Отваливается клавиатура при входе в систему

strogos
15 лет, 3 месяца назад
Темы: 29
Сообщения: 114
Участник с: 04 августа 2009
Стоит Arch+GNOME. Есть компиз, но не юзается. С недавних пор появилась такая напасть, когда загружаюсь и вижу экран приветствия гнома клава отваливается. Соответственно я не могу ввести пароль и войти в систему. Технически клава в порядке, в биосе она работает. И самое странное в том, что сделав 2-15 перезагрузок все таки удается поймать так, что бы на приветствии гнома клава работала и так войти в систему. В чем проблема? Как это исправить?

Вот на всякий случай rc.conf:
LOCALE="ru_RU.UTF-8"
HARDWARECLOCK="local"
TIMEZONE="Europe/Kiev"
KEYMAP="ru"
CONSOLEFONT=ter-u16b
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
MODULES=()
USELVM="no"
HOSTNAME="strogos"
eth0="dhcp"
INTERFACES=(eth0)
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
DAEMONS=(syslog-ng hal @network netfs crond alsa gdm)
помогите исправить.
Nebulosa
15 лет, 3 месяца назад
Nebulosa avatar
Темы: 9
Сообщения: 915
Участник с: 05 марта 2009
http://wiki.archlinux.org/index.php/X#Common_problems
strogos
15 лет, 3 месяца назад
Темы: 29
Сообщения: 114
Участник с: 04 августа 2009
сделал воттак:
[viktor@strogos ~]$ sudo pacman -S xf86-input-evdev xf86-input-keyboard
Пароль: 
предупреждение: xf86-input-evdev-2.3.2-1 не устарел -- переустанавливается
предупреждение: xf86-input-keyboard-1.4.0-1 не устарел -- переустанавливается
разрешение зависимостей...
проверка на взаимную несовместимость...
Цели (2): xf86-input-evdev-2.3.2-1  xf86-input-keyboard-1.4.0-1  
Размер загружаемых файлов:   0,00 МБ
Размер устанавливаемых файлов:   0,16 МБ
Приступить к установке? [Y/n] y
проверка целостности пакета...
(2/2) проверка возможных конфликтов файлов          [#####################] 100%
(1/2) обновление xf86-input-evdev                   [#####################] 100%
(2/2) обновление xf86-input-keyboard                [#####################] 100%
[viktor@strogos ~]$
strogos
15 лет, 3 месяца назад
Темы: 29
Сообщения: 114
Участник с: 04 августа 2009
не помогло. вот смотрите лог: http://dpaste.com/160861/ 
[viktor@strogos ~]$ sudo pacman -S wgetpaste && wgetpaste /var/log/Xorg.0.log
Пароль: 
разрешение зависимостей...
проверка на взаимную несовместимость...
Цели (1): wgetpaste-2.14-1  
Размер загружаемых файлов:   0,01 МБ
Размер устанавливаемых файлов:   0,07 МБ
Приступить к установке? [Y/n] y
:: Получение пакетов с community...
 wgetpaste-2.14-1-any       9,0K  101,0K/s 00:00:00 [#####################] 100%
проверка целостности пакета...
(1/1) проверка возможных конфликтов файлов          [#####################] 100%
(1/1) установка wgetpaste                           [#####################] 100%
Дополнительные зависимости для wgetpaste
    xclip: interface to Xclipboard
Your paste can be seen here: http://dpaste.com/160860/
class="code">
/var/log/Xorg.0.log pasted by viktor, 22:37 February 17th
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.4.901 (1.7.5 RC 1)
Release Date: 2010-01-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH x86_64 
Current Operating System: Linux strogos 2.6.32-ARCH #1 SMP PREEMPT Tue Feb 9 15:12:10 CET 2010 x86_64
Kernel command line: root=/dev/disk/by-uuid/83cacbb5-288b-46e1-a20d-bdbcefc8f68e ro
Build Date: 31 January 2010  11:34:27AM
 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 18 05:24:47 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "AllowEmptyInput" "False"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x7c0980
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0421:1458:344c nVidia Corporation G86 [GeForce 8500 GT] rev 161, Mem @ 0xc6000000/16777216, 0xa0000000/536870912, 0xc4000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.4.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Server Extension
(II) NVIDIA GLX Module  190.53  Wed Dec  9 16:27:33 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.4.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.4.901, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.4.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.0
	Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.7.0.901, module version = 1.5.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.7.0.901, module version = 1.4.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) NVIDIA dlloader X Driver  190.53  Wed Dec  9 15:39:50 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.4.901, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
	compiled for 1.7.4.901, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Feb 18 05:24:48 NVIDIA(0): Enabling RENDER acceleration
(II) Feb 18 05:24:48 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Feb 18 05:24:48 NVIDIA(0):     enabled.
(II) Feb 18 05:24:49 NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)
(--) Feb 18 05:24:49 NVIDIA(0): Memory: 524288 kBytes
(--) Feb 18 05:24:49 NVIDIA(0): VideoBIOS: 60.86.34.00.13
(II) Feb 18 05:24:49 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Feb 18 05:24:49 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Feb 18 05:24:49 NVIDIA(0): Connected display device(s) on GeForce 8500 GT at PCI:1:0:0:
(--) Feb 18 05:24:49 NVIDIA(0):     LG W2042 (DFP-0)
(--) Feb 18 05:24:49 NVIDIA(0): LG W2042 (DFP-0): 330.0 MHz maximum pixel clock
(--) Feb 18 05:24:49 NVIDIA(0): LG W2042 (DFP-0): Internal Dual Link TMDS
(II) Feb 18 05:24:49 NVIDIA(0): Assigned Display Device: DFP-0
(==) Feb 18 05:24:49 NVIDIA(0): 
(==) Feb 18 05:24:49 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Feb 18 05:24:49 NVIDIA(0):     will be used as the requested mode.
(==) Feb 18 05:24:49 NVIDIA(0): 
(II) Feb 18 05:24:49 NVIDIA(0): Validated modes:
(II) Feb 18 05:24:49 NVIDIA(0):     "nvidia-auto-select"
(II) Feb 18 05:24:49 NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) Feb 18 05:24:49 NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
(--) Feb 18 05:24:49 NVIDIA(0):     option
(==) Feb 18 05:24:49 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Feb 18 05:24:49 NVIDIA(0): Initialized GPU GART.
(II) Feb 18 05:24:49 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Feb 18 05:24:49 NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) Feb 18 05:24:49 NVIDIA(0):     configuration option may not be set correctly.  When the
(II) Feb 18 05:24:49 NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) Feb 18 05:24:49 NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) Feb 18 05:24:49 NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) Feb 18 05:24:49 NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) Feb 18 05:24:49 NVIDIA(0):     Config Options in the README.
(II) Feb 18 05:24:49 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) Feb 18 05:24:49 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Feb 18 05:24:49 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(==) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "XkbRules" "base"
(**) Keyboard0: XkbRules: "base"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device A4Tech USB Mouse
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) 3rd Button detected: disabling emulate3Button
pztrn
15 лет, 3 месяца назад
Темы: 23
Сообщения: 1436
Участник с: 20 сентября 2009 
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device A4Tech USB Mouse
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) 3rd Button detected: disabling emulate3Button

Какбэ намекает на либо отключение хала, либо на удалении строчки AutoAddDevices
strogos
15 лет, 2 месяца назад
Темы: 29
Сообщения: 114
Участник с: 04 августа 2009
PoZiTPoH
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device A4Tech USB Mouse
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(II) AutoAddDevices is off - not adding device.
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) 3rd Button detected: disabling emulate3Button

Какбэ намекает на либо отключение хала, либо на удалении строчки AutoAddDevices
а откуда эту строку удалять?
 
Зарегистрироваться или войдите чтобы оставить сообщение.

© 2006-2025, Русскоязычное сообщество Arch Linux.
Название и логотип Arch Linux ™ являются признанными торговыми марками.
Linux ® — зарегистрированная торговая марка Linus Torvalds и LMI.