Участник с: 26 октября 2017
|
To RusWolf Linux 4.18.3-arch1-1-ARCH x86_64
To vasek DDR2 800 Этих 4 ссылка на алибабу Эти стояли старые 2 hynix korea 9 1GB PC2-6400U-666-12, HYMP112U64CP8-S6 AB-C все что написано. Вроде они 800 МГц ссылка на ибэй
На самом деле 1Гб планок у меня много, есть самсунги, кингстон и еще пара тройка планок непопулярных фирм, они тоже в связке не работают. Все DDR2 800 МГц dimm.
В общем дело такое, мать я менял и она довольно новая, но как оказалось старого производства. Ссылка на спецификацию А вот че интересно, там красными буквами написано:
* Do not populate both DIMM sockets of the same channel (e.g. DDR and DDR2), or populate 4 DIMM sockets with double-sided memory modules to prevent system's failure to start or incorrect detection of memory modules. Please refer to the user manual for the memory configurations table. Т.е. 4 модуля Dimm не работают одновременно, или только черные чипы памяти должны быть на двух сторонах обязательно. Так или иначе 4 не работают. Раньше тоже не мог его заставить работать 4 1Гб модули, получаются они все dimm, но чипы у 1Гб не у всех на друх сторонах. Конкретно у hynixов только на одной стороне, вот поэтому я их и пытался заставить работать.
Мне хотя бы 3 заставить работать. 3 по 2ГБ. Оказывается в Windows 10, работают только 2x2Гб + 2x1Гб планки, а вот 3x2Гб нет(системная ошибка, перезагрузка). Т.е. все 4 стола рабочие, я это всегда знал, по одному проверял. В linux тоже хоть в любую засовывай по 1 и запускай нормально, хоть 1 ГБ хоть 2 ГБ.
sudo lshw -short -C memory | grep MHz
/0/19/0 memory 2GiB DIMM 800 MHz (1.2 ns)
/0/19/1 memory 1GiB DIMM 800 MHz (1.2 ns)
/0/19/2 memory 2GiB DIMM 800 MHz (1.2 ns)
/0/19/3 memory 1GiB DIMM 800 MHz (1.2 ns)
dmesg
[ 0.000000] Linux version 4.18.3-arch1-1-ARCH (builduser@heftig-24267) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Sat Aug 18 09:22:54 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1ece481f-9aa9-42a1-aa39-5c41a6283373 rw quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7cdffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7ce0000-0x00000000b7ce2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7ce3000-0x00000000b7ceffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7cf0000-0x00000000b7cfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 0F00000000 write-back
[ 0.000000] 1 base 00C0000000 mask 0FC0000000 uncachable
[ 0.000000] 2 base 00B8000000 mask 0FF8000000 uncachable
[ 0.000000] 3 base 00B7E00000 mask 0FFFE00000 uncachable
[ 0.000000] 4 base 0100000000 mask 0FC0000000 write-back
[ 0.000000] 5 base 00B7D00000 mask 0FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] total RAM covered: 3965M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 6 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xb7d00000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xb7ce0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5760-0x000f576f] mapped at [(____ptrval____)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.000000] BRK [0x8b076000, 0x8b076fff] PGTABLE
[ 0.000000] BRK [0x8b077000, 0x8b077fff] PGTABLE
[ 0.000000] BRK [0x8b078000, 0x8b078fff] PGTABLE
[ 0.000000] BRK [0x8b079000, 0x8b079fff] PGTABLE
[ 0.000000] BRK [0x8b07a000, 0x8b07afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3714d000-0x3789dfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7150 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 0x00000000B7CE3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 0x00000000B7CE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 0x00000000B7CE3180 003DE7 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 0x00000000B7CE0000 000040
[ 0.000000] ACPI: HPET 0x00000000B7CE70C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 0x00000000B7CE7140 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: TAMG 0x00000000B7CE7180 006442 (v01 GBT GBT B0 5455312E BG?? 00020101)
[ 0.000000] ACPI: APIC 0x00000000B7CE6FC0 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 0x00000000B7CEDEF0 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffcfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b7cdffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Reserved but unavailable: 898 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 1014910
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11700 pages used for memmap
[ 0.000000] DMA32 zone: 748768 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0xb8000000-0xbfffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7ce0000-0xb7ce2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7ce3000-0xb7ceffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7cf0000-0xb7cfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7d00000-0xb7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb8000000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] [mem 0xd0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999029
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1ece481f-9aa9-42a1-aa39-5c41a6283373 rw quiet
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3898760K/4059640K available (10252K kernel code, 1297K rwdata, 3528K rodata, 1488K init, 612K bss, 160880K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 33392 entries in 131 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: (none).
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x95, should be 0xC6 (20180531/tbprint-177)
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.016666] tsc: Fast TSC calibration using PIT
[ 0.019999] tsc: Detected 2666.151 MHz processor
[ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x266e5651bbd, max_idle_ns: 440795206380 ns
[ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5334.48 BogoMIPS (lpj=8887170)
[ 0.019999] pid_max: default: 32768 minimum: 301
[ 0.019999] Security Framework initialized
[ 0.019999] Yama: becoming mindful.
[ 0.019999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.019999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.019999] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.019999] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.019999] mce: CPU supports 6 MCE banks
[ 0.019999] CPU0: Thermal monitoring enabled (TM2)
[ 0.019999] process: using mwait in idle threads
[ 0.019999] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.019999] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.019999] Spectre V2 : Mitigation: Full generic retpoline
[ 0.019999] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.019999] Speculative Store Bypass: Vulnerable
[ 0.019999] Freeing SMP alternatives memory: 28K
[ 0.029999] smpboot: CPU0: Intel(R) Xeon(R) CPU X5450 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.046680] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.046690] ... version: 2
[ 0.046692] ... bit width: 40
[ 0.046692] ... generic registers: 2
[ 0.046694] ... value mask: 000000ffffffffff
[ 0.046695] ... max period: 000000007fffffff
[ 0.046696] ... fixed-purpose events: 3
[ 0.046697] ... event mask: 0000000700000003
[ 0.053338] Hierarchical SRCU implementation.
[ 0.073502] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.080005] smp: Bringing up secondary CPUs ...
[ 0.120021] x86: Booting SMP configuration:
[ 0.120023] .... node #0, CPUs: #1
[ 0.122894] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.122895] Measured 4195652 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.122896] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.160018] #2 #3
[ 0.200898] smp: Brought up 1 node, 4 CPUs
[ 0.200898] smpboot: Max logical packages: 1
[ 0.200898] smpboot: Total of 4 processors activated (21337.92 BogoMIPS)
[ 0.206890] devtmpfs: initialized
[ 0.206890] x86/mm: Memory block size: 128MB
[ 0.207248] PM: Registering ACPI NVS region [mem 0xb7ce0000-0xb7ce2fff] (12288 bytes)
[ 0.207248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.207248] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.207248] pinctrl core: initialized pinctrl subsystem
[ 0.207248] RTC time: 15:07:57, date: 10/03/18
[ 0.207248] NET: Registered protocol family 16
[ 0.207248] audit: initializing netlink subsys (disabled)
[ 0.207248] audit: type=2000 audit(1538579276.206:1): state=initialized audit_enabled=0 res=1
[ 0.207248] cpuidle: using governor ladder
[ 0.207248] cpuidle: using governor menu
[ 0.207248] ACPI: bus type PCI registered
[ 0.207248] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.207248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 0.207248] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 0.207248] PCI: Using configuration type 1 for base access
[ 0.210050] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.210135] ACPI: Added _OSI(Module Device)
[ 0.210136] ACPI: Added _OSI(Processor Device)
[ 0.210137] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.210138] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.210139] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.213715] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.216335] ACPI: Dynamic OEM Table Load:
[ 0.216342] ACPI: SSDT 0xFFFF9CFC7AA73C00 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.216618] ACPI: Dynamic OEM Table Load:
[ 0.216622] ACPI: SSDT 0xFFFF9CFC7AAF8000 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.216866] ACPI: Dynamic OEM Table Load:
[ 0.216870] ACPI: SSDT 0xFFFF9CFC7AAF9200 000152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.217096] ACPI: Dynamic OEM Table Load:
[ 0.217100] ACPI: SSDT 0xFFFF9CFC7AAF9A00 000152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.217483] ACPI: Interpreter enabled
[ 0.217503] ACPI: (supports S0 S3 S4 S5)
[ 0.217505] ACPI: Using IOAPIC for interrupt routing
[ 0.217530] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.217697] ACPI: Enabled 10 GPEs in block 00 to 1F
[ 0.223056] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.223062] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.223067] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.223374] PCI host bridge to bus 0000:00
[ 0.223376] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.223378] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.223380] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.223381] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.223383] pci_bus 0000:00: root bus resource [mem 0xb7d00000-0xfebfffff window]
[ 0.223385] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.223394] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[ 0.223416] DMAR: Forcing write-buffer flush capability
[ 0.223417] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.223517] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
[ 0.223528] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[ 0.223534] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.223538] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe007]
[ 0.223647] pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000
[ 0.223657] pci 0000:00:02.1: reg 0x10: [mem 0xe1400000-0xe14fffff 64bit]
[ 0.223793] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.223811] pci 0000:00:1b.0: reg 0x10: [mem 0xe1700000-0xe1703fff 64bit]
[ 0.223874] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.223985] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.224052] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.224162] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.224229] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.224340] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.224377] pci 0000:00:1d.0: reg 0x20: [io 0xe100-0xe11f]
[ 0.224489] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.224526] pci 0000:00:1d.1: reg 0x20: [io 0xe200-0xe21f]
[ 0.224638] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.224674] pci 0000:00:1d.2: reg 0x20: [io 0xe300-0xe31f]
[ 0.224787] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.224823] pci 0000:00:1d.3: reg 0x20: [io 0xe400-0xe41f]
[ 0.224939] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.224956] pci 0000:00:1d.7: reg 0x10: [mem 0xe1704000-0xe17043ff]
[ 0.225115] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.225256] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.225331] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.225335] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.225338] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.225341] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.225455] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x010180
[ 0.225469] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.225476] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.225482] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.225488] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.225495] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f]
[ 0.225508] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.225510] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.225511] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.225513] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.225532] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.225628] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.225677] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.225825] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.225883] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.225909] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.225934] pci 0000:02:00.0: reg 0x18: [mem 0xe1510000-0xe1510fff 64bit pref]
[ 0.225950] pci 0000:02:00.0: reg 0x20: [mem 0xe1500000-0xe150ffff 64bit pref]
[ 0.225961] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.226037] pci 0000:02:00.0: supports D1 D2
[ 0.226039] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.226129] pci 0000:00:1c.1: ASPM: current common clock configuration is broken, reconfiguring
[ 0.233357] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.233361] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.233365] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff]
[ 0.233370] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref]
[ 0.233388] pci_bus 0000:03: extended config space not accessible
[ 0.233428] pci 0000:03:07.0: [104c:8024] type 00 class 0x0c0010
[ 0.233445] pci 0000:03:07.0: reg 0x10: [mem 0xe1604000-0xe16047ff]
[ 0.233455] pci 0000:03:07.0: reg 0x14: [mem 0xe1600000-0xe1603fff]
[ 0.233526] pci 0000:03:07.0: supports D1 D2
[ 0.233527] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.233596] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.233600] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff]
[ 0.233605] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.233607] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.233608] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.233610] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.233611] pci 0000:00:1e.0: bridge window [mem 0xb7d00000-0xfebfffff window] (subtractive decode)
[ 0.234223] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.234318] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.234407] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.234497] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.234586] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.234675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.234764] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.234855] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.235037] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.235037] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.235037] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.235037] vgaarb: loaded
[ 0.235037] pps_core: LinuxPPS API ver. 1 registered
[ 0.235037] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.235037] PTP clock support registered
[ 0.235037] EDAC MC: Ver: 3.0.0
[ 0.235037] PCI: Using ACPI for IRQ routing
[ 0.240600] PCI: pci_cache_line_size set to 64 bytes
[ 0.240635] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.240636] e820: reserve RAM buffer [mem 0xb7ce0000-0xb7ffffff]
[ 0.240748] NetLabel: Initializing
[ 0.240749] NetLabel: domain hash size = 128
[ 0.240750] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.240767] NetLabel: unlabeled traffic allowed by default
[ 0.240772] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.240772] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.240772] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.243371] clocksource: Switched to clocksource hpet
[ 0.258551] VFS: Disk quotas dquot_6.6.0
[ 0.258572] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.258668] pnp: PnP ACPI init
[ 0.258912] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.258914] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.258916] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.258918] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.258920] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.258927] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.259035] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.259222] pnp 00:02: [dma 2]
[ 0.259254] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.259534] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.259626] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.259741] system 00:05: [io 0x0400-0x04cf] could not be reserved
[ 0.259746] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260034] system 00:06: [mem 0xc0000000-0xcfffffff] has been reserved
[ 0.260039] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260308] system 00:07: [mem 0x000cc600-0x000cffff] has been reserved
[ 0.260310] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.260312] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.260314] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.260316] system 00:07: [mem 0xb7ce0000-0xb7cfffff] could not be reserved
[ 0.260318] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.260320] system 00:07: [mem 0x00100000-0xb7cdffff] could not be reserved
[ 0.260322] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.260324] system 00:07: [mem 0xfed13000-0xfed1dfff] has been reserved
[ 0.260326] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.260327] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.260329] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.260331] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.260333] system 00:07: [mem 0x000e0000-0x000effff] has been reserved
[ 0.260338] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.260345] pnp: PnP ACPI: found 8 devices
[ 0.266907] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.266921] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.266925] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.266927] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.266945] pci 0000:00:1c.0: BAR 14: assigned [mem 0xb7d00000-0xb7efffff]
[ 0.266949] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe1800000-0xe19fffff 64bit pref]
[ 0.266952] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.266955] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.266957] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.266961] pci 0000:00:1c.0: bridge window [mem 0xb7d00000-0xb7efffff]
[ 0.266964] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe19fffff 64bit pref]
[ 0.266970] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref]
[ 0.266972] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.266974] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.266978] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff]
[ 0.266981] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref]
[ 0.266986] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.266990] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff]
[ 0.266996] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.266998] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.266999] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.267001] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.267003] pci_bus 0000:00: resource 8 [mem 0xb7d00000-0xfebfffff window]
[ 0.267004] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.267006] pci_bus 0000:01: resource 1 [mem 0xb7d00000-0xb7efffff]
[ 0.267007] pci_bus 0000:01: resource 2 [mem 0xe1800000-0xe19fffff 64bit pref]
[ 0.267009] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.267010] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe0ffffff]
[ 0.267012] pci_bus 0000:02: resource 2 [mem 0xe1500000-0xe15fffff 64bit pref]
[ 0.267014] pci_bus 0000:03: resource 1 [mem 0xe1600000-0xe16fffff]
[ 0.267015] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.267017] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.267019] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.267020] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.267022] pci_bus 0000:03: resource 8 [mem 0xb7d00000-0xfebfffff window]
[ 0.267106] NET: Registered protocol family 2
[ 0.267309] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.267348] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.267462] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.267645] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.267695] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.267723] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.267790] NET: Registered protocol family 1
[ 0.267795] NET: Registered protocol family 44
[ 0.267805] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.283466] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x6c6 took 14641 usecs
[ 0.283489] PCI: CLS 32 bytes, default 64
[ 0.283529] Unpacking initramfs...
[ 0.401268] Freeing initrd memory: 7492K
[ 0.401273] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.401276] software IO TLB [mem 0xb3ce0000-0xb7ce0000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[ 0.401526] Scanning for low memory corruption every 60 seconds
[ 0.402205] Initialise system trusted keyrings
[ 0.402219] Key type blacklist registered
[ 0.402298] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[ 0.403888] zbud: loaded
[ 0.404193] pstore: using lz4hc compression
[ 0.406843] Key type asymmetric registered
[ 0.406845] Asymmetric key parser 'x509' registered
[ 0.406883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.406942] io scheduler noop registered
[ 0.406943] io scheduler deadline registered
[ 0.406994] io scheduler cfq registered (default)
[ 0.406995] io scheduler mq-deadline registered
[ 0.406996] io scheduler kyber registered
[ 0.407023] io scheduler bfq registered
[ 0.407577] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.407655] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.407656] vesafb: scrolling: redraw
[ 0.407658] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.407672] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
[ 0.431605] Console: switching to colour frame buffer device 128x48
[ 0.455418] fb0: VESA VGA frame buffer device
[ 0.455434] intel_idle: does not run on family 6 model 23
[ 0.455483] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.455493] ACPI: Power Button [PWRB]
[ 0.455558] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.455573] ACPI: Power Button [PWRF]
[ 0.456223] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.476794] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.478077] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.478336] NET: Registered protocol family 10
[ 0.482796] Segment Routing with IPv6
[ 0.482815] NET: Registered protocol family 17
[ 0.483103] RAS: Correctable Errors collector initialized.
[ 0.483137] microcode: sig=0x10676, pf=0x40, revision=0x0
[ 0.483208] microcode: Microcode Update Driver: v2.2.
[ 0.483361] registered taskstats version 1
[ 0.483369] Loading compiled-in X.509 certificates
[ 0.483385] zswap: loaded using pool lzo/zbud
[ 0.487136] Key type big_key registered
[ 0.487458] Magic number: 6:903:132
[ 0.487501] acpi device:07: hash matches
[ 0.487520] hctosys: unable to open rtc device (rtc0)
[ 0.487639] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 0.490038] Freeing unused kernel memory: 1488K
[ 0.490040] Write protecting the kernel read-only data: 16384k
[ 0.490799] Freeing unused kernel memory: 2016K
[ 0.492235] Freeing unused kernel memory: 568K
[ 0.574083] ACPI: bus type USB registered
[ 0.574116] usbcore: registered new interface driver usbfs
[ 0.574131] usbcore: registered new interface driver hub
[ 0.574175] usbcore: registered new device driver usb
[ 0.575653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.575869] ehci-pci: EHCI PCI platform driver
[ 0.576130] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.576137] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.579473] Floppy drive(s): fd0 is 1.44M
[ 0.579727] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 0.579729] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.580052] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.580070] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe1704000
[ 0.580468] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.580516] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.586501] SCSI subsystem initialized
[ 0.590952] libata version 3.00 loaded.
[ 0.591353] ata_piix 0000:00:1f.2: version 2.13
[ 0.591501] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.592441] scsi host0: ata_piix
[ 0.592738] scsi host1: ata_piix
[ 0.592780] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.592781] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.596705] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.596761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.596763] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.596765] usb usb1: Product: EHCI Host Controller
[ 0.596766] usb usb1: Manufacturer: Linux 4.18.3-arch1-1-ARCH ehci_hcd
[ 0.596768] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.596899] hub 1-0:1.0: USB hub found
[ 0.596907] hub 1-0:1.0: 8 ports detected
[ 0.597935] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.598053] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.598059] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.598066] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.598085] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100
[ 0.598136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 0.598138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.598140] usb usb2: Product: UHCI Host Controller
[ 0.598143] usb usb2: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd
[ 0.598145] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.598251] hub 2-0:1.0: USB hub found
[ 0.598258] hub 2-0:1.0: 2 ports detected
[ 0.598453] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.598458] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.598466] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.598493] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200
[ 0.598540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 0.598542] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.598543] usb usb3: Product: UHCI Host Controller
[ 0.598545] usb usb3: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd
[ 0.598546] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.598658] hub 3-0:1.0: USB hub found
[ 0.598664] hub 3-0:1.0: 2 ports detected
[ 0.598867] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.598872] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.598878] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.598901] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300
[ 0.598949] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 0.598951] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.598953] usb usb4: Product: UHCI Host Controller
[ 0.598954] usb usb4: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd
[ 0.598956] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.599072] hub 4-0:1.0: USB hub found
[ 0.599078] hub 4-0:1.0: 2 ports detected
[ 0.599283] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.599288] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.599297] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.599331] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
[ 0.599385] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[ 0.599387] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.599389] usb usb5: Product: UHCI Host Controller
[ 0.599390] usb usb5: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd
[ 0.599392] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.599505] hub 5-0:1.0: USB hub found
[ 0.599512] hub 5-0:1.0: 2 ports detected
[ 0.600527] FDC 0 is a post-1991 82077
[ 0.646719] firewire_ohci 0000:03:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 0.771156] ata1.01: HPA detected: current 976771055, native 976773168
[ 0.771160] ata1.01: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
[ 0.771162] ata1.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.776001] scsi 0:0:1:0: Direct-Access ATA TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5
[ 0.778966] sd 0:0:1:0: [sda] 976771055 512-byte logical blocks: (500 GB/466 GiB)
[ 0.778968] sd 0:0:1:0: [sda] 4096-byte physical blocks
[ 0.778989] sd 0:0:1:0: [sda] Write Protect is off
[ 0.778991] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 0.779030] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.836951] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 0.837802] sd 0:0:1:0: [sda] Attached SCSI disk
[ 0.926683] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.170125] firewire_core 0000:03:07.0: created device fw0: GUID 00488c0e0000241d, S400
[ 1.607744] usb 1-1: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95
[ 1.607748] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.607750] usb 1-1: Product: USB2.0-CRW
[ 1.607752] usb 1-1: Manufacturer: Generic
[ 1.607754] usb 1-1: SerialNumber: 20060413092100000
[ 1.611189] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 1.611389] scsi host2: usb-storage 1-1:1.0
[ 1.611485] usbcore: registered new interface driver usb-storage
[ 1.612011] usbcore: registered new interface driver uas
[ 1.851845] random: fast init done
[ 1.863368] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[ 2.110413] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.349378] usb 5-2: New USB device found, idVendor=04f2, idProduct=0403, bcdDevice= 1.44
[ 2.349382] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.349384] usb 5-2: Product: USB Keyboard
[ 2.349386] usb 5-2: Manufacturer: Chicony
[ 2.643294] scsi 2:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 2.649650] scsi 2:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 2.656024] scsi 2:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 2.662400] scsi 2:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 2.669628] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 2.670384] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 2.671128] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 2.671878] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 3.216595] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 3.233469] systemd[1]: Detected architecture x86-64.
[ 3.250530] systemd[1]: Set hostname to <shgr-mashina>.
[ 3.373547] random: crng init done
[ 4.353493] systemd[1]: Created slice system-getty.slice.
[ 4.353646] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.353754] systemd[1]: Listening on Journal Socket.
[ 4.353820] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.353890] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.358411] systemd[1]: Listening on LVM2 poll daemon socket.
[ 4.362855] systemd[1]: Listening on Process Core Dump Socket.
[ 4.491625] vboxdrv: loading out-of-tree module taints kernel.
[ 4.497425] vboxdrv: Found 4 processor cores
[ 4.497718] vboxdrv: fAsync=1 offMin=0x3ffe0c offMax=0x3ffe0c
[ 4.597870] vboxdrv: TSC mode is Asynchronous, tentative frequency 2666359682 Hz
[ 4.597872] vboxdrv: Successfully loaded version 5.2.18 (interface 0x00290001)
[ 4.728069] VBoxPciLinuxInit
[ 4.728076] vboxpci: IOMMU not found (not registered)
[ 4.729038] VBoxNetAdp: Successfully started.
[ 4.741291] VBoxNetFlt: Successfully started.
[ 4.867222] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[ 5.038648] systemd-journald[230]: Received request to flush runtime journal from PID 1
[ 6.996829] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 7.059318] rtc_cmos 00:01: RTC can wake from S4
[ 7.059462] rtc_cmos 00:01: registered as rtc0
[ 7.059484] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 7.084062] intel_rng: FWH not detected
[ 7.241183] Linux agpgart interface v0.103
[ 7.247558] leds_ss4200: no LED devices found
[ 7.349512] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.399 msecs
[ 7.349515] perf: interrupt took too long (10922 > 2500), lowering kernel.perf_event_max_sample_rate to 18300
[ 7.378678] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.710247] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 7.710261] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 7.710725] r8169 0000:02:00.0 eth0: RTL8168c/8111c, 00:24:1d:88:3e:cf, XID 3c4000c0, IRQ 24
[ 7.710727] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 8.055754] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 8.055757] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.055759] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.055761] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 8.055762] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
[ 8.055764] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 8.055766] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 8.055768] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 8.055769] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 8.055771] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c
[ 8.055772] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f
[ 8.076203] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.077142] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.077206] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.078665] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.078731] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.078794] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.078859] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.078923] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.078984] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.154861] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 8.206539] pci 0000:00:00.0: Intel G41 Chipset
[ 8.206557] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 8.216980] pci 0000:00:00.0: detected 131072K stolen memory
[ 8.217039] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 8.217040] fb: switching to inteldrmfb from VESA VGA
[ 8.217075] Console: switching to colour dummy device 80x25
[ 8.217212] [drm] Replacing VGA console driver
[ 8.217973] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.217974] [drm] Driver supports precise vblank timestamp query.
[ 8.218312] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.228877] [drm] RC6 disabled, disabling runtime PM support
[ 8.229450] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[ 8.283724] fbcon: inteldrmfb (fb0) is primary device
[ 8.306022] iTCO_vendor_support: vendor-support=0
[ 8.310676] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.310730] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 8.310852] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.313323] Console: switching to colour frame buffer device 170x48
[ 8.335478] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.739962] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 8.744729] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 9.003154] hidraw: raw HID events driver (C) Jiri Kosina
[ 9.069417] intel_powerclamp: No package C-state available
[ 9.111897] intel_powerclamp: No package C-state available
[ 9.166605] intel_powerclamp: No package C-state available
[ 9.208754] usbcore: registered new interface driver usbhid
[ 9.208756] usbhid: USB HID core driver
[ 9.220592] Adding 3071996k swap on /dev/sda5. Priority:-2 extents:1 across:3071996k FS
[ 9.242296] mousedev: PS/2 mouse device common for all mice
[ 9.282872] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:04F2:0403.0001/input/input15
[ 9.336990] hid-generic 0003:04F2:0403.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input0
[ 9.337325] input: Chicony USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/0003:04F2:0403.0002/input/input16
[ 9.395376] input: Chicony USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/0003:04F2:0403.0002/input/input17
[ 9.395490] hid-generic 0003:04F2:0403.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input1
[ 9.760711] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: data=ordered
[ 9.926287] fuse init (API version 7.27)
[ 11.780610] 8021q: 802.1Q VLAN Support v1.8
[ 11.874096] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.879690] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 11.879735] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 11.879738] cfg80211: failed to load regulatory.db
[ 11.986696] r8169 0000:02:00.0 enp2s0: link down
[ 11.986701] r8169 0000:02:00.0 enp2s0: link down
[ 11.986763] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 13.585084] r8169 0000:02:00.0 enp2s0: link up
[ 13.585089] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 27.705637] audit: type=1006 audit(1538579303.703:2): pid=567 uid=0 old-auid=4294967295 auid=996 tty=(none) old-ses=4294967295 ses=1 res=1
[ 30.811951] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 30.919624] Bridge firewalling registered
[ 31.463135] bpfilter: Loaded bpfilter_umh pid 607
[ 31.474313] audit: type=1325 audit(1538579307.473:3): table=filter family=2 entries=0
[ 31.474595] audit: type=1300 audit(1538579307.473:3): arch=c000003e syscall=175 success=yes exit=0 a0=55eb5083b6a0 a1=2308 a2=55eb5028dde6 a3=55eb50837010 items=0 ppid=169 pid=609 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
[ 31.474778] audit: type=1327 audit(1538579307.473:3): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
[ 31.893829] audit: type=1325 audit(1538579307.893:4): table=nat family=2 entries=0
[ 31.894172] audit: type=1300 audit(1538579307.893:4): arch=c000003e syscall=175 success=yes exit=0 a0=5575783372a0 a1=21e8 a2=55757739cde6 a3=557578331010 items=0 ppid=169 pid=615 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
[ 31.894175] audit: type=1327 audit(1538579307.893:4): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F6E6174
[ 31.953485] audit: type=1325 audit(1538579307.953:5): table=nat family=2 entries=5
[ 31.953492] audit: type=1300 audit(1538579307.953:5): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=556e4bdeea50 items=0 ppid=442 pid=641 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[ 31.954950] audit: type=1327 audit(1538579307.953:5): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D74006E6174002D4E00444F434B4552
[ 32.059228] Initializing XFRM netlink socket
[ 32.271143] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 32.365373] IPv6: ADDRCONF(NETDEV_UP): docker_gwbridge: link is not ready
[ 32.686305] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.472 msecs
[ 32.713176] kauditd_printk_skb: 129 callbacks suppressed
[ 32.713178] audit: type=1325 audit(1538579308.709:49): table=filter family=2 entries=23
[ 32.713184] audit: type=1300 audit(1538579308.709:49): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=564dfb489ca0 items=0 ppid=442 pid=759 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[ 32.713187] audit: type=1327 audit(1538579308.709:49): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D740066696C746572002D4900444F434B45522D49534F4C4154494F4E2D53544147452D31002D6900646F636B6572300000002D6F00646F636B657230002D6A00444F434B45522D49534F4C4154494F4E2D53544147452D32
[ 32.717473] audit: type=1325 audit(1538579308.716:50): table=filter family=2 entries=24
[ 32.717478] audit: type=1300 audit(1538579308.716:50): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=56447a56ee10 items=0 ppid=442 pid=761 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[ 32.717482] audit: type=1327 audit(1538579308.716:50): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D740066696C746572002D4900444F434B45522D49534F4C4154494F4E2D53544147452D32002D6F00646F636B657230002D6A0044524F50
[ 32.995017] audit: type=1325 audit(1538579308.993:51): table=filter family=2 entries=25
[ 32.995030] audit: type=1300 audit(1538579308.993:51): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=55d14df087f0 items=0 ppid=442 pid=763 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[ 32.995034] audit: type=1327 audit(1538579308.993:51): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D740066696C746572002D4E00444F434B45522D55534552
[ 33.001015] audit: type=1325 audit(1538579308.999:52): table=filter family=2 entries=27
[ 36.126703] br0: renamed from ov-001000-ftp5t
[ 36.173807] vxlan0: renamed from vx-001000-ftp5t
[ 36.188079] br0: port 1(vxlan0) entered blocking state
[ 36.188095] br0: port 1(vxlan0) entered disabled state
[ 36.188171] device vxlan0 entered promiscuous mode
[ 36.188503] br0: port 1(vxlan0) entered blocking state
[ 36.188505] br0: port 1(vxlan0) entered forwarding state
[ 36.546542] veth0: renamed from vethefeeac4
[ 36.573464] br0: port 2(veth0) entered blocking state
[ 36.573475] br0: port 2(veth0) entered disabled state
[ 36.573525] device veth0 entered promiscuous mode
[ 36.573649] br0: port 2(veth0) entered blocking state
[ 36.573651] br0: port 2(veth0) entered forwarding state
[ 36.878435] eth0: renamed from vethd6e84ee
[ 37.148812] docker_gwbridge: port 1(veth6df52c0) entered blocking state
[ 37.148828] docker_gwbridge: port 1(veth6df52c0) entered disabled state
[ 37.148914] device veth6df52c0 entered promiscuous mode
[ 37.149724] IPv6: ADDRCONF(NETDEV_UP): veth6df52c0: link is not ready
[ 37.149748] docker_gwbridge: port 1(veth6df52c0) entered blocking state
[ 37.149751] docker_gwbridge: port 1(veth6df52c0) entered forwarding state
[ 37.149871] docker_gwbridge: port 1(veth6df52c0) entered disabled state
[ 37.672416] eth1: renamed from veth41a2487
[ 37.719844] IPv6: ADDRCONF(NETDEV_CHANGE): veth6df52c0: link becomes ready
[ 37.719901] docker_gwbridge: port 1(veth6df52c0) entered blocking state
[ 37.719903] docker_gwbridge: port 1(veth6df52c0) entered forwarding state
[ 37.719945] IPv6: ADDRCONF(NETDEV_CHANGE): docker_gwbridge: link becomes ready
[ 38.188629] kauditd_printk_skb: 49 callbacks suppressed
[ 38.188633] audit: type=1325 audit(1538579314.186:70): table=filter family=2 entries=29
[ 38.188644] audit: type=1300 audit(1538579314.186:70): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=555b134024f0 items=0 ppid=442 pid=943 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[ 38.188647] audit: type=1327 audit(1538579314.186:70): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D4400464F5257415244002D6A00444F434B45522D55534552
[ 38.191121] audit: type=1325 audit(1538579314.189:71): table=filter family=2 entries=28
[ 38.191125] audit: type=1300 audit(1538579314.189:71): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=564ace7e42e0 items=0 ppid=442 pid=944 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[ 38.191128] audit: type=1327 audit(1538579314.189:71): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D4900464F5257415244002D6A00444F434B45522D55534552
[ 43.402885] perf: interrupt took too long (22536 > 13652), lowering kernel.perf_event_max_sample_rate to 8700
[ 128.610009] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 150.659593] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.477 msecs
[ 150.659596] perf: interrupt took too long (31007 > 28170), lowering kernel.perf_event_max_sample_rate to 6300
В BIOS award 6 все включил. Да там особо ничего и нет для памяти, кроме регулировки частоты.
dmesg | grep Memory
[ 0.000000] Memory: 3898760K/4059640K available (10252K kernel code, 1297K rwdata, 3528K rodata, 1488K init, 612K bss, 160880K reserved, 0K cma-reserved)
[ 0.206890] x86/mm: Memory block size: 128MB
Перестановки много делал без толку.
Процессор обновил недавно, core duo на Xeon X5450(Кстати китайцы переделали этот процессор под сокет LGA775). Думаю причина не может быть в этом.
|