не могу обновить систему!

h4tr3d
слушай, проблемы с сетью. читай мои посты - ЧТО нужно что бы определить ЧТО у тебя с сетью. информации - ноль.
У него еще current идет
Последний крик моды - эхо 30-летней давности.
tchgefest
h4tr3d
слушай, проблемы с сетью. читай мои посты - ЧТО нужно что бы определить ЧТО у тебя с сетью. информации - ноль.
У него еще current идет

уже увидел.
systemd должен умереть.
проблем с сетью ни каких нет,
 ping repo.archlinux.fr
PING repo.archlinux.fr (213.186.62.207) 56(84) bytes of data.
64 bytes from mir.archlinux.fr (213.186.62.207): icmp_seq=1 ttl=48 time=69.4 ms
64 bytes from mir.archlinux.fr (213.186.62.207): icmp_seq=2 ttl=48 time=69.4 ms
64 bytes from mir.archlinux.fr (213.186.62.207): icmp_seq=3 ttl=48 time=69.2 ms
--- repo.archlinux.fr ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4000ms
rtt min/avg/max/mdev = 69.269/69.365/69.489/0.304 ms

и
:# ping ftp.archlinux.org
PING ftp.archlinux.org (209.85.41.144) 56(84) bytes of data.
64 bytes from dion.freedback.com (209.85.41.144): icmp_seq=1 ttl=47 time=180 ms
64 bytes from dion.freedback.com (209.85.41.144): icmp_seq=2 ttl=47 time=187 ms
64 bytes from dion.freedback.com (209.85.41.144): icmp_seq=3 ttl=47 time=180 ms
--- ftp.archlinux.org ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 7547ms
rtt min/avg/max/mdev = 180.751/182.174/187.499/2.704 ms
перевел, но ни о чем мне это не говорит
     #pacman -Syu
    :: Синхронизирую пакеты базы данных...
    соединяюсь: время соединения вышло
    ошибка: не могу соединиться с ftp.archlinux.org
    ошибка: anonymous неправильный логин
    :: текущее до даты
    распаковываю                    [#########################################################################] 100%     384K    44.0K/s  00:00:08
    :: заменить mktemp с coreutils из "текущего"? [Y/n] y
    :: заменить iproute с iproute2 из "текущего"? [Y/n] y
    :: заменить man с man-db из "текущего"? [Y/n] y
    :: заменить raidtools с mdadm из "текущего"? [Y/n] y
    :: заменить mkinitrd с mkinitcpio из "текущего"? [Y/n] y
    :: заменить slocate с mlocate из "текущего"? [Y/n] y
    :: заменить util-linux с util-linux-ng из "текущего"? [Y/n] y
    :: Pacman обнаружила новую версию "Pacman" пакета.
     :: Мы рекомендуем вам разрешить Pacman обновить себя
     :: Во-первых, вы можете вновь запустить в работу новую версию
    ::
    :: обновить pacman впервые? [Y/n] y
    ошибка: неразрешаемые зависимости:
      pacman: запрашивает libarchive>=2.6.0 но это не синхронизируется с db
      pacman: запрашивает libdownload>=1.3 но это не синхронизируется с db
      pacman: запрашивает pacman-mirrorlist но это не синхронизируется с db
/etc/pacman.conf:
#
# /etc/pacman.conf
#
# NOTE: If you find a mirror that is geographically close to you, please
#       move it to the top of the server list, so pacman will choose it
#       first.
#
# To re-sort your mirror lists by ping/traceroute results, use the
# /usr/bin/sortmirrors script.  It requires the "netselect" package.
#
# See the pacman manpage for option directives
#
# GENERAL OPTIONS
#
[options]
LogFile     = /var/log/pacman.log
NoUpgrade   = etc/passwd etc/group etc/shadow etc/sudoers
NoUpgrade   = etc/fstab etc/raidtab etc/ld.so.conf
NoUpgrade   = etc/rc.conf etc/rc.local
NoUpgrade   = etc/modprobe.conf etc/modules.conf
NoUpgrade   = etc/lilo.conf boot/grub/menu.lst
HoldPkg     = pacman glibc
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#[testing]
#Server = ftp://ftp.archlinux.org/testing/os/i686
[current]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/current
[extra]
# Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/extra
#[unstable]
# Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/unstable
#[community]
# Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/community
# An example of a custom package repository.  See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
#Server = ftp://ftp.archlinux.org/current/os/i686/
#Server = ftp://ftp.archlinux.org/extra/os/i686/
#Server = ftp://ftp.archlinux.org/$repo/os/i686/
#[archlinuxfr]
Server = http://repo.archlinux.fr/i686

/etc/rc.conf:
class="code">
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="en_US"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Moscow"
KEYMAP="ru1"
CONSOLEFONT="Cyr_a8x16.psfu"
CONSOLEMAP="koi8-r_to_uni"
USECOLOR="yes"
#
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
#
# Modules to load at boot-up (in this order)
#   - prefix a module with a ! to blacklist it
#
# VIA Rhine PCI Fast Ethernet driver
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
#
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
HOSTNAME="test"
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
#   - prefix an entry in INTERFACES with a ! to disable it
#   - no hyphens in your interface names - Bash doesn't like it
#
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
#
lo="lo 127.0.0.1"
eth0="eth0 192.168.33.1 network 255.255.255.0  broadcast 192.168.33.255"
INTERFACES=(lo eth0)
#
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
#   - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.3.3"
ROUTES=(gateway)
#
# Enable these network profiles at boot-up.  These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
#   - set to 'menu' to present a menu during boot-up (dialog package required)
#   - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network-profiles
#
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
#   - prefix a daemon with a ! to disable it
#   - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond !shorewall portsentry sshd named httpd mysqld pure-ftpd !xinetd !ntpd samba)
# End of file
либо все в исходниках скачивать?
система у вас оооочень старая, давно нет репозитария current, его заменил core…
в конфиге пакмана, пропишите вместо
Include = <bla>, жестко какой нить сервер, как Server = http|ftp://<бла бла бла>

все упоминания current замените на core и попробуйте ещё.
systemd должен умереть.
поставил в конфиг /etc/pacman.conf
……………
……………
Include = http://repo.archlinux.fr/i686/
……………
……………
все остальные current - закоментированы
но к сожалению результат тот же….

Девиз Arch - быть проще ;D
uboot
поставил в конфиг /etc/pacman.conf
……………
……………
Include = http://repo.archlinux.fr/i686/
……………
……………
все остальные current - закоментированы
но к сожалению результат тот же….

Девиз Arch - быть проще ;D
Вот мой pacman.conf
[core]
Server=ftp://ftp.archlinux.org/core/os/i686
# Add your preferred servers here, they will be used first
[extra]
Server=ftp://ftp.archlinux.org/extra/os/i686
# Add your preferred servers here, they will be used first
[community]
Server=ftp://ftp.archlinux.org/community/os/i686
# Add your preferred servers here, they will be used first
[archlinuxfr]
Server = http://repo.archlinux.fr/i686
Сделайте pacman -Syu pacman
Последний крик моды - эхо 30-летней давности.
Я извиняюсь конечно…
Но у меня та же проблема с подключением по dhcp.
Все настроено было под ядрышко 2.6.28 (работало идеально),
после обновления до 2.6.29, сеть dhcp при загрузке отказывается подниматься :-[
все как в вики для новичков, могу показать все конфиги, но система практически голая, настройки как там.
Сеть при загрузке то видит, то не видит, но после запуска пингует только местный dns, а тот же google.com никак.
запускаю dhcpcd, говорит уже запущен, убиваю его, запускаю заново, все работает.
Вчера ставил на другой комп, все с нуля, после установки pacman -Sy , обновляет ядро, ставлю nvidia и xorg.
xorg.conf делаю обычно через hwd, так эта гадость говорит, точ X не найдены.
1. как поднимать сеть на новом ядрышке культурно, без костылей и набора dhcpcd вручную?
2. иксы 1.6.2 портачат или я отстал от жизни?
Прошу не ругаться, в виду отсутствия телпатов готов предоставить все конфиги, только скажите какие :'(

P.S.:хотел остаться на 2.6.28 так nvidia требует новое ядрышко.
sawes
запускаю dhcpcd, говорит уже запущен, убиваю его, запускаю заново, все работает.
Надо смотреть логи. Попробуйте остановить (убить) dhcpcd и стартовать его в режиме отладки:
killall dhcpcd
dhcpcd -d eth0
Посмотрите, что dhcpcd написал в логах.

sawes
1. как поднимать сеть на новом ядрышке культурно, без костылей и набора dhcpcd вручную?
Используете файрвол (iptables, ipfw etc.)? Можно посмотреть содержимое /etc/rc.conf?

sawes
2. иксы 1.6.2 портачат или я отстал от жизни?
Нет, это проблема hwd. Попробуйте воспользоваться командой “X -configure” (отлично конфигурирует для Vesa и открытых драйверов) или найдите в интернете готовый xorg.conf для вашего видеодрайвера.
мой rc.conf:
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="ru_RU.utf8"
HARDWARECLOCK="local"
USEDIRECTISA="no"
TIMEZONE="Europe/Moscow"
KEYMAP="ru"
CONSOLEFONT="cyr-sun16.psfu.gz"
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="sawes"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
#   - prefix an entry in INTERFACES with a ! to disable it
#   - no hyphens in your interface names - Bash doesn't like it
# 
# DHCP:     Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
#   - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
 
# Enable these network profiles at boot-up.  These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
#   - set to 'menu' to present a menu during boot-up (dialog package required)
#   - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
#   - prefix a daemon with a ! to disable it
#   - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(syslog-ng network netfs crond)

dhcpcd -d eth0 выводит:
eth0: dhcpcd 4.0.12 starting
eth0: hardware address = 00:1b:fc:a6:cc:07
eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason PREINIT
eth0: broadcasting for a lease
eth0: sending DHCP_DISCOVER with xid 0x3da1a90e, next in 4.38 seconds
eth0: offered 88.201.224.87 from 88.201.224.2
eth0: sending DHCP_REQUEST with xid 0x3da1a90e, next in 3.68 seconds
eth0: acknowledged 88.201.224.87 from 88.201.224.2
eth0: checking 88.201.224.87 is available on attached networks
eth0: sending ARP probe (1 of 3), next in 1.55 seconds
eth0: sending ARP probe (2 of 3), next in 1.33 seconds
eth0: sending ARP probe (3 of 3), next in 2.00 seconds
eth0: leased 88.201.224.87 for 21600 seconds
eth0: adding IP address 88.201.224.87/20
eth0: adding route to 0.0.0.0/0 via 88.201.224.1
eth0: executing `/usr/lib/dhcpcd/dhcpcd-run-hooks', reason BOUND
eth0: forking to background
Никаких фаирволов нет, пробовал привязать iptables, ничего не изменилось, откатил назад.

Попробуйте воспользоваться командой “X -configure” (отлично конфигурирует для Vesa и открытых драйверов) или найдите в интернете готовый xorg.conf для вашего видеодрайвера.
У меня ноутбук, проблем с видеокартой в xorg нет, автоматом не хочет цеплять устройства ввода, прописывание ручками результата не дало (скорее всего руки еще не выпрямились ;D ).
Буду искать готовый, спасибо ;)
устройства ввода через HAL настроены?
systemd должен умереть.
 
Зарегистрироваться или войдите чтобы оставить сообщение.