jmunb |
|
Темы:
2
Сообщения:
4
Участник с: 28 ноября 2012
|
Доброго времени суток. Некоторое время назад перебрался с Ubuntu на Arch linux на домашней машине, использовал дам SliM как менеджер входа в систему. При установке на ноутбук поставил xfce4 и решил использовать Lightdm для входа. Значит ставлю из репозитория lightdm: pacman -S lightdm pacman -S lightdm-gtk3-greeter Все заводится и прекрастно работает. Но душа просит красивостей и я стявлю lightdm-webkit-greeter из AUR. открываю /etc/lightdm/lightdm.conf и в секции [SeatDefaults] пишу greeter-session=lightdm-webkit-greeter. Сохраняюсь, перезагружаюсь. Появляется окно входа, но вместо всех картинок крестики(как бывает в браузере когда картинка не найдена) а при вводе пароля экран моргает пару раз и опять открывается менеджер входа. Что делать? Есть у кого мысли? Вот файл lightdm.conf: # # General configuration # # start-default-seat = True to always start one seat if none are defined in the configuration # greeter-user = User to run greeter as # minimum-display-number = Minimum display number to use for X servers # minimum-vt = First VT to run displays on # lock-memory = True to prevent memory from being paged to disk # user-authority-in-system-dir = True if session authority should be in the system location # guest-account-script = Script to be run to setup guest account # log-directory = Directory to log information to # run-directory = Directory to put running state in # cache-directory = Directory to cache to # xsessions-directory = Directory to find X sessions # remote-sessions-directory = Directory to find remote sessions # xgreeters-directory = Directory to find X greeters # [LightDM] #start-default-seat=true #greeter-user=lightdm #minimum-display-number=0 #minimum-vt=7 #lock-memory=true #user-authority-in-system-dir=false #guest-account-script=guest-account #log-directory=/var/log/lightdm run-directory=/run/lightdm #cache-directory=/var/cache/lightdm #xsessions-directory=/usr/share/xsessions #remote-sessions-directory=/usr/share/lightdm/remote-sessions #xgreeters-directory=/usr/share/xgreeters # # Seat defaults # # type = Seat type (xlocal, xremote) # xserver-command = X server command to run (can also contain arguments e.g. X -special-option) # xserver-layout = Layout to pass to X server # xserver-config = Config file to pass to X server # xserver-allow-tcp = True if TCP/IP connections are allowed to this X server # xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true) # xdmcp-port = XDMCP UDP/IP port to communicate on # xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf) # greeter-session = Session to load for greeter # greeter-hide-users = True to hide the user list # greeter-allow-guest = True if the greeter should show a guest login option # greeter-show-manual-login = True if the greeter should offer a manual login option # greeter-show-remote-login = True if the greeter should offer a remote login option # user-session = Session to load for users # allow-guest = True if guest login is allowed # guest-session = Session to load for guests (overrides user-session) # session-wrapper = Wrapper script to run session with # display-setup-script = Script to run when starting a greeter session (runs as root) # greeter-setup-script = Script to run when starting a greeter (runs as root) # session-setup-script = Script to run when starting a user session (runs as root) # session-cleanup-script = Script to run when quitting a user session (runs as root) # autologin-guest = True to log in as guest by default # autologin-user = User to log in with by default (overrides autologin-guest) # autologin-user-timeout = Number of seconds to wait before loading default user # autologin-session = Session to load for automatic login (overrides user-session) # exit-on-failure = True if the daemon should exit if this seat fails # [SeatDefaults] #type=xlocal #xserver-command=X #xserver-layout= #xserver-config= #xserver-allow-tcp=false #xdmcp-manager= #xdmcp-port=177 #xdmcp-key= greeter-session=lightdm-webkit-greeter #greeter-hide-users=false #greeter-allow-guest=true #greeter-show-manual-login=false #greeter-show-remote-login=true #user-session=default allow-guest=false #guest-session=UNIMPLEMENTED session-wrapper=/etc/lightdm/xsession #display-setup-script= #greeter-setup-script= #session-setup-script= #session-cleanup-script= #autologin-guest=false #autologin-user= #autologin-user-timeout=0 #autologin-session=UNIMPLEMENTED pam-service=lightdm-autologin #exit-on-failure=false # # Seat configuration # # Each seat must start with "Seat:". # Uses settings from [SeatDefaults], any of these can be overriden by setting them in this section. # #[Seat:0] # # XDMCP Server configuration # # enabled = True if XDMCP connections should be allowed # port = UDP/IP port to listen for connections on # key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf) # # The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn. Alternatively # it can be a word and the first 7 characters are used as the key. # [XDMCPServer] #enabled=false #port=177 #key= # # VNC Server configuration # # enabled = True if VNC connections should be allowed # command = Command to run Xvnc server with # port = TCP/IP port to listen for connections on # width = Width of display to use # height = Height of display to use # depth = Color depth of display to use # [VNCServer] #enabled=false #enabled=false #port=177 #key= # # VNC Server configuration # # enabled = True if VNC connections should be allowed # command = Command to run Xvnc server with # port = TCP/IP port to listen for connections on # width = Width of display to use # height = Height of display to use # depth = Color depth of display to use # [VNCServer] #enabled=false #command=Xvnc #port=5900 #width=1024 #height=768 #depth=8 # # background = Background file to use, either an image path or a color (e.g. #772953) # theme-name = GTK+ theme to use # font-name = Font to use # webkit-theme = Webkit theme to use # xft-antialias = Whether to antialias Xft fonts (true or false) # xft-dpi = Resolution for Xft in dots per inch (e.g. 96) # xft-hintstyle = What degree of hinting to use (hintnone, hintslight, hintmedium, or hintfull) # xft-rgba = Type of subpixel antialiasing (none, rgb, bgr, vrgb or vbgr) # [greeter] #background= #theme-name= webkit-theme=webkit #font-name= #xft-antialias= #xft-dpi= #xft-hintstyle= #xft-rgba= Так же хотел поставить lightdm-pantheon-greeter уж больно он красивый, но там проблемы при установке с granite-bzr да и в AUR пакет помечен как устаревший. |