[РЕШЕНО] Не печатает HP_LaserJet_Professional_m1132_MFP
| palpalych |
|
Темы:
89
Сообщения:
1127
Участник с: 09 августа 2011
|
Есть мфу HP_LaserJet_Professional_m1132_MFP, ничего не печает, всё время одно и то-же... Выскакивает сообщение Not connected? ~]$ lsusb Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0489:e00d Foxconn / Hon Hai Broadcom Bluetooth 2.1 Device Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 009: ID 03f0:042a Hewlett-Packard Bus 001 Device 005: ID 04f2:b1c1 Chicony Electronics Co., Ltd Bus 002 Device 003: ID 09da:000a A4 Tech Co., Ltd Optical Mouse Opto 510D Bus 002 Device 006: ID 12d1:1436 Huawei Technologies Co., Ltd. E173 3G Modem (modem-mode) Bus 002 Device 005: ID 8086:1406 Intel Corp. WiMAX Connection 2400m crw-rw----+ 1 root lp 189, 8 окт. 31 12:09 SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="042a", MODE="0660", GROUP="scanner", ENV{libsane_matched}="yes"ATTR{idVendor}=="03f0", ATTR{idProduct}=="042a", MODE:="0660", GROUP:="lp", ENV{libsane_matched}:="yes"~]$ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg". found USB scanner (vendor=0x1c7a [Generic], product=0x0801 [FingerPrinter Reader]) at libusb:001:004 found USB scanner (vendor=0x8086, product=0x1406) at libusb:002:005 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. ~]$ history 401 sudo gedit /etc/udev/rules.d/53-sane.rules 402 sudo sane-find-scanner 403 sudo gedit /etc/udev/rules.d/53-sane.rules 404 sudo gedit /etc/sane.d/hpaio.conf 405 sudo gedit /etc/udev/rules.d/10-usbprinter.rules 406 sudo gedit /etc/rc.conf 407 sudo gedit /etc/modprobe.d/blacklist.conf 408 sudo gedit /etc/modprobe.d/usblp_blacklist.conf 409 dmesg 410 lsusb 411 ls -l /dev/bus/usb/001/005 412 sudo gedit /etc/sane.d/hpaio.conf 413 sudo sane-find-scanner 414 sudo gedit /etc/udev/rules.d/10-usbprinter.rules 415 sudo gedit /etc/udev/rules.d/10-usbprinter.rules 416 sudo gedit /etc/udev/rules.d/53-sane.rules 417 sudo gedit /etc/udev/rules.d/53-sane.rules 418 sudo gedit /etc/udev/rules.d/10-usbprinter.rules 419 sudo sane-find-scanner 420 ls -l /dev/bus/usb/001/007 421 sudo gedit /etc/udev/rules.d/10-usbprinter.rules 422 sudo gedit /etc/udev/rules.d/10-usbprinter.rules 423 sudo gedit /etc/udev/rules.d/10-usbprinter.rules 424 sudo gedit /etc/udev/rules.d/53-sane.rules 425 lsusb 426 ls /dev/usb/ 427 lsusb 428 lsusb 429 lsusb 430 sudo -Ss scan 431 sudo pacman -Ss scan 432 sudo pacman -S simple-scan 433 sudo pacman -Syu 434 yaourt -Syua 435 lsusb 436 sudo gedit /etc/udev/rules.d/53-sane.rules 437 sudo sane-find-scanner 438 sudo gedit /etc/sane.d/hpaio.conf 439 sudo sane-find-scanner 440 sudo rm /etc/modprobe.d/usblp_blacklist.conf 441 sudo rm /etc/modprobe.d/blacklist.conf 442 scanimage -L 443 sudo pacman -S hplip hpoj 444 xsane 445 sudo gedit /etc/udev/rules.d/53-sane.rules 446 groups dbus 447 gpasswd -a dbus lp 448 sudo gpasswd -a dbus lp 449 sudo gpasswd -a dbus scanner 450 hp-check -t 451 hp-check -t 452 sudo hp-plugin 453 hp-check -t 454 hp-check -t 455 sudo hp-setup -i 456 sudo hp-setup -i 457 sudo hp-setup -i 458 sudo hp-setup -i 459 sudo hp-setup -i 460 history 461 hp-check -t 462 sudo gedit /etc/udev/rules.d/53-sane.rules 463 sudo gedit /etc/udev/rules.d/10-usbprinter.rules 464 sudo gedit /etc/udev/rules.d/53-sane.rules 465 lsusb 466 sudo gedit /etc/sane.d/hpaio.conf 467 sudo gedit /etc/modprobe.d/modprobe.conf 468 lsusb 469 sudo hp-setup -i
Арчи ~]$ ...as always want ready-made solutions that would make even tastier
|
| palpalych |
|
|
Темы:
89
Сообщения:
1127
Участник с: 09 августа 2011
|
ну блин почему арчеводы молчат??? ладно как убить все настройки cups???
Арчи ~]$ ...as always want ready-made solutions that would make even tastier
|
| vadik |
|
|
Темы:
57
Сообщения:
5488
Участник с: 17 августа 2009
|
PalPalychГляньте в /etc/cups, там понятно. |
| palpalych |
|
|
Темы:
89
Сообщения:
1127
Участник с: 09 августа 2011
|
Что и требовалось доказать, убил и поставил заново, всё заработало, единственно, что всеравно ругается блин, как бы это не стало причиной очередных неприятностей ~]$ hp-check -t HP Linux Imaging and Printing System (ver. 3.12.10a) Dependency/Version Check Utility ver. 15 Copyright (c) 2001-14 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: Initializing. Please wait... warning: unknown-0.0 version is not supported. Using unknown-0 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 15:13:56 CET 2012 GNU/Linux Host: linux Proc: 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 15:13:56 CET 2012 GNU/Linux Distribution: unknown 0.0 ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.12.10a HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for unknown distro 0.0 version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.12.10a ... <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> -------------------------- | External Dependencies | -------------------------- gs Ghostscript REQUIRED 7.05 9.06 OK - network Network-wget OPTIONAL - 1.14 OK - dbus DBus REQUIRED - 1.6.8 OK - scanimage Shell-Scanning OPTIONAL 1.0 1.0.23 OK - error: policykit Admin-Policy-framework OPTIONAL - 0.107 MISSING 'policykit needs to be installed' error: xsane SANE-GUI OPTIONAL 0.9 - MISSING 'xsane needs to be installed' cups CUPS REQUIRED 1.1 1.6.1 OK 'CUPS Scheduler is running' ------------------------- | General Dependencies | ------------------------- error: reportlab Python-PDF-Lib OPTIONAL 2.0 - MISSING 'reportlab needs to be installed' libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK - pil Python-Image-Lib OPTIONAL - 1.1.7 OK - pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.9.5 OK - libjpeg JPEG-Lib REQUIRED - - OK - libpthread POSIX-Threads-Lib REQUIRED - 2.16 OK - python-dbus Python-DBUS REQUIRED 0.80.0 1.1.1 OK - python-devel Python-SDK REQUIRED 2.2 2.7.3 OK - pyqt4 Python-Qt4 REQUIRED 4.0 4.9.5 OK - cups-devel CUPS-SDK REQUIRED - 1.6.1 OK - sane-devel SANE-SDK REQUIRED - 1.0.23 OK - libusb USB-Lib REQUIRED - 1.0 OK - sane Scan-Lib REQUIRED - 1.0.23 OK - cups-image CUPS-Image-Lib REQUIRED - 1.6.1 OK - libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK - python-xml Python-XML-Lib REQUIRED - 2.1.0 OK - python-notify Desktop-notifications OPTIONAL - - OK - ------------------------------ | Compile Time Dependencies | ------------------------------ gcc gcc-Compiler REQUIRED - 4.7.2 OK - libtool Build-tools REQUIRED - 2.4.2 OK - make GNU-Build-tools REQUIRED 3.0 3.82 OK - ---------------------- | Python Extentions | ---------------------- cupsext CUPS-Extension REQUIRED - 3.12.10a OK - pcardext PhotoCard-Extension REQUIRED - 3.12.10a OK - hpmudext IO-Extension REQUIRED - 3.12.10a OK - ----------------------- | Scan Configuration | ----------------------- hpaio HPLIP-SANE-Backend REQUIRED - 3.12.10a OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.12.10a OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ device `hpaio:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH658QGPR1a' is a Hewlett-Packard HP_LaserJet_Professional_M1132_MFP all-in-one device `v4l:/dev/video0' is a Noname Lenovo EasyCamera virtual device -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model ------------------------------------------------------------------- ---------------------------------- hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH658QGP HP LaserJet Professional M1132 MFP R1a --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- HP_LaserJet_Professional_M1132_MFP ---------------------------------- Type: Printer Device URI: hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH658QGPR1a PPD: /etc/cups/ppd/HP_LaserJet_Professional_M1132_MFP.ppd PPD Description: HP LaserJet Professional m1132 MFP, hpcups 3.12.10a, requires proprietary plugin Printer ready to printr HP_LaserJet_Professional_M1132_MFP is idle. enabled since Пт. 02 нояб. 2012 10:28:26 error: Required plug-in status: Not installed Communication status: Good -------------- | PERMISSION | -------------- groups user-groups Required - - OK sys lp wheel games video audio optical storage scanner power users USB HP_LaserJet_Professional_M1132_MFP Required - - OK Node:'/dev/bus/usb/001/005' Perm:' root lp rw- rw- rw- rw- ---' ----------- | SUMMARY | ----------- Missing Required Dependencies ----------------------------- None Missing Optional Dependencies ----------------------------- None Total Errors: 1 Total Warnings: 0 Re-run 'hp-check --fix' command to prompt and fix the issues. Done. Communication status: Good … Total Errors: 1 Total Warnings: 0 ~]$ hp-check –fix
HP Linux Imaging and Printing System (ver. 3.12.10a)
Dependency/Version Check Utility ver. 15
Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
Saving output in log file: /home/archie/hp-check.log
Initializing. Please wait...
warning: unknown-0.0 version is not supported. Using unknown-0 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 15:13:56 CET 2012 GNU/Linux
Host: linux
Proc: 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 15:13:56 CET 2012 GNU/Linux
Distribution: unknown 0.0
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.12.10a
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro 0.0 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.12.10a
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.12.10a
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.12.10a
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: ???????? ? ???????
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = "hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH658QGPR1a"
printer_name = HP_Color_LaserJet_M1132_MFP
working_dir = .
[installation]
date_time = 02.11.2012 10:38:28
version = 3.12.10a
....
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
gs Ghostscript REQUIRED 7.05 9.06 OK -
network Network-wget OPTIONAL - 1.14 OK -
dbus DBus REQUIRED - 1.6.8 OK -
scanimage Shell-Scanning OPTIONAL 1.0 1.0.23 OK -
error: policykit Admin-Policy-framework OPTIONAL - 0.107 MISSING 'policykit needs to be installed'
error: xsane SANE-GUI OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
cups CUPS REQUIRED 1.1 1.6.1 OK 'CUPS Scheduler is running'
-------------------------
| General Dependencies |
-------------------------
error: reportlab Python-PDF-Lib OPTIONAL 2.0 - MISSING 'reportlab needs to be installed'
libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 OK -
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.9.5 OK -
libjpeg JPEG-Lib REQUIRED - - OK -
libpthread POSIX-Threads-Lib REQUIRED - 2.16 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.1.1 OK -
python-devel Python-SDK REQUIRED 2.2 2.7.3 OK -
pyqt4 Python-Qt4 REQUIRED 4.0 4.9.5 OK -
cups-devel CUPS-SDK REQUIRED - 1.6.1 OK -
sane-devel SANE-SDK REQUIRED - 1.0.23 OK -
libusb USB-Lib REQUIRED - 1.0 OK -
sane Scan-Lib REQUIRED - 1.0.23 OK -
cups-image CUPS-Image-Lib REQUIRED - 1.6.1 OK -
libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.7.2 OK -
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
------------------------------
| Compile Time Dependencies |
------------------------------
gcc gcc-Compiler REQUIRED - 4.7.2 OK -
libtool Build-tools REQUIRED - 2.4.2 OK -
make GNU-Build-tools REQUIRED 3.0 3.82 OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.12.10a OK -
pcardext PhotoCard-Extension REQUIRED - 3.12.10a OK -
hpmudext IO-Extension REQUIRED - 3.12.10a OK -
-----------------------
| Scan Configuration |
-----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.12.10a OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.12.10a OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpaio:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH658QGPR1a' is a Hewlett-Packard HP_LaserJet_Professional_M1132_MFP all-in-one
device `v4l:/dev/video0' is a Noname Lenovo EasyCamera virtual device
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
------------------------------------------------------------------- ----------------------------------
hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH658QGP HP LaserJet Professional M1132 MFP
R1a
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_LaserJet_Professional_M1132_MFP
----------------------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_Professional_M1132_MFP?serial=000000000QH658QGPR1a
PPD: /etc/cups/ppd/HP_LaserJet_Professional_M1132_MFP.ppd
PPD Description: HP LaserJet Professional m1132 MFP, hpcups 3.12.10a, requires proprietary plugin
Printer ready to printr HP_LaserJet_Professional_M1132_MFP is idle. enabled since Пт. 02 нояб. 2012 10:28:26
error: Required plug-in status: Not installed
Communication status: Good
--------------
| PERMISSION |
--------------
groups user-groups Required - - OK sys lp wheel games video audio optical storage scanner power users
USB HP_LaserJet_Professional_M1132_MFP Required - - OK Node:'/dev/bus/usb/001/005' Perm:' root lp rw- rw- rw- rw- ---'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
None
Total Errors: 1
Total Warnings: 0Do you want to install missing/incompatible Plug-in's?(y=yes*, n=no)y ENTER ROOT/SUPERUSER PASSWORD —————————– Please enter the root/superuser password: Password accepted cmd = sudo hp-plugin -i \ И всё зависло…
Арчи ~]$ ...as always want ready-made solutions that would make even tastier
|
| aspiring |
|
|
Темы:
32
Сообщения:
152
Участник с: 12 октября 2011
|
>Есть мфу HP_LaserJet_Professional_m1132_MFP Мои поздравления, тоже постоянно мучаюсь с этим дерьмом от HуеPлета >ладно как убить все настройки cups??? sudo cp /etc/cups/cupsd.conf.default /etc/cups/cupsd.conf особенно полезно с нынешней вебмордой под caps 1.6 после которой капс отказывается запускаться >error: Required plug-in status: Not installed Понимаю были бы хорошие принтеры, но какой смысл закрывать код дерьма? по сети ставить плуг бесполезно, ибо производитель забил на поддержку давно, http://www.openprinting.org/download/pr … P/plugins/ качаем отсюда плугин под версию своего hplip потом начинаются выкрутасы со змеями: rm -rf /usr/bin/python cd /usr/bin ln -s /usr/bin/python2.7 python ставишь сам плуг, напр последний ./hplip-3.12.10a-plugin.run далее идешь в капс и выбираешь тот принтер который под cups и с кучей бесполезных нулей в названии раньше после всего этого мазохизма simple-scan работал сейчас не может сканер найти, но принтер пашет |
| arcanis |
|
Темы:
31
Сообщения:
1496
Участник с: 09 сентября 2012
|
aspiringзря вы так, нормальная вещь имхо. Заработал без доп.костылей и работает бесперебойно |
| aspiring |
|
|
Темы:
32
Сообщения:
152
Участник с: 12 октября 2011
|
ну эта эйфория до первого обновления cups или hplip |
| palpalych |
|
|
Темы:
89
Сообщения:
1127
Участник с: 09 августа 2011
|
афигеть, опять не печатает, без явных признаков, горе принтер… Это происходит после того как выключаешь мфу, потом включаешь и всё - борода, приходится каждый раз переустанавливать…
Арчи ~]$ ...as always want ready-made solutions that would make even tastier
|
| aspiring |
|
|
Темы:
32
Сообщения:
152
Участник с: 12 октября 2011
|
донт паник, заметил одну “особенность” у этого HуеPлёта, хп-тулс показывает что тупо не может найти принтер хотя в лсусб он есть, просто выключи питание агрегата подожди секунт 15 и опять включи. |
| palpalych |
|
|
Темы:
89
Сообщения:
1127
Участник с: 09 августа 2011
|
Может кто-то по логам поймет что происходит Error Log D [21/Nov/2012:10:10:09 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy" D [21/Nov/2012:10:10:09 +0400] [Client 112] Authorized as archie using PeerCred D [21/Nov/2012:10:10:09 +0400] [Client 112] 2.0 Resume-Printer 1 D [21/Nov/2012:10:10:09 +0400] Resume-Printer ipp://localhost/printers/HP_LaserJet_Professional_M1132_MFP D [21/Nov/2012:10:10:09 +0400] cupsdIsAuthorized: username="archie" D [21/Nov/2012:10:10:09 +0400] cupsdMarkDirty(----S) D [21/Nov/2012:10:10:09 +0400] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients" D [21/Nov/2012:10:10:09 +0400] cupsdMarkDirty(P----) D [21/Nov/2012:10:10:09 +0400] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files" D [21/Nov/2012:10:10:09 +0400] cupsdRegisterPrinter(p=0xb91432a8(HP_LaserJet_Professional_M1132_MFP)) D [21/Nov/2012:10:10:09 +0400] cupsdMarkDirty(P----) D [21/Nov/2012:10:10:09 +0400] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files" I [21/Nov/2012:10:10:09 +0400] Printer "HP_LaserJet_Professional_M1132_MFP" started by "archie". D [21/Nov/2012:10:10:09 +0400] Returning IPP successful-ok for Resume-Printer (ipp://localhost/printers/HP_LaserJet_Professional_M1132_MFP) from localhost D [21/Nov/2012:10:10:09 +0400] [Notifier] state=3 D [21/Nov/2012:10:10:09 +0400] [Notifier] PrinterStateChanged D [21/Nov/2012:10:10:09 +0400] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files" D [21/Nov/2012:10:10:09 +0400] [Client 112] HTTP_WAITING Closing on EOF D [21/Nov/2012:10:10:09 +0400] [Client 112] Closing connection. D [21/Nov/2012:10:10:09 +0400] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files" D [21/Nov/2012:10:10:09 +0400] [Client 109] POST / HTTP/1.1 D [21/Nov/2012:10:10:09 +0400] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files" D [21/Nov/2012:10:10:09 +0400] [Client 109] No authentication data provided. D [21/Nov/2012:10:10:09 +0400] [Client 109] 2.0 CUPS-Get-Default 5 D [21/Nov/2012:10:10:09 +0400] CUPS-Get-Default .. D [21/Nov/2012:10:37:32 +0400] [Client 14] GET /admin/log/error_log? HTTP/1.1 D [21/Nov/2012:10:37:32 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy" D [21/Nov/2012:10:37:32 +0400] [Client 14] No authentication data provided. D [21/Nov/2012:10:37:32 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients" D [21/Nov/2012:10:37:32 +0400] [Client 14] GET /favicon.ico HTTP/1.1 D [21/Nov/2012:10:37:32 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy" D [21/Nov/2012:10:37:32 +0400] [Client 14] No authentication data provided. D [21/Nov/2012:10:37:32 +0400] [Client 14] Closing because Keep-Alive disabled D [21/Nov/2012:10:37:32 +0400] [Client 14] Closing connection. D [21/Nov/2012:10:37:32 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients" D [21/Nov/2012:10:37:39 +0400] [Client 15] HTTP_WAITING Closing on EOF D [21/Nov/2012:10:37:39 +0400] [Client 15] Closing connection. D [21/Nov/2012:10:37:39 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy" D [21/Nov/2012:10:37:39 +0400] [Client 16] HTTP_WAITING Closing on EOF D [21/Nov/2012:10:37:39 +0400] [Client 16] Closing connection. D [21/Nov/2012:10:37:39 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy" D [21/Nov/2012:10:37:39 +0400] [Client 17] HTTP_WAITING Closing on EOF D [21/Nov/2012:10:37:39 +0400] [Client 17] Closing connection. D [21/Nov/2012:10:37:39 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy" D [21/Nov/2012:10:38:28 +0400] [Client 14] Accepted from localhost:631 (IPv6) D [21/Nov/2012:10:38:28 +0400] Report: clients=1 D [21/Nov/2012:10:38:28 +0400] Report: jobs=1 D [21/Nov/2012:10:38:28 +0400] Report: jobs-active=0 D [21/Nov/2012:10:38:28 +0400] Report: printers=1 D [21/Nov/2012:10:38:28 +0400] Report: stringpool-string-count=2848 D [21/Nov/2012:10:38:28 +0400] Report: stringpool-alloc-bytes=10784 D [21/Nov/2012:10:38:28 +0400] Report: stringpool-total-bytes=59584 D [21/Nov/2012:10:38:28 +0400] [Client 15] Accepted from localhost:631 (IPv6) D [21/Nov/2012:10:38:28 +0400] [Client 16] Accepted from localhost:631 (IPv6) D [21/Nov/2012:10:38:38 +0400] [Client 14] HTTP_WAITING Closing on EOF D [21/Nov/2012:10:38:38 +0400] [Client 14] Closing connection. D [21/Nov/2012:10:38:38 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy" D [21/Nov/2012:10:38:38 +0400] [Client 15] HTTP_WAITING Closing on EOF D [21/Nov/2012:10:38:38 +0400] [Client 15] Closing connection. D [21/Nov/2012:10:38:38 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy" D [21/Nov/2012:10:38:38 +0400] [Client 16] HTTP_WAITING Closing on EOF D [21/Nov/2012:10:38:38 +0400] [Client 16] Closing connection. D [21/Nov/2012:10:38:38 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Not busy" D [21/Nov/2012:10:41:08 +0400] [Client 14] Accepted from localhost:631 (IPv6) D [21/Nov/2012:10:41:08 +0400] Report: clients=1 D [21/Nov/2012:10:41:08 +0400] Report: jobs=1 D [21/Nov/2012:10:41:08 +0400] Report: jobs-active=0 D [21/Nov/2012:10:41:08 +0400] Report: printers=1 D [21/Nov/2012:10:41:08 +0400] Report: stringpool-string-count=2848 D [21/Nov/2012:10:41:08 +0400] Report: stringpool-alloc-bytes=10784 D [21/Nov/2012:10:41:08 +0400] Report: stringpool-total-bytes=59584 D [21/Nov/2012:10:41:08 +0400] [Client 14] GET /admin/log/access_log? HTTP/1.1 D [21/Nov/2012:10:41:08 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy" D [21/Nov/2012:10:41:08 +0400] [Client 14] No authentication data provided. D [21/Nov/2012:10:41:08 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients" D [21/Nov/2012:10:41:09 +0400] [Client 14] GET /favicon.ico HTTP/1.1 D [21/Nov/2012:10:41:09 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy" D [21/Nov/2012:10:41:09 +0400] [Client 14] No authentication data provided. D [21/Nov/2012:10:41:09 +0400] [Client 14] Closing because Keep-Alive disabled D [21/Nov/2012:10:41:09 +0400] [Client 14] Closing connection. D [21/Nov/2012:10:41:09 +0400] cupsdSetBusyState: newbusy="Not busy", busy="Active clients" D [21/Nov/2012:10:41:45 +0400] [Client 14] Accepted from localhost:631 (IPv6) D [21/Nov/2012:10:41:45 +0400] [Client 15] Accepted from localhost:631 (IPv6) D [21/Nov/2012:10:41:47 +0400] [Client 14] GET /admin/log/error_log? HTTP/1.1 D [21/Nov/2012:10:41:47 +0400] cupsdSetBusyState: newbusy="Active clients", busy="Not busy" D [21/Nov/2012:10:41:47 +0400] [Client 14] No authentication data provided.
Арчи ~]$ ...as always want ready-made solutions that would make even tastier
|