pinctrl core: initialized pinctrl subsystem
[    0.797383] PM: RTC time: 22:09:34, date: 2019-05-18
[    0.797383] NET: Registered protocol family 16
[    0.797383] audit: initializing netlink subsys (disabled)
[    0.797383] audit: type=2000 audit(1558217374.529:1): state=initialized audit_enabled=0 res=1
[    0.799377] cpuidle: using governor ladder
[    0.799377] cpuidle: using governor menu
[    0.799385] KVM setup pv remote TLB flush
[    0.799388] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.799388] ACPI: bus type PCI registered
[    0.799389] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.799438] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.799439] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.799448] PCI: Using configuration type 1 for base access
[    0.800294] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.800294] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.800294] ACPI: Added _OSI(Module Device)
[    0.800294] ACPI: Added _OSI(Processor Device)
[    0.800294] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.800294] ACPI: Added _OSI(Processor Aggregator Device)
[    0.800294] ACPI: Added _OSI(Linux-Dell-Video)
[    0.800294] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.800294] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.835194] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.841667] ACPI: Dynamic OEM Table Load:
[    0.841672] ACPI: SSDT 0xFFFF8CF24AF83000 00077A (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.842127] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[    0.843353] ACPI: Dynamic OEM Table Load:
[    0.843355] ACPI: SSDT 0xFFFF8CF24A5CA540 0000BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.843670] ACPI: Dynamic OEM Table Load:
[    0.843673] ACPI: SSDT 0xFFFF8CF24AF86800 000628 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.844279] ACPI: Dynamic OEM Table Load:
[    0.844283] ACPI: SSDT 0xFFFF8CF24A525000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.845177] ACPI: Dynamic OEM Table Load:
[    0.845180] ACPI: SSDT 0xFFFF8CF24A582C00 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.849011] ACPI: EC: EC started
[    0.849011] ACPI: EC: interrupt blocked
[    0.849026] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.849027] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.849028] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.849028] ACPI: Interpreter enabled
[    0.849060] ACPI: (supports S0 S3 S4 S5)
[    0.849060] ACPI: Using IOAPIC for interrupt routing
[    0.849088] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.850051] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.852756] ACPI: Power Resource [PG00] (on)
[    0.853054] ACPI: Power Resource [PG01] (on)
[    0.853345] ACPI: Power Resource [PG02] (on)
[    0.875264] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.875269] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.875443] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    0.875608] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    0.875609] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.876530] PCI host bridge to bus 0000:00
[    0.876531] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.876532] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.876533] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.876533] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    0.876534] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.876535] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.876539] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[    0.876832] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.876867] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.877030] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
[    0.877037] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[    0.877041] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.877044] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.877217] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
[    0.877235] pci 0000:00:14.0: reg 0x10: [mem 0xdf230000-0xdf23ffff 64bit]
[    0.877289] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.877490] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
[    0.877507] pci 0000:00:16.0: reg 0x10: [mem 0xdf24d000-0xdf24dfff 64bit]
[    0.877551] pci 0000:00:16.0: PME# supported from D3hot
[    0.877723] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
[    0.877736] pci 0000:00:17.0: reg 0x10: [mem 0xdf248000-0xdf249fff]
[    0.877742] pci 0000:00:17.0: reg 0x14: [mem 0xdf24c000-0xdf24c0ff]
[    0.877747] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.877753] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.877758] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.877763] pci 0000:00:17.0: reg 0x24: [mem 0xdf24b000-0xdf24b7ff]
[    0.877795] pci 0000:00:17.0: PME# supported from D3hot
[    0.877927] pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
[    0.877995] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.878166] pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
[    0.878230] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.878386] pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
[    0.878446] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.878601] pci 0000:00:1c.6: [8086:a296] type 01 class 0x060400
[    0.878661] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.878817] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
[    0.878882] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.879054] pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100
[    0.879266] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
[    0.879279] pci 0000:00:1f.2: reg 0x10: [mem 0xdf244000-0xdf247fff]
[    0.879443] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
[    0.879467] pci 0000:00:1f.3: reg 0x10: [mem 0xdf240000-0xdf243fff 64bit]
[    0.879494] pci 0000:00:1f.3: reg 0x20: [mem 0xdf220000-0xdf22ffff 64bit]
[    0.879537] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.879749] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
[    0.879809] pci 0000:00:1f.4: reg 0x10: [mem 0xdf24a000-0xdf24a0ff 64bit]
[    0.879878] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.880072] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[    0.880097] pci 0000:00:1f.6: reg 0x10: [mem 0xdf200000-0xdf21ffff]
[    0.880196] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.880343] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.880385] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.880424] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.880472] pci 0000:04:00.0: [1b21:2142] type 00 class 0x0c0330
[    0.880496] pci 0000:04:00.0: reg 0x10: [mem 0xdf100000-0xdf107fff 64bit]
[    0.880540] pci 0000:04:00.0: enabling Extended Tags
[    0.880599] pci 0000:04:00.0: PME# supported from D0
[    0.880666] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.880668] pci 0000:00:1c.4:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.880715] pci 0000:05:00.0: [1b21:2142] type 00 class 0x0c0330
[    0.880739] pci 0000:05:00.0: reg 0x10: [mem 0xdf000000-0xdf007fff 64bit]
[    0.880782] pci 0000:05:00.0: enabling Extended Tags
[    0.880840] pci 0000:05:00.0: PME# supported from D0
[    0.880905] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.880908] pci 0000:00:1c.6:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.880948] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.882193] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.882239] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.882284] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.882328] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.882372] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.882416] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.882460] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.882503] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.882804] ACPI: EC: interrupt unblocked
[    0.882818] ACPI: EC: event unblocked
[    0.882828] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.882829] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[    0.882878] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.882878] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.882878] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.882878] vgaarb: loaded
[    0.882878] ACPI: bus type USB registered
[    0.882878] usbcore: registered new interface driver usbfs
[    0.882878] usbcore: registered new interface driver hub
[    0.882878] usbcore: registered new device driver usb
[    0.882878] pps_core: LinuxPPS API ver. 1 registered
[    0.882878] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.882878] PTP clock support registered
[    0.882878] EDAC MC: Ver: 3.0.0
[    0.882892] PCI: Using ACPI for IRQ routing
[    0.907462] PCI: pci_cache_line_size set to 64 bytes
[    0.907509] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[    0.907510] e820: reserve RAM buffer [mem 0x7ae61000-0x7bffffff]
[    0.907511] e820: reserve RAM buffer [mem 0x87b62000-0x87ffffff]
[    0.907511] e820: reserve RAM buffer [mem 0x8b000000-0x8bffffff]
[    0.907512] e820: reserve RAM buffer [mem 0x86f000000-0x86fffffff]
[    0.907570] NetLabel: Initializing
[    0.907571] NetLabel:  domain hash size = 128
[    0.907571] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.907578] NetLabel:  unlabeled traffic allowed by default
[    0.909424] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.909426] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.912719] clocksource: Switched to clocksource tsc-early
[    0.919452] VFS: Disk quotas dquot_6.6.0
[    0.919462] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.919475] *** VALIDATE hugetlbfs ***
[    0.919496] pnp: PnP ACPI init
[    0.919682] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.919685] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.919877] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.919878] system 00:01: [io  0xffff] has been reserved
[    0.919879] system 00:01: [io  0xffff] has been reserved
[    0.919880] system 00:01: [io  0xffff] has been reserved
[    0.919881] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.919881] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.919883] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.919956] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.919957] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.919970] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.919996] system 00:04: [io  0x1854-0x1857] has been reserved
[    0.919998] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.920196] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.920197] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.920198] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.920198] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.920199] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.920200] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.920201] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.920201] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.920202] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.920203] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.920205] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.920236] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.920237] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.920237] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.920238] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.920239] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.920239] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.920240] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.920241] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.920242] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.920243] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.920245] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.920497] system 00:07: [io  0xfe00-0xfefe] has been reserved
[    0.920499] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.921522] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.921522] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.921523] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.921525] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.922288] pnp: PnP ACPI: found 9 devices
[    0.927539] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.927543] pci 0000:00:1b.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.927544] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.927545] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.927546] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.927548] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.927548] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.927553] pci 0000:00:1b.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
[    0.927556] pci 0000:00:1b.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
[    0.927557] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90400000-0x905fffff]
[    0.927559] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90600000-0x907fffff 64bit pref]
[    0.927560] pci 0000:00:1b.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.927561] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.927562] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.927567] pci 0000:00:1b.0: PCI bridge to [bus 02]
[    0.927569] pci 0000:00:1b.0:   bridge window [io  0x2000-0x2fff]
[    0.927572] pci 0000:00:1b.0:   bridge window [mem 0x90000000-0x901fffff]
[    0.927574] pci 0000:00:1b.0:   bridge window [mem 0x90200000-0x903fffff 64bit pref]
[    0.927577] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.927578] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.927581] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x905fffff]
[    0.927583] pci 0000:00:1c.0:   bridge window [mem 0x90600000-0x907fffff 64bit pref]
[    0.927586] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.927588] pci 0000:00:1c.4:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.927592] pci 0000:00:1c.6: PCI bridge to [bus 05]
[    0.927594] pci 0000:00:1c.6:   bridge window [mem 0xdf000000-0xdf0fffff]
[    0.927598] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.927607] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.927607] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.927608] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.927609] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    0.927609] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.927610] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.927611] pci_bus 0000:02: resource 1 [mem 0x90000000-0x901fffff]
[    0.927611] pci_bus 0000:02: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
[    0.927612] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.927612] pci_bus 0000:03: resource 1 [mem 0x90400000-0x905fffff]
[    0.927613] pci_bus 0000:03: resource 2 [mem 0x90600000-0x907fffff 64bit pref]
[    0.927614] pci_bus 0000:04: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.927614] pci_bus 0000:05: resource 1 [mem 0xdf000000-0xdf0fffff]
[    0.927739] NET: Registered protocol family 2
[    0.927842] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[    0.927908] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.928095] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.928169] TCP: Hash tables configured (established 262144 bind 65536)
[    0.928199] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    0.928248] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    0.928325] NET: Registered protocol family 1
[    0.928328] NET: Registered protocol family 44
[    0.928335] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.928779] PCI: CLS 64 bytes, default 64
[    0.928802] Unpacking initramfs...
[    1.013873] Freeing initrd memory: 8884K
[    1.013878] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.013879] software IO TLB: mapped [mem 0x83b62000-0x87b62000] (64MB)
[    1.013897] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[    1.013917] clocksource: Switched to clocksource tsc
[    1.014038] check: Scanning for low memory corruption every 60 seconds
[    1.014447] Initialise system trusted keyrings
[    1.014455] Key type blacklist registered
[    1.014482] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[    1.015218] zbud: loaded
[    1.041000] Key type asymmetric registered
[    1.041001] Asymmetric key parser 'x509' registered
[    1.041007] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.041035] io scheduler mq-deadline registered
[    1.041036] io scheduler kyber registered
[    1.041063] io scheduler bfq registered
[    1.041617] aer 0000:00:1c.4:pcie002: AER enabled with IRQ 123
[    1.041699] aer 0000:00:1c.6:pcie002: AER enabled with IRQ 124
[    1.041855] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.041901] vesafb: mode is 3440x1440x32, linelength=13760, pages=0
[    1.041901] vesafb: scrolling: redraw
[    1.041902] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.041910] vesafb: framebuffer at 0xc0000000, mapped to 0x00000000232014ae, using 19392k, total 19392k
[    1.041931] fbcon: Deferring console take-over
[    1.041932] fb0: VESA VGA frame buffer device
[    1.041940] intel_idle: MWAIT substates: 0x11142120
[    1.041940] intel_idle: v0.4.1 model 0x9E
[    1.042321] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.042385] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.042390] ACPI: Sleep Button [SLPB]
[    1.042408] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.042411] ACPI: Power Button [PWRB]
[    1.042427] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.042464] ACPI: Power Button [PWRF]
[    1.043848] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.064784] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.066334] usbcore: registered new interface driver usbserial_generic
[    1.066337] usbserial: USB Serial support registered for generic
[    1.066350] rtc_cmos 00:03: RTC can wake from S4
[    1.066804] rtc_cmos 00:03: registered as rtc0
[    1.066813] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.066840] intel_pstate: Intel P-state driver initializing
[    1.067556] intel_pstate: HWP enabled
[    1.067872] ledtrig-cpu: registered to indicate activity on CPUs
[    1.067880] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:06 [mem 0xfdb00000-0xfdffffff]
[    1.067883] caller pmc_core_probe+0x90/0x2b8 mapping multiple BARs
[    1.067891] intel_pmc_core:  initialized
[    1.068000] NET: Registered protocol family 10
[    1.072414] Segment Routing with IPv6
[    1.072425] NET: Registered protocol family 17
[    1.073179] RAS: Correctable Errors collector initialized.
[    1.073224] microcode: sig=0x906ea, pf=0x2, revision=0x6e
[    1.073548] microcode: Microcode Update Driver: v2.2.
[    1.073560] sched_clock: Marking stable (1076522236, -2977160)->(1123881109, -50336033)
[    1.073984] registered taskstats version 1
[    1.073988] Loading compiled-in X.509 certificates
[    1.076009] Loaded X.509 cert 'Build time autogenerated kernel key: afd1f658641b33c07db351ab7c215db628435748'
[    1.076026] zswap: loaded using pool lzo/zbud
[    1.079740] Key type big_key registered
[    1.080624] PM:   Magic number: 3:298:199
[    1.080647] acpi device:54: hash matches
[    1.080800] rtc_cmos 00:03: setting system clock to 2019-05-18T22:09:34 UTC (1558217374)
[    1.081629] Freeing unused decrypted memory: 2040K
[    1.081871] Freeing unused kernel image memory: 1564K
[    1.106176] Write protecting the kernel read-only data: 18432k
[    1.106785] Freeing unused kernel image memory: 2016K
[    1.106931] Freeing unused kernel image memory: 328K
[    1.113801] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.113802] x86/mm: Checking user space page tables
[    1.120924] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.120925] Run /init as init process
[    1.132428] fbcon: Taking over console
[    1.132476] Console: switching to colour frame buffer device 430x90
[    1.434985] SCSI subsystem initialized
[    1.436959] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.436963] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.438020] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    1.438023] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.438154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    1.438155] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.438156] usb usb1: Product: xHCI Host Controller
[    1.438156] usb usb1: Manufacturer: Linux 5.1.2-arch1-1-ARCH xhci-hcd
[    1.438157] usb usb1: SerialNumber: 0000:00:14.0
[    1.438228] hub 1-0:1.0: USB hub found
[    1.438243] hub 1-0:1.0: 16 ports detected
[    1.439285] libata version 3.00 loaded.
[    1.439813] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.439815] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.439817] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.439841] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[    1.439842] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.439843] usb usb2: Product: xHCI Host Controller
[    1.439844] usb usb2: Manufacturer: Linux 5.1.2-arch1-1-ARCH xhci-hcd
[    1.439844] usb usb2: SerialNumber: 0000:00:14.0
[    1.439930] hub 2-0:1.0: USB hub found
[    1.439939] hub 2-0:1.0: 10 ports detected
[    1.440855] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.440857] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    1.440985] ahci 0000:00:17.0: version 3.0
[    1.441136] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.441137] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[    1.489910] scsi host0: ahci
[    1.490113] scsi host1: ahci
[    1.490275] scsi host2: ahci
[    1.490472] scsi host3: ahci
[    1.490683] scsi host4: ahci
[    1.490818] scsi host5: ahci
[    1.490851] ata1: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b100 irq 127
[    1.490852] ata2: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b180 irq 127
[    1.490853] ata3: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b200 irq 127
[    1.490854] ata4: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b280 irq 127
[    1.490855] ata5: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b300 irq 127
[    1.490857] ata6: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b380 irq 127
[    1.495638] xhci_hcd 0000:04:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[    1.495777] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    1.495778] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.495778] usb usb3: Product: xHCI Host Controller
[    1.495779] usb usb3: Manufacturer: Linux 5.1.2-arch1-1-ARCH xhci-hcd
[    1.495779] usb usb3: SerialNumber: 0000:04:00.0
[    1.495860] hub 3-0:1.0: USB hub found
[    1.495865] hub 3-0:1.0: 2 ports detected
[    1.495975] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.495977] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    1.495978] xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.496000] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.496008] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[    1.496009] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.496009] usb usb4: Product: xHCI Host Controller
[    1.496010] usb usb4: Manufacturer: Linux 5.1.2-arch1-1-ARCH xhci-hcd
[    1.496010] usb usb4: SerialNumber: 0000:04:00.0
[    1.496052] hub 4-0:1.0: USB hub found
[    1.496057] hub 4-0:1.0: 2 ports detected
[    1.496183] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.496184] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[    1.550967] xhci_hcd 0000:05:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[    1.551100] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    1.551101] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.551101] usb usb5: Product: xHCI Host Controller
[    1.551101] usb usb5: Manufacturer: Linux 5.1.2-arch1-1-ARCH xhci-hcd
[    1.551102] usb usb5: SerialNumber: 0000:05:00.0
[    1.551205] hub 5-0:1.0: USB hub found
[    1.551210] hub 5-0:1.0: 2 ports detected
[    1.551314] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    1.551315] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
[    1.551316] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.551338] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.551347] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[    1.551347] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.551348] usb usb6: Product: xHCI Host Controller
[    1.551348] usb usb6: Manufacturer: Linux 5.1.2-arch1-1-ARCH xhci-hcd
[    1.551348] usb usb6: SerialNumber: 0000:05:00.0
[    1.551458] hub 6-0:1.0: USB hub found
[    1.551462] hub 6-0:1.0: 2 ports detected
[    1.551518] usb: port power management may be unreliable
[    1.769458] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.803160] ata3: SATA link down (SStatus 4 SControl 300)
[    1.803349] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.803379] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.807238] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.807243] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.807248] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.807271] ata5: SATA link down (SStatus 4 SControl 300)
[    1.807298] ata4: SATA link down (SStatus 4 SControl 300)
[    1.807326] ata2: SATA link down (SStatus 4 SControl 300)
[    1.807430] ata1.00: ATA-9: PLEXTOR PX-128S3G, 1.04, max UDMA/133
[    1.807435] ata1.00: 250069680 sectors, multi 2: LBA48 NCQ (depth 32), AA
[    1.807453] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.807459] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.807463] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.809143] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.809149] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.809153] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.809280] ata1.00: configured for UDMA/133
[    1.809343] ata6.00: ATA-8: ST31000524AS, JC4B, max UDMA/133
[    1.809348] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32)
[    1.809732] scsi 0:0:0:0: Direct-Access     ATA      PLEXTOR PX-128S3 1.04 PQ: 0 ANSI: 5
[    1.812267] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.812273] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.812277] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.813493] ata6.00: configured for UDMA/133
[    1.813817] scsi 5:0:0:0: Direct-Access     ATA      ST31000524AS     JC4B PQ: 0 ANSI: 5
[    1.826137] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    1.826838] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.826860] sd 5:0:0:0: [sdb] Write Protect is off
[    1.826866] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.826905] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.827112] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.827174] sd 0:0:0:0: [sda] Write Protect is off
[    1.827180] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.827309] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.830368]  sda: sda1 sda2 sda3 sda4
[    1.831904] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.891651]  sdb: sdb1 sdb2
[    1.892741] sd 5:0:0:0: [sdb] Attached SCSI disk
[    1.972388] usb 3-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
[    1.972393] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.972396] usb 3-2: Product: USB2.0 Hub
[    1.972399] usb 3-2: Manufacturer: GenesysLogic
[    1.974251] usb 1-5: New USB device found, idVendor=1038, idProduct=1260, bcdDevice= 1.19
[    1.974256] usb 1-5: New USB device strings: Mfr=4, Product=5, SerialNumber=0
[    1.974259] usb 1-5: Product: SteelSeries Arctis 7
[    1.974262] usb 1-5: Manufacturer: SteelSeries
[    1.977800] hub 3-2:1.0: USB hub found
[    1.978137] hub 3-2:1.0: 3 ports detected
[    1.991189] hidraw: raw HID events driver (C) Jiri Kosina
[    2.005351] usbcore: registered new interface driver usbhid
[    2.005354] usbhid: USB HID core driver
[    2.011084] input: SteelSeries  SteelSeries Arctis 7 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.5/0003:1038:1260.0001/input/input3
[    2.066213] input: SteelSeries  SteelSeries Arctis 7 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.5/0003:1038:1260.0001/input/input5
[    2.066594] hid-generic 0003:1038:1260.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [SteelSeries  SteelSeries Arctis 7] on usb-0000:00:14.0-5/input5
[    2.093520] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    2.102785] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    2.116764] usb 4-2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.26
[    2.116769] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.116772] usb 4-2: Product: USB3.1 Hub
[    2.116775] usb 4-2: Manufacturer: GenesysLogic
[    2.119085] random: fast init done
[    2.123060] hub 4-2:1.0: USB hub found
[    2.123749] hub 4-2:1.0: 3 ports detected
[    2.244215] usb 1-7: New USB device found, idVendor=1532, idProduct=0202, bcdDevice= 2.00
[    2.244220] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.244223] usb 1-7: Product: Razer DeathStalker
[    2.244225] usb 1-7: Manufacturer: Razer
[    2.246700] input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:1532:0202.0002/input/input6
[    2.302905] hid-generic 0003:1532:0202.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathStalker] on usb-0000:00:14.0-7/input0
[    2.304361] input: Razer Razer DeathStalker Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:1532:0202.0003/input/input7
[    2.359562] input: Razer Razer DeathStalker Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:1532:0202.0003/input/input8
[    2.359626] input: Razer Razer DeathStalker System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:1532:0202.0003/input/input9
[    2.359687] input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:1532:0202.0003/input/input10
[    2.359786] hid-generic 0003:1532:0202.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathStalker] on usb-0000:00:14.0-7/input1
[    2.360731] input: Razer Razer DeathStalker as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.2/0003:1532:0202.0004/input/input11
[    2.360833] hid-generic 0003:1532:0202.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer DeathStalker] on usb-0000:00:14.0-7/input2
[    2.481620] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.482712] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    2.624180] usb 1-8: New USB device found, idVendor=1532, idProduct=0046, bcdDevice= 2.00
[    2.624184] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.624186] usb 1-8: Product: Razer Mamba Tournament Edition
[    2.624188] usb 1-8: Manufacturer: Razer
[    2.626037] input: Razer Razer Mamba Tournament Edition as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:1532:0046.0005/input/input12
[    2.626118] hid-generic 0003:1532:0046.0005: input,hidraw4: USB HID v1.11 Mouse [Razer Razer Mamba Tournament Edition] on usb-0000:00:14.0-8/input0
[    2.627119] input: Razer Razer Mamba Tournament Edition Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:1532:0046.0006/input/input13
[    2.635749] systemd[1]: systemd 242.29-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.652858] systemd[1]: Detected architecture x86-64.
[    2.665240] systemd[1]: Set hostname to <m9ffk4>.
[    2.682785] input: Razer Razer Mamba Tournament Edition Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:1532:0046.0006/input/input14
[    2.682806] input: Razer Razer Mamba Tournament Edition System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:1532:0046.0006/input/input15
[    2.682823] input: Razer Razer Mamba Tournament Edition as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:1532:0046.0006/input/input16
[    2.682860] hid-generic 0003:1532:0046.0006: input,hidraw5: USB HID v1.11 Keyboard [Razer Razer Mamba Tournament Edition] on usb-0000:00:14.0-8/input1
[    2.683346] input: Razer Razer Mamba Tournament Edition as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:1532:0046.0007/input/input17
[    2.739445] hid-generic 0003:1532:0046.0007: input,hidraw6: USB HID v1.11 Keyboard [Razer Razer Mamba Tournament Edition] on usb-0000:00:14.0-8/input2
[    2.752335] systemd[1]: Reached target Remote File Systems.
[    2.752400] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.752456] systemd[1]: Listening on Journal Audit Socket.
[    2.754045] systemd[1]: Listening on Process Core Dump Socket.
[    2.754067] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.757814] systemd[1]: Created slice User and Session Slice.
[    2.758055] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.765923] EXT4-fs (sda3): re-mounted. Opts: (null)
[    2.771104] random: systemd-random-: uninitialized urandom read (512 bytes read)
[    2.774914] random: lvm: uninitialized urandom read (4 bytes read)
[    2.862745] usb 1-14: new full-speed USB device number 5 using xhci_hcd
[    2.911944] audit: type=1130 audit(1558217376.326:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.917458] systemd-journald[359]: Received request to flush runtime journal from PID 1
[    2.923051] systemd-journald[359]: File /var/log/journal/8f435101d9d14056a12f7694ab763e8d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    2.947899] audit: type=1130 audit(1558217376.363:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.969528] audit: type=1130 audit(1558217376.386:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.003911] usb 1-14: New USB device found, idVendor=0b05, idProduct=1872, bcdDevice= 2.00
[    3.003920] usb 1-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.003922] usb 1-14: Product: AURA LED Controller
[    3.003930] usb 1-14: Manufacturer: AsusTek Computer Inc.
[    3.003931] usb 1-14: SerialNumber: 00000000001A
[    3.005542] hid-generic 0003:0B05:1872.0008: hiddev1,hidraw7: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:00:14.0-14/input0
[    3.057722] input: PC Speaker as /devices/platform/pcspkr/input/input18
[    3.058032] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    3.058069] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    3.059676] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.060150] mousedev: PS/2 mouse device common for all mice
[    3.062675] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    3.062676] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.062934] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    3.063017] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.063018] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.063018] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.063018] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.063019] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.063019] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.063935] asus_wmi: ASUS WMI generic driver loaded
[    3.064045] iTCO_vendor_support: vendor-support=0
[    3.065062] asus_wmi: Initialization: 0x0
[    3.065080] asus_wmi: BIOS WMI version: 0.9
[    3.065109] asus_wmi: SFUN value: 0x0
[    3.065494] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input19
[    3.065580] asus_wmi: Number of fans: 1
[    3.066709] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.066819] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    3.066953] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.072274] Linux agpgart interface v0.103
[    3.079052] cryptd: max_cpu_qlen set to 1000
[    3.089236] Adding 33554428k swap on /dev/sdb1.  Priority:-2 extents:1 across:33554428k FS
[    3.089903] AVX2 version of gcm_enc/dec engaged.
[    3.089904] AES CTR mode by8 optimization enabled
[    3.121042] audit: type=1130 audit(1558217376.536:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.137343] usbcore: registered new interface driver snd-usb-audio
[    3.155186] audit: type=1130 audit(1558217376.570:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2dlabel-home1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.160627] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    3.180580] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[    3.180580] mce: CPU8: Core temperature above threshold, cpu clock throttled (total events = 1)
[    3.180581] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.180582] mce: CPU11: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.180583] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.180583] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.180584] mce: CPU10: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.180585] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.180586] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.180586] mce: CPU9: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.180587] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.180588] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.180588] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.180588] mce: CPU8: Package temperature above threshold, cpu clock throttled (total events = 1)
[    3.187529] mce: CPU2: Core temperature/speed normal
[    3.187530] mce: CPU8: Core temperature/speed normal
[    3.187531] mce: CPU10: Package temperature/speed normal
[    3.187531] mce: CPU7: Package temperature/speed normal
[    3.187532] mce: CPU1: Package temperature/speed normal
[    3.187532] mce: CPU9: Package temperature/speed normal
[    3.187533] mce: CPU0: Package temperature/speed normal
[    3.187533] mce: CPU11: Package temperature/speed normal
[    3.187534] mce: CPU3: Package temperature/speed normal
[    3.187534] mce: CPU6: Package temperature/speed normal
[    3.187535] mce: CPU4: Package temperature/speed normal
[    3.187535] mce: CPU5: Package temperature/speed normal
[    3.187536] mce: CPU2: Package temperature/speed normal
[    3.187536] mce: CPU8: Package temperature/speed normal
[    3.209255] checking generic (c0000000 12f0000) vs hw (c0000000 10000000)
[    3.209255] fb0: switching to inteldrmfb from VESA VGA
[    3.233431] audit: type=1130 audit(1558217376.650:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2dlabel-boot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.235497] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[    3.237821] EXT4-fs (sda1): mounted filesystem without journal. Opts: block_validity,barrier,user_xattr,acl
[    3.239464] intel_rapl: Found RAPL domain package
[    3.239465] intel_rapl: Found RAPL domain core
[    3.239465] intel_rapl: Found RAPL domain uncore
[    3.239466] intel_rapl: Found RAPL domain dram
[    3.291619] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    3.292023] random: crng init done
[    3.373241] audit: type=1130 audit(1558217376.790:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2dlabel-home2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.375628] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 2c:fd:a1:6e:f5:9f
[    3.375631] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    3.375682] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[    3.377054] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    3.451395] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    3.466018] audit: type=1130 audit(1558217376.880:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.469026] audit: type=1127 audit(1558217376.883:10): pid=569 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[    3.485849] 8021q: 802.1Q VLAN Support v1.8
[    3.513108] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.515305] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.515326] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.515326] cfg80211: failed to load regulatory.db
[    3.625750] Console: switching to colour dummy device 80x25
[    3.625856] i915 0000:00:02.0: vgaarb: deactivate vga console
[    3.627220] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.627221] [drm] Driver supports precise vblank timestamp query.
[    3.627579] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.628969] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    3.896559] [drm] failed to retrieve link info, disabling eDP
[    3.912301] [drm] Initialized i915 1.6.0 20190207 for 0000:00:02.0 on minor 0
[    3.913822] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.913936] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20
[    3.914096] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    3.944046] fbcon: inteldrmfb (fb0) is primary device
[    3.972087] Console: switching to colour frame buffer device 430x90
[    3.998493] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.088366] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    4.088372] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.088376] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    4.088378] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    4.088381] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    4.088383] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    4.088386] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    4.088389] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    4.088392] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    5.120114] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input21
[    5.120151] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input22
[    5.120191] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card1/input23
[    5.120224] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card1/input24
[    5.120258] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card1/input25
[    5.120311] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card1/input26
[    5.120384] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card1/input27
[    5.120438] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input28
[    5.121092] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input29
[    5.121155] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input30
[    5.121226] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card1/input31
[    5.993784] kauditd_printk_skb: 6 callbacks suppressed
[    5.993785] audit: type=1130 audit(1558217379.410:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@974 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.000943] audit: type=1006 audit(1558217379.416:18): pid=625 uid=0 old-auid=4294967295 auid=974 tty=(none) old-ses=4294967295 ses=1 res=1
[    6.037798] audit: type=1130 audit(1558217379.453:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@974 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.585121] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[    6.585194] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[    6.960997] audit: type=1130 audit(1558217380.376:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.007674] audit: type=1130 audit(1558217380.423:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.160318] audit: type=1130 audit(1558217380.576:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.492374] audit: type=1006 audit(1558217385.906:23): pid=761 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   12.501052] audit: type=1130 audit(1558217385.916:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.504476] audit: type=1006 audit(1558217385.920:25): pid=765 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   12.523641] systemd-journald[359]: File /var/log/journal/8f435101d9d14056a12f7694ab763e8d/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   12.524150] audit: type=1130 audit(1558217385.940:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   13.274529] audit: type=1130 audit(1558217386.690:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.163077] audit: type=1701 audit(1558217391.580:28): auid=1000 uid=1000 gid=985 ses=2 pid=1641 comm="vulkandriverque" exe="/home/m9ffk4/.local/share/Steam/ubuntu12_64/vulkandriverquery" sig=6 res=1
[   18.186976] audit: type=1130 audit(1558217391.603:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-1643-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.428996] audit: type=1131 audit(1558217391.843:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@0-1643-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.814000] audit: type=1131 audit(1558217396.230:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@974 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.819348] audit: type=1131 audit(1558217396.233:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@974 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  911.995713] audit: type=1130 audit(1558218285.410:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  911.995724] audit: type=1131 audit(1558218285.410:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1916.150575] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 47)
[ 1916.150575] mce: CPU8: Core temperature above threshold, cpu clock throttled (total events = 47)
[ 1916.150576] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.150578] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.150578] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.150579] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.150580] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.150581] mce: CPU10: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.150581] mce: CPU9: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.150582] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.150582] mce: CPU8: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.150583] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.150601] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.150601] mce: CPU11: Package temperature above threshold, cpu clock throttled (total events = 70)
[ 1916.162625] mce: CPU2: Core temperature/speed normal
[ 1916.162625] mce: CPU8: Core temperature/speed normal
[ 1916.162626] mce: CPU6: Package temperature/speed normal
[ 1916.162627] mce: CPU0: Package temperature/speed normal
[ 1916.162628] mce: CPU9: Package temperature/speed normal
[ 1916.162628] mce: CPU11: Package temperature/speed normal
[ 1916.162629] mce: CPU4: Package temperature/speed normal
[ 1916.162630] mce: CPU3: Package temperature/speed normal
[ 1916.162630] mce: CPU5: Package temperature/speed normal
[ 1916.162631] mce: CPU10: Package temperature/speed normal
[ 1916.162632] mce: CPU8: Package temperature/speed normal
[ 1916.162632] mce: CPU2: Package temperature/speed normal
[ 1916.162654] mce: CPU1: Package temperature/speed normal
[ 1916.162654] mce: CPU7: Package temperature/speed normal
[ 2301.025628] mce: CPU8: Core temperature above threshold, cpu clock throttled (total events = 1778)
[ 2301.025629] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 1778)
[ 2301.025630] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.025631] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.025632] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.025633] mce: CPU10: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.025633] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.025634] mce: CPU11: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.025635] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.025635] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.025636] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.025636] mce: CPU8: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.025655] mce: CPU9: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.025655] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 5011)
[ 2301.026615] mce: CPU2: Core temperature/speed normal
[ 2301.026616] mce: CPU8: Core temperature/speed normal
[ 2301.026616] mce: CPU5: Package temperature/speed normal
[ 2301.026617] mce: CPU7: Package temperature/speed normal
[ 2301.026618] mce: CPU0: Package temperature/speed normal
[ 2301.026619] mce: CPU10: Package temperature/speed normal
[ 2301.026619] mce: CPU9: Package temperature/speed normal
[ 2301.026620] mce: CPU1: Package temperature/speed normal
[ 2301.026620] mce: CPU3: Package temperature/speed normal
[ 2301.026621] mce: CPU11: Package temperature/speed normal
[ 2301.026622] mce: CPU6: Package temperature/speed normal
[ 2301.026622] mce: CPU4: Package temperature/speed normal
[ 2301.026623] mce: CPU8: Package temperature/speed normal
[ 2301.026623] mce: CPU2: Package temperature/speed normal
[ 2413.620620] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 1919)
[ 2413.620621] mce: CPU9: Core temperature above threshold, cpu clock throttled (total events = 1919)
[ 2413.634627] mce: CPU3: Core temperature/speed normal
[ 2413.634627] mce: CPU9: Core temperature/speed normal
[ 3363.745590] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 3576)
[ 3363.745590] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 3576)
[ 3363.745593] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.745593] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.745651] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.745651] mce: CPU10: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.745652] mce: CPU9: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.745653] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.745654] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.745655] mce: CPU8: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.745655] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.745656] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.745657] mce: CPU11: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.745658] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 25070)
[ 3363.750597] mce: CPU7: Core temperature/speed normal
[ 3363.750597] mce: CPU1: Core temperature/speed normal
[ 3363.750598] mce: CPU10: Package temperature/speed normal
[ 3363.750598] mce: CPU4: Package temperature/speed normal
[ 3363.750599] mce: CPU7: Package temperature/speed normal
[ 3363.750599] mce: CPU1: Package temperature/speed normal
[ 3363.750619] mce: CPU11: Package temperature/speed normal
[ 3363.750620] mce: CPU5: Package temperature/speed normal
[ 3363.750652] mce: CPU0: Package temperature/speed normal
[ 3363.750652] mce: CPU6: Package temperature/speed normal
[ 3363.750653] mce: CPU2: Package temperature/speed normal
[ 3363.750653] mce: CPU8: Package temperature/speed normal
[ 3363.750654] mce: CPU9: Package temperature/speed normal
[ 3363.750654] mce: CPU3: Package temperature/speed normal
[ 4205.630886] tun: Universal TUN/TAP device driver, 1.6
[ 4697.240590] mce: CPU8: Core temperature above threshold, cpu clock throttled (total events = 14017)
[ 4697.240591] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 14017)
[ 4697.240592] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.240593] mce: CPU9: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.240594] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.240594] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.240595] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.240595] mce: CPU8: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.240600] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.240600] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.240611] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.240612] mce: CPU11: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.240625] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.240626] mce: CPU10: Package temperature above threshold, cpu clock throttled (total events = 25200)
[ 4697.242599] mce: CPU2: Core temperature/speed normal
[ 4697.242599] mce: CPU8: Core temperature/speed normal
[ 4697.242601] mce: CPU3: Package temperature/speed normal
[ 4697.242601] mce: CPU9: Package temperature/speed normal
[ 4697.242602] mce: CPU5: Package temperature/speed normal
[ 4697.242604] mce: CPU11: Package temperature/speed normal
[ 4697.242604] mce: CPU1: Package temperature/speed normal
[ 4697.242605] mce: CPU4: Package temperature/speed normal
[ 4697.242606] mce: CPU10: Package temperature/speed normal
[ 4697.242608] mce: CPU7: Package temperature/speed normal
[ 4697.242609] mce: CPU8: Package temperature/speed normal
[ 4697.242610] mce: CPU2: Package temperature/speed normal
[ 4697.242625] mce: CPU0: Package temperature/speed normal
[ 4697.242626] mce: CPU6: Package temperature/speed normal
[ 5046.448621] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 16506)
[ 5046.448622] mce: CPU8: Core temperature above threshold, cpu clock throttled (total events = 16506)
[ 5046.448623] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.448624] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.448625] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.448626] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.448626] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.448627] mce: CPU9: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.448628] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.448629] mce: CPU11: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.448629] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.448630] mce: CPU10: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.448630] mce: CPU8: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.448631] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 30666)
[ 5046.450612] mce: CPU2: Core temperature/speed normal
[ 5046.450613] mce: CPU8: Core temperature/speed normal
[ 5046.450614] mce: CPU1: Package temperature/speed normal
[ 5046.450614] mce: CPU11: Package temperature/speed normal
[ 5046.450615] mce: CPU10: Package temperature/speed normal
[ 5046.450616] mce: CPU4: Package temperature/speed normal
[ 5046.450616] mce: CPU5: Package temperature/speed normal
[ 5046.450617] mce: CPU7: Package temperature/speed normal
[ 5046.450618] mce: CPU9: Package temperature/speed normal
[ 5046.450618] mce: CPU3: Package temperature/speed normal
[ 5046.450619] mce: CPU6: Package temperature/speed normal
[ 5046.450619] mce: CPU0: Package temperature/speed normal
[ 5046.450620] mce: CPU8: Package temperature/speed normal
[ 5046.450620] mce: CPU2: Package temperature/speed normal
[ 9726.180924] usb 3-2: USB disconnect, device number 2
[ 9726.434313] usb 4-2: USB disconnect, device number 2
[35039.153130] perf: interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 79200
[38045.799518] usb 4-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[38045.824631] usb 4-2: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.26
[38045.824638] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[38045.824643] usb 4-2: Product: USB3.1 Hub
[38045.824648] usb 4-2: Manufacturer: GenesysLogic
[38045.832203] hub 4-2:1.0: USB hub found
[38045.832882] hub 4-2:1.0: 3 ports detected
[38046.005440] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[38046.151396] usb 3-2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
[38046.151402] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[38046.151405] usb 3-2: Product: USB2.0 Hub
[38046.151408] usb 3-2: Manufacturer: GenesysLogic
[38046.157251] hub 3-2:1.0: USB hub found
[38046.157514] hub 3-2:1.0: 3 ports detected
[38047.229111] usb 3-2-port1: Cannot enable. Maybe the USB cable is bad?
p.s. с очень большой долей вероятности дело тут в железе…
Какие идеи есть?
Железо то рабочее. Более чем уверен что при возврате на win будет все норм, но не хочу обратно
ну для начала, нужно просмотреть bios на возможность включения/отключения дискретной графики...
выключить встроенную, и включить дискретную.
дописать к параметрам ядра
pci=nocrs
и dmesg опять сюда..
Ошибки в тексте-неповторимый стиль автора©
В дополнение к рекомендациям indeviral
Посмотри в BIOS - возможно дискретка отключена, а может и шина (так как Desktop, то BIOS должен быть информативен)
Плюс к этому попробуй загрузиться с параметром rescue и посмотри выводы
dmesg | grep 01:00.0 и cat /proc/iomem | grep 01:00.0

PS - писали практически одновременно с indeviral...

EDIT 1 - в части опций загрузки pci=option - попробуй методом проб из списка параметров (там их много - имеется ввиду те что относятся к pci=)
Ошибки не исчезают с опытом - они просто умнеют
vasek
EDIT 1 - в части опций загрузки pci=option - попробуй методом проб из списка параметров (там их много - имеется ввиду те что относятся к pci=)
+ начинайте с этих
pci=nocrs
pci=biosirq
и выключите всё что связано с виртуализацией и
iommu=off
Ошибки в тексте-неповторимый стиль автора©
Bios говорит что карты нет оО
 
Зарегистрироваться или войдите чтобы оставить сообщение.