Установка Arhc на Hiper-V

pavelkq	# 7 лет, 9 месяцев назад (отредактировано 7 лет, 9 месяцев назад)
Темы: 7 Сообщения: 31 Участник с: 11 августа 2017	Установил Арч на виртуалку под Hyper-V. Хочу запустить иксы. Делаю по науке lspci -v \| grep VGA, но в результате вообще ничего не выводится. Собственно, lspci без параметров тоже не выводит ничего! Dmesg выводит следующее: # dmesg [ 0.000000] Linux version 4.12.4-1-ARCH (builduser@nspawn-9860) (gcc version 7.1.1 20170630 (GCC) ) #1 SMP PREEMPT Fri Jul 28 18:54:18 UTC 2017 [ 0.000000] Command line: root=/dev/sda3 rw resum=/dev/sda2 initrd=/initramfs-linux.img [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000f6ce8fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f6ce9000-0x00000000f6ce9fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000f6cea000-0x00000000f6cf0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f6cf1000-0x00000000f6cf1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000f6cf2000-0x00000000f6d1afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f6d1b000-0x00000000f7d9afff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f7d9b000-0x00000000f7df2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f7df3000-0x00000000f7dfafff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000f7dfb000-0x00000000f7dfefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000f7dff000-0x00000000f7dfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000101ffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by EDK II [ 0.000000] efi: ACPI=0xf7dfa000 ACPI 2.0=0xf7dfa014 SMBIOS=0xf7df2000 [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [ 0.000000] Hypervisor detected: Microsoft HyperV [ 0.000000] HyperV: features 0xe7f, hints 0x2c [ 0.000000] Hyper-V Host Build:9600-6.3-18-0.18119 [ 0.000000] HyperV: LAPIC Timer Frequency: 0xa2c2a [ 0.000000] tsc: Marking TSC unstable due to running on Hyper-V [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Unable to calibrate against PIT [ 0.000000] tsc: No reference (HPET/PMTIMER) available [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x102000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00000000000 mask 3FF00000000 write-back [ 0.000000] 1 base 00100000000 mask 3F000000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xf7e00 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff898780099000] 99000 size 24576 [ 0.000000] BRK [0x5fd5f000, 0x5fd5ffff] PGTABLE [ 0.000000] BRK [0x5fd60000, 0x5fd60fff] PGTABLE [ 0.000000] BRK [0x5fd61000, 0x5fd61fff] PGTABLE [ 0.000000] BRK [0x5fd62000, 0x5fd62fff] PGTABLE [ 0.000000] BRK [0x5fd63000, 0x5fd63fff] PGTABLE [ 0.000000] BRK [0x5fd64000, 0x5fd64fff] PGTABLE [ 0.000000] BRK [0x5fd65000, 0x5fd65fff] PGTABLE [ 0.000000] BRK [0x5fd66000, 0x5fd66fff] PGTABLE [ 0.000000] Secure boot disabled [ 0.000000] RAMDISK: [mem 0x7fa0a000-0x7fffefff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000F7DFA014 000024 (v02 VRTUAL) [ 0.000000] ACPI: XSDT 0x00000000F7DF90E8 00005C (v01 VRTUAL MICROSFT 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000F7DF7000 0000F4 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001) [ 0.000000] ACPI: DSDT 0x00000000F7DF4000 000D8E (v02 MSFTVM DSDT01 00000001 MSFT 04000000) [ 0.000000] ACPI: FACS 0x00000000F7DFE000 000040 [ 0.000000] ACPI: APIC 0x00000000F7DF8000 00024C (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) [ 0.000000] ACPI: OEM0 0x00000000F7DF6000 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) [ 0.000000] ACPI: WAET 0x00000000F7DF5000 000028 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) [ 0.000000] ACPI: OEM1 0x00000000F7DF3000 00009E (v02 MSFTVM UARTS 00000001 MSFT 04000000) [ 0.000000] ACPI: SRAT 0x00000000F6CF1000 0000E0 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) [ 0.000000] ACPI: BGRT 0x00000000F6CE9000 000038 (v01 INTEL TIANO 00000001 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xf7ffffff] [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x101ffffff] [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x102200000-0xfdfffffff] hotplug [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x1000000000-0x100281fffff] hotplug [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xf7ffffff] + [mem 0x100000000-0x101ffffff] -> [mem 0x00000000-0x101ffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x101ff9000-0x101ffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000101ffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000f6ce8fff] [ 0.000000] node 0: [mem 0x00000000f6d1b000-0x00000000f7d9afff] [ 0.000000] node 0: [mem 0x00000000f7dff000-0x00000000f7dfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000101ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000101ffffff] [ 0.000000] On node 0 totalpages: 1023241 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 55 pages reserved [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 1011050 pages, LIFO batch:31 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 8192 pages, LIFO batch:0 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] efi_bgrt: Ignoring BGRT: invalid image address [ 0.000000] smpboot: Allowing 64 CPUs, 63 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf6ce9000-0xf6ce9fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf6cea000-0xf6cf0fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf6cf1000-0xf6cf1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf6cf2000-0xf6d1afff] [ 0.000000] PM: Registered nosave memory: [mem 0xf7d9b000-0xf7df2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xf7df3000-0xf7dfafff] [ 0.000000] PM: Registered nosave memory: [mem 0xf7dfb000-0xf7dfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xf7e00000-0xffffffff] [ 0.000000] e820: [mem 0xf7e00000-0xffffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:64 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff898880600000 s106328 r8192 d28840 u262144 [ 0.000000] pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.000000] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 43 44 45 46 47 [ 0.000000] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 [0] 56 57 58 59 60 61 62 63 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1006674 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda3 rw resum=/dev/sda2 initrd=/initramfs-linux.img [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3902732K/4092964K available (6539K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 190232K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1 [ 0.000000] ftrace: allocating 27931 entries in 110 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=64. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64 [ 0.000000] Using NULL legacy PIC [ 0.000000] NR_IRQS:8448 nr_irqs:936 0 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: Unable to calibrate against PIT [ 0.000000] tsc: using PMTIMER reference calibration [ 0.000000] tsc: Detected 2347.239 MHz processor [ 0.000048] Calibrating delay loop (skipped), value calculated using timer frequency.. 4696.08 BogoMIPS (lpj=7824130) [ 0.000053] pid_max: default: 65536 minimum: 512 [ 0.000126] ACPI: Core revision 20170303 [ 0.001418] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.001843] Security Framework initialized [ 0.001845] Yama: becoming mindful. [ 0.002357] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003333] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003333] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.003333] mce: CPU supports 1 MCE banks [ 0.003333] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.003333] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.003333] smpboot: Max logical packages: 64 [ 0.003333] Switched APIC routing to physical flat. [ 0.003333] clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns [ 0.003333] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz (family: 0x6, model: 0x3f, stepping: 0x2) [ 0.013376] Performance Events: unsupported p6 CPU model 63 no PMU driver, software events only. [ 0.034198] NMI watchdog: disabled (cpu0): hardware events not enabled [ 0.034200] NMI watchdog: Shutting down hard lockup detector on all cpus [ 0.040012] smp: Bringing up secondary CPUs ... [ 0.040016] smp: Brought up 1 node, 1 CPU [ 0.040020] smpboot: Total of 1 processors activated (4696.08 BogoMIPS) [ 0.040754] devtmpfs: initialized [ 0.040848] x86/mm: Memory block size: 128MB [ 0.046700] PM: Registering ACPI NVS region [mem 0xf7dfb000-0xf7dfefff] (16384 bytes) [ 0.046855] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.046949] futex hash table entries: 16384 (order: 8, 1048576 bytes) [ 0.047506] pinctrl core: initialized pinctrl subsystem [ 0.048068] RTC time: 11:26:18, date: 08/11/17 [ 0.048322] NET: Registered protocol family 16 [ 0.050038] cpuidle: using governor ladder [ 0.050053] cpuidle: using governor menu [ 0.050056] PCCT header not found. [ 0.050104] ACPI: bus type PCI registered [ 0.050107] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.050603] PCI: Fatal: No config space access function found [ 0.053446] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.066857] ACPI: Added _OSI(Module Device) [ 0.066859] ACPI: Added _OSI(Processor Device) [ 0.066860] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.066862] ACPI: Added _OSI(Processor Aggregator Device) [ 0.068324] ACPI: Executed 1 blocks of module-level executable AML code [ 0.070479] ACPI: Interpreter enabled [ 0.070506] ACPI: (supports S0 S5) [ 0.070508] ACPI: Using IOAPIC for interrupt routing [ 0.070539] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.076526] ACPI: Enabled 1 GPEs in block 00 to 0F [ 0.076666] vgaarb: loaded [ 0.076722] EDAC MC: Ver: 3.0.0 [ 0.080028] Registered efivars operations [ 0.083359] PCI: Using ACPI for IRQ routing [ 0.083361] PCI: System does not support PCI [ 0.083585] NetLabel: Initializing [ 0.083586] NetLabel: domain hash size = 128 [ 0.083587] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.083615] NetLabel: unlabeled traffic allowed by default [ 0.086745] clocksource: Switched to clocksource hyperv_clocksource_tsc_page [ 0.104590] VFS: Disk quotas dquot_6.6.0 [ 0.104672] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.104861] pnp: PnP ACPI init [ 0.105005] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.105010] pnp: PnP ACPI: found 1 devices [ 0.111305] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.111310] intel_mid_msgbus_init: Error: msgbus PCI handle NULL [ 0.111431] NET: Registered protocol family 2 [ 0.111950] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.112070] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.112194] TCP: Hash tables configured (established 32768 bind 32768) [ 0.112473] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.112507] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.112881] NET: Registered protocol family 1 [ 0.112889] PCI: CLS 0 bytes, default 64 [ 0.112972] Unpacking initramfs... [ 0.292912] Freeing initrd memory: 6100K [ 0.292919] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.292924] software IO TLB [mem 0xeec00000-0xf2c00000] (64MB) mapped at [ffff89886ec00000-ffff898872bfffff] [ 0.293085] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21d585ee0d5, max_idle_ns: 440795238333 ns [ 0.293153] Scanning for low memory corruption every 60 seconds [ 0.294747] Initialise system trusted keyrings [ 0.294762] Key type blacklist registered [ 0.294852] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 0.296682] zbud: loaded [ 0.302222] Key type asymmetric registered [ 0.302241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.305659] io scheduler noop registered [ 0.305661] io scheduler deadline registered [ 0.305736] io scheduler cfq registered (default) [ 0.305738] io scheduler mq-deadline registered [ 0.305739] io scheduler kyber registered [ 0.305791] io scheduler bfq registered [ 0.305892] efifb: probing for efifb [ 0.305909] efifb: framebuffer at 0xf8000000, using 3072k, total 3072k [ 0.305911] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.305912] efifb: scrolling: redraw [ 0.305914] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.309882] Console: switching to colour frame buffer device 128x48 [ 0.312677] fb0: EFI VGA frame buffer device [ 0.312691] intel_idle: does not run on family 6 model 63 [ 0.312790] GHES: HEST is not enabled! [ 0.312885] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.313343] Linux agpgart interface v0.103 [ 0.313720] rtc_cmos 00:00: RTC can wake from S4 [ 0.315261] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 0.316051] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram [ 0.316148] ledtrig-cpu: registered to indicate activity on CPUs [ 0.316682] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized [ 0.317027] NET: Registered protocol family 10 [ 0.325245] Segment Routing with IPv6 [ 0.325273] NET: Registered protocol family 17 [ 0.325493] RAS: Correctable Errors collector initialized. [ 0.325682] registered taskstats version 1 [ 0.325700] Loading compiled-in X.509 certificates [ 0.325721] zswap: loaded using pool lzo/zbud [ 0.326130] Magic number: 13:378:428 [ 0.326671] rtc_cmos 00:00: setting system clock to 2017-08-11 11:26:19 UTC (1502450779) [ 0.327806] PM: Hibernation image not present or could not be loaded. [ 0.330040] Freeing unused kernel memory: 1324K [ 0.330040] Write protecting the kernel read-only data: 10240k [ 0.331007] Freeing unused kernel memory: 1640K [ 0.458809] hv_vmbus: Vmbus version:3.0 [ 0.507498] hv_vmbus: registering driver hyperv_keyboard [ 0.509110] hidraw: raw HID events driver (C) Jiri Kosina [ 0.509424] hv_vmbus: registering driver hid_hyperv [ 0.513950] input: Microsoft Vmbus HID-compliant Mouse as /devices/0006:045E:0621.0001/input/input0 [ 0.513960] hid 0006:045E:0621.0001: input: <UNKNOWN> HID v0.01 Mouse [Microsoft Vmbus HID-compliant Mouse] on [ 0.514816] SCSI subsystem initialized [ 0.515887] hv_vmbus: registering driver hv_storvsc [ 0.516963] input: AT Translated Set 2 keyboard as /devices/LNXSYSTM:00/LNXSYBUS:00/ACPI0004:00/VMBUS:00/d34b2567-b9b6-42b9-8778-0a4ec0b955bf/serio0/input/input1 [ 0.527142] scsi host0: storvsc_host_t [ 0.531587] scsi 0:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 4 [ 0.544067] scsi 0:0:0:1: CD-ROM Msft Virtual DVD-ROM 1.0 PQ: 0 ANSI: 0 [ 0.629250] sr 0:0:0:1: [sr0] scsi-1 drive [ 0.629253] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.629726] sr 0:0:0:1: Attached scsi CD-ROM sr0 [ 0.635722] sd 0:0:0:0: [sda] 4194304000 512-byte logical blocks: (2.15 TB/1.95 TiB) [ 0.635725] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.636968] sd 0:0:0:0: [sda] Write Protect is off [ 0.636972] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00 [ 0.637081] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.654077] sda: sda1 sda2 sda3 sda4 [ 0.656499] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.676738] random: fast init done [ 0.953947] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 1.124708] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.129624] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) [ 1.129715] systemd[1]: Detected virtualization microsoft. [ 1.129721] systemd[1]: Detected architecture x86-64. [ 1.130636] systemd[1]: Set hostname to <AL-Pasha>. [ 1.318714] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.321232] systemd[1]: Listening on Process Core Dump Socket. [ 1.321485] systemd[1]: Reached target Login Prompts. [ 1.321658] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 1.321883] systemd[1]: Reached target Remote File Systems. [ 1.322024] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 1.504655] systemd-journald[182]: Received request to flush runtime journal from PID 1 [ 1.656175] systemd-journald[182]: File /var/log/journal/6a410b79eaee4caebdb4739d7e95d45f/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 1.750006] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 10737418240 ms ovfl timer [ 1.750009] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules [ 1.750010] RAPL PMU: hw unit of domain package 2^-0 Joules [ 1.750011] RAPL PMU: hw unit of domain dram 2^-0 Joules [ 1.750011] RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules [ 1.789160] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 1.791369] mousedev: PS/2 mouse device common for all mice [ 1.828402] AVX2 version of gcm_enc/dec engaged. [ 1.828404] AES CTR mode by8 optimization enabled [ 1.858806] hv_vmbus: registering driver hv_netvsc [ 1.862698] hv_vmbus: registering driver hv_balloon [ 1.864191] hv_vmbus: registering driver hyperv_fb [ 1.865765] pps_core: LinuxPPS API ver. 1 registered [ 1.865767] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.867761] PTP clock support registered [ 1.875951] hv_utils: Registering HyperV Utility Driver [ 1.875953] hv_vmbus: registering driver hv_util [ 1.960705] EDAC sbridge: Seeking for: PCI ID 8086:2fa0 [ 1.960709] EDAC sbridge: Ver: 1.1.1 [ 1.970012] hv_balloon: Using Dynamic Memory protocol version 1.0 [ 1.974596] checking generic (f8000000 300000) vs hw (f8000000 300000) [ 1.974598] fb: switching to hyperv_fb from EFI VGA [ 1.974635] Console: switching to colour dummy device 80x25 [ 1.974754] hyperv_fb: Screen resolution: 1152x864, Color depth: 32 [ 1.975545] Console: switching to colour frame buffer device 144x54 [ 2.009153] hv_utils: FCopy IC version 1.1 [ 2.009266] hv_utils: Heartbeat IC version 3.0 [ 2.011632] hv_utils: Shutdown IC version 3.0 [ 2.011968] hv_utils: TimeSync IC version 3.0 [ 2.014595] hv_utils: VSS IC version 5.0 [ 2.117383] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k FS [ 2.451481] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 2.944869] random: crng init done [ 3.290564] sddm[285]: segfault at 700 ip 0000000000000700 sp 00007ffe545ce078 error 14 in sddm[400000+72000] [ 3.898816] sddm[340]: segfault at 1fb8170 ip 0000000001fb8170 sp 00007ffce9536458 error 15 [ 4.505446] sddm[358]: segfault at 17ede60 ip 00000000017ede60 sp 00007ffcb2bc2668 error 15 [ 5.092461] sddm[376]: segfault at 2a74656b63 ip 0000002a74656b63 sp 00007ffd766cd3b8 error 14 [ 5.899164] sddm[393]: segfault at 30 ip 0000000000000030 sp 00007ffeeeaf67e8 error 14 in sddm[400000+72000] [ 49.590145] hv_balloon: INFO_TYPE_MAX_PAGE_CNT = 268435456 [ 57.653493] hv_utils: KVP IC version 4.0 [ 94.260495] hv_balloon: Balloon request will be partially fulfilled. Balloon floor reached. [ 94.263874] hv_balloon: Balloon request will be partially fulfilled. Balloon floor reached. Иксы я уже установил (как понял, установка должна была сама понять, какая у меня видюха или поставить стандартный драйвер), но при загрузке экран несколько раз мерцает и на этом замирает всё. Последняя запись Reached target Graphical Interface.

# 7 лет, 9 месяцев назад (отредактировано 7 лет, 9 месяцев назад)

Сообщения: 31

Участник с: 11 августа 2017

Установил Арч на виртуалку под Hyper-V. Хочу запустить иксы. Делаю по науке lspci -v | grep VGA, но в результате вообще ничего не выводится. Собственно, lspci без параметров тоже не выводит ничего! Dmesg выводит следующее:

# dmesg
[    0.000000] Linux version 4.12.4-1-ARCH (builduser@nspawn-9860) (gcc version 7.1.1 20170630 (GCC) ) #1 SMP PREEMPT Fri Jul 28 18:54:18 UTC 2017
[    0.000000] Command line: root=/dev/sda3 rw resum=/dev/sda2 initrd=/initramfs-linux.img
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000f6ce8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f6ce9000-0x00000000f6ce9fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000f6cea000-0x00000000f6cf0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f6cf1000-0x00000000f6cf1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000f6cf2000-0x00000000f6d1afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f6d1b000-0x00000000f7d9afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f7d9b000-0x00000000f7df2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f7df3000-0x00000000f7dfafff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000f7dfb000-0x00000000f7dfefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000f7dff000-0x00000000f7dfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000101ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by EDK II
[    0.000000] efi:  ACPI=0xf7dfa000  ACPI 2.0=0xf7dfa014  SMBIOS=0xf7df2000
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012
[    0.000000] Hypervisor detected: Microsoft HyperV
[    0.000000] HyperV: features 0xe7f, hints 0x2c
[    0.000000] Hyper-V Host Build:9600-6.3-18-0.18119
[    0.000000] HyperV: LAPIC Timer Frequency: 0xa2c2a
[    0.000000] tsc: Marking TSC unstable due to running on Hyper-V
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x102000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00000000000 mask 3FF00000000 write-back
[    0.000000]   1 base 00100000000 mask 3F000000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT
[    0.000000] e820: last_pfn = 0xf7e00 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff898780099000] 99000 size 24576
[    0.000000] BRK [0x5fd5f000, 0x5fd5ffff] PGTABLE
[    0.000000] BRK [0x5fd60000, 0x5fd60fff] PGTABLE
[    0.000000] BRK [0x5fd61000, 0x5fd61fff] PGTABLE
[    0.000000] BRK [0x5fd62000, 0x5fd62fff] PGTABLE
[    0.000000] BRK [0x5fd63000, 0x5fd63fff] PGTABLE
[    0.000000] BRK [0x5fd64000, 0x5fd64fff] PGTABLE
[    0.000000] BRK [0x5fd65000, 0x5fd65fff] PGTABLE
[    0.000000] BRK [0x5fd66000, 0x5fd66fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7fa0a000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000F7DFA014 000024 (v02 VRTUAL)
[    0.000000] ACPI: XSDT 0x00000000F7DF90E8 00005C (v01 VRTUAL MICROSFT 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000F7DF7000 0000F4 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001)
[    0.000000] ACPI: DSDT 0x00000000F7DF4000 000D8E (v02 MSFTVM DSDT01   00000001 MSFT 04000000)
[    0.000000] ACPI: FACS 0x00000000F7DFE000 000040
[    0.000000] ACPI: APIC 0x00000000F7DF8000 00024C (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
[    0.000000] ACPI: OEM0 0x00000000F7DF6000 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[    0.000000] ACPI: WAET 0x00000000F7DF5000 000028 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[    0.000000] ACPI: OEM1 0x00000000F7DF3000 00009E (v02 MSFTVM UARTS    00000001 MSFT 04000000)
[    0.000000] ACPI: SRAT 0x00000000F6CF1000 0000E0 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
[    0.000000] ACPI: BGRT 0x00000000F6CE9000 000038 (v01 INTEL  TIANO    00000001 MSFT 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0xf7ffffff]
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x101ffffff]
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x102200000-0xfdfffffff] hotplug
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x1000000000-0x100281fffff] hotplug
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xf7ffffff] + [mem 0x100000000-0x101ffffff] -> [mem 0x00000000-0x101ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x101ff9000-0x101ffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000101ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000f6ce8fff]
[    0.000000]   node   0: [mem 0x00000000f6d1b000-0x00000000f7d9afff]
[    0.000000]   node   0: [mem 0x00000000f7dff000-0x00000000f7dfffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000101ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000101ffffff]
[    0.000000] On node 0 totalpages: 1023241
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 55 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 1011050 pages, LIFO batch:31
[    0.000000]   Normal zone: 128 pages used for memmap
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] efi_bgrt: Ignoring BGRT: invalid image address
[    0.000000] smpboot: Allowing 64 CPUs, 63 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf6ce9000-0xf6ce9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf6cea000-0xf6cf0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf6cf1000-0xf6cf1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf6cf2000-0xf6d1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xf7d9b000-0xf7df2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf7df3000-0xf7dfafff]
[    0.000000] PM: Registered nosave memory: [mem 0xf7dfb000-0xf7dfefff]
[    0.000000] PM: Registered nosave memory: [mem 0xf7e00000-0xffffffff]
[    0.000000] e820: [mem 0xf7e00000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:64 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff898880600000 s106328 r8192 d28840 u262144
[    0.000000] pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[    0.000000] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 43 44 45 46 47
[    0.000000] pcpu-alloc: [0] 48 49 50 51 52 53 54 55 [0] 56 57 58 59 60 61 62 63
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1006674
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda3 rw resum=/dev/sda2 initrd=/initramfs-linux.img
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3902732K/4092964K available (6539K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 190232K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
[    0.000000] ftrace: allocating 27931 entries in 110 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=64.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64
[    0.000000] Using NULL legacy PIC
[    0.000000] NR_IRQS:8448 nr_irqs:936 0
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: using PMTIMER reference calibration
[    0.000000] tsc: Detected 2347.239 MHz processor
[    0.000048] Calibrating delay loop (skipped), value calculated using timer frequency.. 4696.08 BogoMIPS (lpj=7824130)
[    0.000053] pid_max: default: 65536 minimum: 512
[    0.000126] ACPI: Core revision 20170303
[    0.001418] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.001843] Security Framework initialized
[    0.001845] Yama: becoming mindful.
[    0.002357] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003333] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003333] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.003333] mce: CPU supports 1 MCE banks
[    0.003333] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.003333] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.003333] smpboot: Max logical packages: 64
[    0.003333] Switched APIC routing to physical flat.
[    0.003333] clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[    0.003333] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz (family: 0x6, model: 0x3f, stepping: 0x2)
[    0.013376] Performance Events: unsupported p6 CPU model 63 no PMU driver, software events only.
[    0.034198] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.034200] NMI watchdog: Shutting down hard lockup detector on all cpus
[    0.040012] smp: Bringing up secondary CPUs ...
[    0.040016] smp: Brought up 1 node, 1 CPU
[    0.040020] smpboot: Total of 1 processors activated (4696.08 BogoMIPS)
[    0.040754] devtmpfs: initialized
[    0.040848] x86/mm: Memory block size: 128MB
[    0.046700] PM: Registering ACPI NVS region [mem 0xf7dfb000-0xf7dfefff] (16384 bytes)
[    0.046855] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.046949] futex hash table entries: 16384 (order: 8, 1048576 bytes)
[    0.047506] pinctrl core: initialized pinctrl subsystem
[    0.048068] RTC time: 11:26:18, date: 08/11/17
[    0.048322] NET: Registered protocol family 16
[    0.050038] cpuidle: using governor ladder
[    0.050053] cpuidle: using governor menu
[    0.050056] PCCT header not found.
[    0.050104] ACPI: bus type PCI registered
[    0.050107] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.050603] PCI: Fatal: No config space access function found
[    0.053446] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.066857] ACPI: Added _OSI(Module Device)
[    0.066859] ACPI: Added _OSI(Processor Device)
[    0.066860] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.066862] ACPI: Added _OSI(Processor Aggregator Device)
[    0.068324] ACPI: Executed 1 blocks of module-level executable AML code
[    0.070479] ACPI: Interpreter enabled
[    0.070506] ACPI: (supports S0 S5)
[    0.070508] ACPI: Using IOAPIC for interrupt routing
[    0.070539] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.076526] ACPI: Enabled 1 GPEs in block 00 to 0F
[    0.076666] vgaarb: loaded
[    0.076722] EDAC MC: Ver: 3.0.0
[    0.080028] Registered efivars operations
[    0.083359] PCI: Using ACPI for IRQ routing
[    0.083361] PCI: System does not support PCI
[    0.083585] NetLabel: Initializing
[    0.083586] NetLabel:  domain hash size = 128
[    0.083587] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.083615] NetLabel:  unlabeled traffic allowed by default
[    0.086745] clocksource: Switched to clocksource hyperv_clocksource_tsc_page
[    0.104590] VFS: Disk quotas dquot_6.6.0
[    0.104672] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.104861] pnp: PnP ACPI init
[    0.105005] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.105010] pnp: PnP ACPI: found 1 devices
[    0.111305] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.111310] intel_mid_msgbus_init: Error: msgbus PCI handle NULL
[    0.111431] NET: Registered protocol family 2
[    0.111950] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.112070] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.112194] TCP: Hash tables configured (established 32768 bind 32768)
[    0.112473] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.112507] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.112881] NET: Registered protocol family 1
[    0.112889] PCI: CLS 0 bytes, default 64
[    0.112972] Unpacking initramfs...
[    0.292912] Freeing initrd memory: 6100K
[    0.292919] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.292924] software IO TLB [mem 0xeec00000-0xf2c00000] (64MB) mapped at [ffff89886ec00000-ffff898872bfffff]
[    0.293085] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21d585ee0d5, max_idle_ns: 440795238333 ns
[    0.293153] Scanning for low memory corruption every 60 seconds
[    0.294747] Initialise system trusted keyrings
[    0.294762] Key type blacklist registered
[    0.294852] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[    0.296682] zbud: loaded
[    0.302222] Key type asymmetric registered
[    0.302241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.305659] io scheduler noop registered
[    0.305661] io scheduler deadline registered
[    0.305736] io scheduler cfq registered (default)
[    0.305738] io scheduler mq-deadline registered
[    0.305739] io scheduler kyber registered
[    0.305791] io scheduler bfq registered
[    0.305892] efifb: probing for efifb
[    0.305909] efifb: framebuffer at 0xf8000000, using 3072k, total 3072k
[    0.305911] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.305912] efifb: scrolling: redraw
[    0.305914] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.309882] Console: switching to colour frame buffer device 128x48
[    0.312677] fb0: EFI VGA frame buffer device
[    0.312691] intel_idle: does not run on family 6 model 63
[    0.312790] GHES: HEST is not enabled!
[    0.312885] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.313343] Linux agpgart interface v0.103
[    0.313720] rtc_cmos 00:00: RTC can wake from S4
[    0.315261] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    0.316051] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
[    0.316148] ledtrig-cpu: registered to indicate activity on CPUs
[    0.316682] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    0.317027] NET: Registered protocol family 10
[    0.325245] Segment Routing with IPv6
[    0.325273] NET: Registered protocol family 17
[    0.325493] RAS: Correctable Errors collector initialized.
[    0.325682] registered taskstats version 1
[    0.325700] Loading compiled-in X.509 certificates
[    0.325721] zswap: loaded using pool lzo/zbud
[    0.326130]   Magic number: 13:378:428
[    0.326671] rtc_cmos 00:00: setting system clock to 2017-08-11 11:26:19 UTC (1502450779)
[    0.327806] PM: Hibernation image not present or could not be loaded.
[    0.330040] Freeing unused kernel memory: 1324K
[    0.330040] Write protecting the kernel read-only data: 10240k
[    0.331007] Freeing unused kernel memory: 1640K
[    0.458809] hv_vmbus: Vmbus version:3.0
[    0.507498] hv_vmbus: registering driver hyperv_keyboard
[    0.509110] hidraw: raw HID events driver (C) Jiri Kosina
[    0.509424] hv_vmbus: registering driver hid_hyperv
[    0.513950] input: Microsoft Vmbus HID-compliant Mouse as /devices/0006:045E:0621.0001/input/input0
[    0.513960] hid 0006:045E:0621.0001: input: <UNKNOWN> HID v0.01 Mouse [Microsoft Vmbus HID-compliant Mouse] on
[    0.514816] SCSI subsystem initialized
[    0.515887] hv_vmbus: registering driver hv_storvsc
[    0.516963] input: AT Translated Set 2 keyboard as /devices/LNXSYSTM:00/LNXSYBUS:00/ACPI0004:00/VMBUS:00/d34b2567-b9b6-42b9-8778-0a4ec0b955bf/serio0/input/input1
[    0.527142] scsi host0: storvsc_host_t
[    0.531587] scsi 0:0:0:0: Direct-Access     Msft     Virtual Disk     1.0  PQ: 0 ANSI: 4
[    0.544067] scsi 0:0:0:1: CD-ROM            Msft     Virtual DVD-ROM  1.0  PQ: 0 ANSI: 0
[    0.629250] sr 0:0:0:1: [sr0] scsi-1 drive
[    0.629253] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.629726] sr 0:0:0:1: Attached scsi CD-ROM sr0
[    0.635722] sd 0:0:0:0: [sda] 4194304000 512-byte logical blocks: (2.15 TB/1.95 TiB)
[    0.635725] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.636968] sd 0:0:0:0: [sda] Write Protect is off
[    0.636972] sd 0:0:0:0: [sda] Mode Sense: 0f 00 00 00
[    0.637081] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.654077]  sda: sda1 sda2 sda3 sda4
[    0.656499] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.676738] random: fast init done
[    0.953947] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    1.124708] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.129624] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    1.129715] systemd[1]: Detected virtualization microsoft.
[    1.129721] systemd[1]: Detected architecture x86-64.
[    1.130636] systemd[1]: Set hostname to <AL-Pasha>.
[    1.318714] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.321232] systemd[1]: Listening on Process Core Dump Socket.
[    1.321485] systemd[1]: Reached target Login Prompts.
[    1.321658] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.321883] systemd[1]: Reached target Remote File Systems.
[    1.322024] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.504655] systemd-journald[182]: Received request to flush runtime journal from PID 1
[    1.656175] systemd-journald[182]: File /var/log/journal/6a410b79eaee4caebdb4739d7e95d45f/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    1.750006] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 10737418240 ms ovfl timer
[    1.750009] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules
[    1.750010] RAPL PMU: hw unit of domain package 2^-0 Joules
[    1.750011] RAPL PMU: hw unit of domain dram 2^-0 Joules
[    1.750011] RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules
[    1.789160] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    1.791369] mousedev: PS/2 mouse device common for all mice
[    1.828402] AVX2 version of gcm_enc/dec engaged.
[    1.828404] AES CTR mode by8 optimization enabled
[    1.858806] hv_vmbus: registering driver hv_netvsc
[    1.862698] hv_vmbus: registering driver hv_balloon
[    1.864191] hv_vmbus: registering driver hyperv_fb
[    1.865765] pps_core: LinuxPPS API ver. 1 registered
[    1.865767] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.867761] PTP clock support registered
[    1.875951] hv_utils: Registering HyperV Utility Driver
[    1.875953] hv_vmbus: registering driver hv_util
[    1.960705] EDAC sbridge: Seeking for: PCI ID 8086:2fa0
[    1.960709] EDAC sbridge:  Ver: 1.1.1
[    1.970012] hv_balloon: Using Dynamic Memory protocol version 1.0
[    1.974596] checking generic (f8000000 300000) vs hw (f8000000 300000)
[    1.974598] fb: switching to hyperv_fb from EFI VGA
[    1.974635] Console: switching to colour dummy device 80x25
[    1.974754] hyperv_fb: Screen resolution: 1152x864, Color depth: 32
[    1.975545] Console: switching to colour frame buffer device 144x54
[    2.009153] hv_utils: FCopy IC version 1.1
[    2.009266] hv_utils: Heartbeat IC version 3.0
[    2.011632] hv_utils: Shutdown IC version 3.0
[    2.011968] hv_utils: TimeSync IC version 3.0
[    2.014595] hv_utils: VSS IC version 5.0
[    2.117383] Adding 4194300k swap on /dev/sda2.  Priority:-1 extents:1 across:4194300k FS
[    2.451481] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    2.944869] random: crng init done
[    3.290564] sddm[285]: segfault at 700 ip 0000000000000700 sp 00007ffe545ce078 error 14 in sddm[400000+72000]
[    3.898816] sddm[340]: segfault at 1fb8170 ip 0000000001fb8170 sp 00007ffce9536458 error 15
[    4.505446] sddm[358]: segfault at 17ede60 ip 00000000017ede60 sp 00007ffcb2bc2668 error 15
[    5.092461] sddm[376]: segfault at 2a74656b63 ip 0000002a74656b63 sp 00007ffd766cd3b8 error 14
[    5.899164] sddm[393]: segfault at 30 ip 0000000000000030 sp 00007ffeeeaf67e8 error 14 in sddm[400000+72000]
[   49.590145] hv_balloon: INFO_TYPE_MAX_PAGE_CNT = 268435456
[   57.653493] hv_utils: KVP IC version 4.0
[   94.260495] hv_balloon: Balloon request will be partially fulfilled. Balloon floor reached.
[   94.263874] hv_balloon: Balloon request will be partially fulfilled. Balloon floor reached.

Иксы я уже установил (как понял, установка должна была сама понять, какая у меня видюха или поставить стандартный драйвер), но при загрузке экран несколько раз мерцает и на этом замирает всё. Последняя запись Reached target Graphical Interface.

median	# 7 лет, 9 месяцев назад
Темы: 4 Сообщения: 140 Участник с: 17 августа 2016	100500 тема, лень искать по форуму, лучше создам еще одну тему

Morisson	# 7 лет, 9 месяцев назад
Темы: 18 Сообщения: 1449 Участник с: 11 января 2017	pavelkq, xf86-video-vesa тебе нужно

redix	# 7 лет, 9 месяцев назад
Темы: 34 Сообщения: 3432 Участник с: 11 марта 2013	Переименуйте топик, что за "оп"? In Tux We Trust

pavelkq	# 7 лет, 9 месяцев назад
Темы: 7 Сообщения: 31 Участник с: 11 августа 2017	Median, честно искал и не только на этом форуме. Очевидно, как для новичка, не мог правильно запрос составить. Morisson, у меня и стоит xf86-video-vesa. В /var/log/Xorg.0.log следующее: [ 6.068] (--) Log file renamed from "/var/log/Xorg.pid-417.log" to "/var/log/Xorg.0.log" [ 6.069] X.Org X Server 1.19.3 Release Date: 2017-03-15 [ 6.069] X Protocol Version 11, Revision 0 [ 6.069] Build Operating System: Linux 4.9.11-1-ARCH x86_64 [ 6.069] Current Operating System: Linux AL-Pasha 4.12.4-1-ARCH #1 SMP PREEMPT Fri Jul 28 18:54:18 UTC 2017 x86_64 [ 6.069] Kernel command line: root=/dev/sda3 rw resum=/dev/sda2 initrd=/initramfs-linux.img [ 6.069] Build Date: 07 April 2017 05:42:48PM [ 6.069] [ 6.069] Current version of pixman: 0.34.0 [ 6.069] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 6.069] Markers: (--) probed, () from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 6.069] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 11 14:02:30 2017 [ 6.069] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 6.070] (==) No Layout section. Using the first Screen section. [ 6.070] (==) No screen section available. Using defaults. [ 6.070] () \|-->Screen "Default Screen Section" (0) [ 6.070] (**) \| \|-->Monitor "<default monitor>" [ 6.070] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 6.070] (==) Automatically adding devices [ 6.070] (==) Automatically enabling devices [ 6.070] (==) Automatically adding GPU devices [ 6.070] (==) Automatically binding GPU devices [ 6.070] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 6.070] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 6.070] Entry deleted from font path. [ 6.070] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 6.070] (==) ModulePath set to "/usr/lib/xorg/modules" [ 6.070] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 6.070] (II) Loader magic: 0x822d60 [ 6.070] (II) Module ABI versions: [ 6.070] X.Org ANSI C Emulation: 0.4 [ 6.070] X.Org Video Driver: 23.0 [ 6.070] X.Org XInput driver : 24.1 [ 6.070] X.Org Server Extension : 10.0 [ 6.071] (++) using VT number 1 [ 6.071] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 6.071] (II) no primary bus or device found [ 6.071] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 6.071] (II) LoadModule: "glx" [ 6.072] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 6.073] (II) Module glx: vendor="X.Org Foundation" [ 6.073] compiled for 1.19.3, module version = 1.0.0 [ 6.073] ABI class: X.Org Server Extension, version 10.0 [ 6.073] (==) Matched modesetting as autoconfigured driver 0 [ 6.073] (==) Matched fbdev as autoconfigured driver 1 [ 6.073] (==) Matched vesa as autoconfigured driver 2 [ 6.073] (==) Assigned the driver to the xf86ConfigLayout [ 6.073] (II) LoadModule: "modesetting" [ 6.073] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 6.073] (II) Module modesetting: vendor="X.Org Foundation" [ 6.073] compiled for 1.19.3, module version = 1.19.3 [ 6.073] Module class: X.Org Video Driver [ 6.073] ABI class: X.Org Video Driver, version 23.0 [ 6.073] (II) LoadModule: "fbdev" [ 6.074] (WW) Warning, couldn't open module fbdev [ 6.074] (II) UnloadModule: "fbdev" [ 6.074] (II) Unloading fbdev [ 6.074] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 6.074] (II) LoadModule: "vesa" [ 6.074] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 6.074] (II) Module vesa: vendor="X.Org Foundation" [ 6.074] compiled for 1.19.0, module version = 2.3.4 [ 6.074] Module class: X.Org Video Driver [ 6.074] ABI class: X.Org Video Driver, version 23.0 [ 6.074] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 6.074] (II) VESA: driver for VESA chipsets: vesa [ 6.074] (WW) Falling back to old probe method for modesetting [ 6.074] (EE) open /dev/dri/card0: No such file or directory [ 6.074] (WW) Falling back to old probe method for vesa [ 6.074] (WW) Falling back to old probe method for modesetting [ 6.074] (EE) open /dev/dri/card0: No such file or directory [ 6.074] (WW) Falling back to old probe method for vesa [ 6.074] (EE) No devices detected. [ 6.074] (EE) Fatal server error: [ 6.074] (EE) no screens found(EE) [ 6.074] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 6.074] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 6.074] (EE) [ 6.078] (EE) Server terminated with error (1). Closing log file. По-моему vesa не работает. Еще непонятно, почему lspci ничего не выдаёт?

pavelkq

# 7 лет, 9 месяцев назад

Темы: 7

Сообщения: 31

Участник с: 11 августа 2017

Median, честно искал и не только на этом форуме. Очевидно, как для новичка, не мог правильно запрос составить.
Morisson, у меня и стоит xf86-video-vesa. В /var/log/Xorg.0.log следующее:


[     6.068] (--) Log file renamed from "/var/log/Xorg.pid-417.log" to "/var/log/Xorg.0.log"
[     6.069]
X.Org X Server 1.19.3
Release Date: 2017-03-15
[     6.069] X Protocol Version 11, Revision 0
[     6.069] Build Operating System: Linux 4.9.11-1-ARCH x86_64
[     6.069] Current Operating System: Linux AL-Pasha 4.12.4-1-ARCH #1 SMP PREEMPT Fri Jul 28 18:54:18 UTC 2017 x86_64
[     6.069] Kernel command line: root=/dev/sda3 rw resum=/dev/sda2 initrd=/initramfs-linux.img
[     6.069] Build Date: 07 April 2017  05:42:48PM
[     6.069]
[     6.069] Current version of pixman: 0.34.0
[     6.069]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[     6.069] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.069] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 11 14:02:30 2017
[     6.069] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.070] (==) No Layout section.  Using the first Screen section.
[     6.070] (==) No screen section available. Using defaults.
[     6.070] (**) |-->Screen "Default Screen Section" (0)
[     6.070] (**) |   |-->Monitor "<default monitor>"
[     6.070] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[     6.070] (==) Automatically adding devices
[     6.070] (==) Automatically enabling devices
[     6.070] (==) Automatically adding GPU devices
[     6.070] (==) Automatically binding GPU devices
[     6.070] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.070] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[     6.070]    Entry deleted from font path.
[     6.070] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/,
        /usr/share/fonts/OTF/,
        /usr/share/fonts/100dpi/,
        /usr/share/fonts/75dpi/
[     6.070] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.070] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.070] (II) Loader magic: 0x822d60
[     6.070] (II) Module ABI versions:
[     6.070]    X.Org ANSI C Emulation: 0.4
[     6.070]    X.Org Video Driver: 23.0
[     6.070]    X.Org XInput driver : 24.1
[     6.070]    X.Org Server Extension : 10.0
[     6.071] (++) using VT number 1

[     6.071] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.071] (II) no primary bus or device found
[     6.071] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     6.071] (II) LoadModule: "glx"
[     6.072] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.073] (II) Module glx: vendor="X.Org Foundation"
[     6.073]    compiled for 1.19.3, module version = 1.0.0
[     6.073]    ABI class: X.Org Server Extension, version 10.0
[     6.073] (==) Matched modesetting as autoconfigured driver 0
[     6.073] (==) Matched fbdev as autoconfigured driver 1
[     6.073] (==) Matched vesa as autoconfigured driver 2
[     6.073] (==) Assigned the driver to the xf86ConfigLayout
[     6.073] (II) LoadModule: "modesetting"
[     6.073] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     6.073] (II) Module modesetting: vendor="X.Org Foundation"
[     6.073]    compiled for 1.19.3, module version = 1.19.3
[     6.073]    Module class: X.Org Video Driver
[     6.073]    ABI class: X.Org Video Driver, version 23.0
[     6.073] (II) LoadModule: "fbdev"
[     6.074] (WW) Warning, couldn't open module fbdev
[     6.074] (II) UnloadModule: "fbdev"
[     6.074] (II) Unloading fbdev
[     6.074] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     6.074] (II) LoadModule: "vesa"
[     6.074] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     6.074] (II) Module vesa: vendor="X.Org Foundation"
[     6.074]    compiled for 1.19.0, module version = 2.3.4
[     6.074]    Module class: X.Org Video Driver
[     6.074]    ABI class: X.Org Video Driver, version 23.0
[     6.074] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     6.074] (II) VESA: driver for VESA chipsets: vesa
[     6.074] (WW) Falling back to old probe method for modesetting
[     6.074] (EE) open /dev/dri/card0: No such file or directory
[     6.074] (WW) Falling back to old probe method for vesa
[     6.074] (WW) Falling back to old probe method for modesetting
[     6.074] (EE) open /dev/dri/card0: No such file or directory
[     6.074] (WW) Falling back to old probe method for vesa
[     6.074] (EE) No devices detected.
[     6.074] (EE)
Fatal server error:
[     6.074] (EE) no screens found(EE)
[     6.074] (EE)
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
[     6.074] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[     6.074] (EE)
[     6.078] (EE) Server terminated with error (1). Closing log file.

По-моему vesa не работает.
Еще непонятно, почему lspci ничего не выдаёт?

Morisson	# 7 лет, 9 месяцев назад
Темы: 18 Сообщения: 1449 Участник с: 11 января 2017	в initramfs MODULES="i915" или чего-нибудь в этом духе нет?

Morisson	# 7 лет, 9 месяцев назад
Темы: 18 Сообщения: 1449 Участник с: 11 января 2017	`resum=/dev/sda2` тут ошибка вкралась resume=...

nafanja	# 7 лет, 9 месяцев назад (отредактировано 7 лет, 9 месяцев назад)
Темы: 94 Сообщения: 9252 Участник с: 02 июня 2012 заблокирован	Morisson в initramfs MODULES="i915" или чего-нибудь в этом духе нет? ~~не обязательно~~ не нужно включать модули видео в initramfs, автоматика и без этого загрузит то что нужно. (есть исключения, но не в данном случае) Псевдографический инсталлятор Arch Linux ver. 3.8.2 Благодарности принимаются на ЯД 410012815723874

nafanja

# 7 лет, 9 месяцев назад (отредактировано 7 лет, 9 месяцев назад)

Темы: 94

Сообщения: 9252

Участник с: 02 июня 2012

заблокирован

Morisson
в initramfs MODULES="i915" или чего-нибудь в этом духе нет?

~~не обязательно~~ не нужно включать модули видео в initramfs, автоматика и без этого загрузит то что нужно. (есть исключения, но не в данном случае)

Псевдографический инсталлятор Arch Linux ver. 3.8.2
Благодарности принимаются на ЯД 410012815723874

pavelkq	# 7 лет, 9 месяцев назад
Темы: 7 Сообщения: 31 Участник с: 11 августа 2017	В файле /etc/mkinitcpio.conf MODULES="". Да, в загрузчике ошибку исправил. Правда, ничего не изменилось (судя по всему swap пока не нужен был - выделил на виртуалке 4Гб памяти). Куда ещё копать? А вообще lspci должен хоть что-то показывать на виртуалках?

pavelkq

# 7 лет, 9 месяцев назад

Темы: 7

Сообщения: 31

Участник с: 11 августа 2017

В файле /etc/mkinitcpio.conf MODULES="". Да, в загрузчике ошибку исправил. Правда, ничего не изменилось (судя по всему swap пока не нужен был - выделил на виртуалке 4Гб памяти). Куда ещё копать? А вообще lspci должен хоть что-то показывать на виртуалках?

Morisson	# 7 лет, 9 месяцев назад
Темы: 18 Сообщения: 1449 Участник с: 11 января 2017	nafanja, я и пишу, что в случае виртуалки это вообще не нужно, если насильно модуль загрузить- ничего не взлетит