Заставить работать модули памяти

deidara	# 5 лет, 7 месяцев назад (отредактировано 5 лет, 7 месяцев назад)
Темы: 3 Сообщения: 15 Участник с: 26 октября 2017	Здравствуйте. На данный момент в компьютере установлены 4 модули памяти, два 2ГБ и два по 1ГБ. Работают только 4 ГБ. Также ставил 2ГБ вместо двух 1ГБ модулей(в любом случае было бы 6ГБ). В Windows 10 все работают, хотя в Биосе видны токо 4 ГБ. Линукс распознает все планки, но не все работают. Что я имею в виду: sudo dmidecode --type 17 # dmidecode 3.1 Getting SMBIOS data from sysfs. SMBIOS 2.4 present. Handle 0x001A, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: None Speed: 800 MT/s Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x001B, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: None Speed: 800 MT/s Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x001C, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: None Locator: A2 Bank Locator: Bank4/5 Type: Unknown Type Detail: None Speed: 800 MT/s Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x001D, DMI type 17, 27 bytes Memory Device Array Handle: 0x0019 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: A3 Bank Locator: Bank6/7 Type: Unknown Type Detail: None Speed: 800 MT/s Manufacturer: Serial Number: Asset Tag: Part Number: Также `free -m total used free shared buff/cache available Mem: 3912 2908 175 187 828 607 Swap: 2999 1930 1069` :

# 5 лет, 7 месяцев назад (отредактировано 5 лет, 7 месяцев назад)

Сообщения: 15

Участник с: 26 октября 2017

Здравствуйте.
На данный момент в компьютере установлены 4 модули памяти, два 2ГБ и два по 1ГБ. Работают только 4 ГБ. Также ставил 2ГБ вместо двух 1ГБ модулей(в любом случае было бы 6ГБ). В Windows 10 все работают, хотя в Биосе видны токо 4 ГБ. Линукс распознает все планки, но не все работают. Что я имею в виду:


sudo dmidecode --type 17
# dmidecode 3.1
Getting SMBIOS data from sysfs.
SMBIOS 2.4 present.

Handle 0x001A, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0019
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: None
	Locator: A0
	Bank Locator: Bank0/1
	Type: Unknown
	Type Detail: None
	Speed: 800 MT/s
	Manufacturer:
	Serial Number:
	Asset Tag:
	Part Number:

Handle 0x001B, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0019
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: None
	Locator: A1
	Bank Locator: Bank2/3
	Type: Unknown
	Type Detail: None
	Speed: 800 MT/s
	Manufacturer:
	Serial Number:
	Asset Tag:
	Part Number:

Handle 0x001C, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0019
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 2048 MB
	Form Factor: DIMM
	Set: None
	Locator: A2
	Bank Locator: Bank4/5
	Type: Unknown
	Type Detail: None
	Speed: 800 MT/s
	Manufacturer:
	Serial Number:
	Asset Tag:
	Part Number:

Handle 0x001D, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0019
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 1024 MB
	Form Factor: DIMM
	Set: None
	Locator: A3
	Bank Locator: Bank6/7
	Type: Unknown
	Type Detail: None
	Speed: 800 MT/s
	Manufacturer:
	Serial Number:
	Asset Tag:
	Part Number:

Также


free -m
              total        used        free      shared  buff/cache   available
Mem:           3912        2908         175         187         828         607
Swap:          2999        1930        1069

vasek	# 5 лет, 7 месяцев назад
Темы: 47 Сообщения: 11742 Участник с: 17 февраля 2013	deidara в компьютере установлены 4 модули памяти, два 2ГБ и два по 1ГБ. Работают только 4 ГБ. Уверен, что установил правильно, в нужные слоты? Установлены соответствующие требования по установке планок памяти в слоты. Ошибки не исчезают с опытом - они просто умнеют

vasek

# 5 лет, 7 месяцев назад

Темы: 47

Сообщения: 11742

Участник с: 17 февраля 2013

deidara
в компьютере установлены 4 модули памяти, два 2ГБ и два по 1ГБ. Работают только 4 ГБ.

Уверен, что установил правильно, в нужные слоты? Установлены соответствующие требования по установке планок памяти в слоты.

Ошибки не исчезают с опытом - они просто умнеют

RusWolf	# 5 лет, 7 месяцев назад
Темы: 11 Сообщения: 2712 Участник с: 16 июля 2016	deidara В Windows 10 все работают, хотя в Биосе видны токо 4 ГБ. Линукс распознает все планки, но не все работают Какой именно "линукс" и сколько разрядный твой "линукс"?

vasek	# 5 лет, 7 месяцев назад (отредактировано 5 лет, 7 месяцев назад)
Темы: 47 Сообщения: 11742 Участник с: 17 февраля 2013	deidara В Windows 10 все работают, хотя в Биосе видны токо 4 ГБ. Работают похоже только 2 планки по 2 G, похоже они же и определяются в BIOS. Вот почему не видно в BIOS 2 планки по 1G? Остается гадать, информации нет. Что написано на планках, какое наряжение, какой тип и др? Скорее всего DDR3/800, dmidecode иногда не может определить тип памяти и в данном случае похоже тоже. Неплохо посмотреть другие выводы, например, sudo lshw -short -C memory \| grep MHz, вывод dmesg (может что то не нравится ядру), может что то не включено/отключено в BIOS, вообщем нужно больше информации. Можно попробовать переставить планки, можно вообще попробовать сначала работу только с 1-ой планкой, поочередно меняя их, если все нормально определяются начни добавлять по 1-ой, вообщем нужно смотреть и пробовать + конечно же посмотреть тип памяти, параметры, все ли одинаковы. А так тяжело судить в чем причина. EDIT 1 - неплохо также посмотреть и вывод dmesg \| grep Memory, в котором будет указан общий объем памяти, например ... Memory: 6027080K/6224248K available (10252K kernel code, 1298K rwdata, 3524K rodata, 1488K init, 612K bss, 197168K reserved, 0K cma-reserved) EDIT 2 - где описывал про перестанавку планок, неплохо бы проверить рабочую планку во всех слотах, может слоты не рабочие? Ошибки не исчезают с опытом - они просто умнеют

vasek

# 5 лет, 7 месяцев назад (отредактировано 5 лет, 7 месяцев назад)

Темы: 47

Сообщения: 11742

Участник с: 17 февраля 2013

deidara
В Windows 10 все работают, хотя в Биосе видны токо 4 ГБ.

Работают похоже только 2 планки по 2 G, похоже они же и определяются в BIOS. Вот почему не видно в BIOS 2 планки по 1G? Остается гадать, информации нет.
Что написано на планках, какое наряжение, какой тип и др? Скорее всего DDR3/800, dmidecode иногда не может определить тип памяти и в данном случае похоже тоже.
Неплохо посмотреть другие выводы, например, sudo lshw -short -C memory | grep MHz, вывод dmesg (может что то не нравится ядру), может что то не включено/отключено в BIOS, вообщем нужно больше информации.
Можно попробовать переставить планки, можно вообще попробовать сначала работу только с 1-ой планкой, поочередно меняя их, если все нормально определяются начни добавлять по 1-ой, вообщем нужно смотреть и пробовать + конечно же посмотреть тип памяти, параметры, все ли одинаковы.
А так тяжело судить в чем причина.

EDIT 1 - неплохо также посмотреть и вывод dmesg | grep Memory, в котором будет указан общий объем памяти, например
... Memory: 6027080K/6224248K available (10252K kernel code, 1298K rwdata, 3524K rodata, 1488K init, 612K bss, 197168K reserved, 0K cma-reserved)

EDIT 2 - где описывал про перестанавку планок, неплохо бы проверить рабочую планку во всех слотах, может слоты не рабочие?

Ошибки не исчезают с опытом - они просто умнеют

redix	# 5 лет, 7 месяцев назад
Темы: 34 Сообщения: 3432 Участник с: 11 марта 2013	vasek, это во второй пенек можно было натолкать разнобой, в современных чипсетах этот фокус не проходит. Подождем когда ТС скажет, что за железки у него, гадать не имеет смысла. In Tux We Trust

vasek	# 5 лет, 7 месяцев назад
Темы: 47 Сообщения: 11742 Участник с: 17 февраля 2013	redix, на старое железо наводит Speed: 800 MT/s - давно уже такое думаю и не выпускают - вот и гадай, то ли старое железо, то ли старые модули сунули в новое железо. Да и dmidecode не определил ни тип памяти, ни другие параметры. Ошибки не исчезают с опытом - они просто умнеют

vasek

# 5 лет, 7 месяцев назад

Темы: 47

Сообщения: 11742

Участник с: 17 февраля 2013

redix, на старое железо наводит Speed: 800 MT/s - давно уже такое думаю и не выпускают - вот и гадай, то ли старое железо, то ли старые модули сунули в новое железо. Да и dmidecode не определил ни тип памяти, ни другие параметры.

Ошибки не исчезают с опытом - они просто умнеют

redix	# 5 лет, 7 месяцев назад
Темы: 34 Сообщения: 3432 Участник с: 11 марта 2013	Я видел, похоже это DDR2. In Tux We Trust

vasek	# 5 лет, 7 месяцев назад
Темы: 47 Сообщения: 11742 Участник с: 17 февраля 2013	redix похоже это DDR2 или DDR2-800 или DDR3-800, в любом случае, думаю, уже не выпускаются. Ошибки не исчезают с опытом - они просто умнеют

deidara	# 5 лет, 6 месяцев назад (отредактировано 5 лет, 6 месяцев назад)
Темы: 3 Сообщения: 15 Участник с: 26 октября 2017	To RusWolf Linux 4.18.3-arch1-1-ARCH x86_64 To vasek DDR2 800 Этих 4 ссылка на алибабу Эти стояли старые 2 hynix korea 9 1GB PC2-6400U-666-12, HYMP112U64CP8-S6 AB-C все что написано. Вроде они 800 МГц ссылка на ибэй На самом деле 1Гб планок у меня много, есть самсунги, кингстон и еще пара тройка планок непопулярных фирм, они тоже в связке не работают. Все DDR2 800 МГц dimm. В общем дело такое, мать я менял и она довольно новая, но как оказалось старого производства. Ссылка на спецификацию А вот че интересно, там красными буквами написано: * Do not populate both DIMM sockets of the same channel (e.g. DDR and DDR2), or populate 4 DIMM sockets with double-sided memory modules to prevent system's failure to start or incorrect detection of memory modules. Please refer to the user manual for the memory configurations table. Т.е. 4 модуля Dimm не работают одновременно, или только черные чипы памяти должны быть на двух сторонах обязательно. Так или иначе 4 не работают. Раньше тоже не мог его заставить работать 4 1Гб модули, получаются они все dimm, но чипы у 1Гб не у всех на друх сторонах. Конкретно у hynixов только на одной стороне, вот поэтому я их и пытался заставить работать. Мне хотя бы 3 заставить работать. 3 по 2ГБ. Оказывается в Windows 10, работают только 2x2Гб + 2x1Гб планки, а вот 3x2Гб нет(системная ошибка, перезагрузка). Т.е. все 4 стола рабочие, я это всегда знал, по одному проверял. В linux тоже хоть в любую засовывай по 1 и запускай нормально, хоть 1 ГБ хоть 2 ГБ. sudo lshw -short -C memory \| grep MHz `/0/19/0 memory 2GiB DIMM 800 MHz (1.2 ns) /0/19/1 memory 1GiB DIMM 800 MHz (1.2 ns) /0/19/2 memory 2GiB DIMM 800 MHz (1.2 ns) /0/19/3 memory 1GiB DIMM 800 MHz (1.2 ns)` dmesg [ 0.000000] Linux version 4.18.3-arch1-1-ARCH (builduser@heftig-24267) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Sat Aug 18 09:22:54 UTC 2018 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1ece481f-9aa9-42a1-aa39-5c41a6283373 rw quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7cdffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7ce0000-0x00000000b7ce2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b7ce3000-0x00000000b7ceffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b7cf0000-0x00000000b7cfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 0F00000000 write-back [ 0.000000] 1 base 00C0000000 mask 0FC0000000 uncachable [ 0.000000] 2 base 00B8000000 mask 0FF8000000 uncachable [ 0.000000] 3 base 00B7E00000 mask 0FFFE00000 uncachable [ 0.000000] 4 base 0100000000 mask 0FC0000000 write-back [ 0.000000] 5 base 00B7D00000 mask 0FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] total RAM covered: 3965M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 6 lose cover RAM: 0G [ 0.000000] e820: update [mem 0xb7d00000-0xffffffff] usable ==> reserved [ 0.000000] last_pfn = 0xb7ce0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f5760-0x000f576f] mapped at [(____ptrval____)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576 [ 0.000000] BRK [0x8b076000, 0x8b076fff] PGTABLE [ 0.000000] BRK [0x8b077000, 0x8b077fff] PGTABLE [ 0.000000] BRK [0x8b078000, 0x8b078fff] PGTABLE [ 0.000000] BRK [0x8b079000, 0x8b079fff] PGTABLE [ 0.000000] BRK [0x8b07a000, 0x8b07afff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3714d000-0x3789dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F7150 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000B7CE3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000B7CE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000B7CE3180 003DE7 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x00000000B7CE0000 000040 [ 0.000000] ACPI: HPET 0x00000000B7CE70C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000B7CE7140 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 0x00000000B7CE7180 006442 (v01 GBT GBT B0 5455312E BG?? 00020101) [ 0.000000] ACPI: APIC 0x00000000B7CE6FC0 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000B7CEDEF0 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffcfff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b7cdffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.000000] Reserved but unavailable: 898 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.000000] On node 0 totalpages: 1014910 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11700 pages used for memmap [ 0.000000] DMA32 zone: 748768 pages, LIFO batch:31 [ 0.000000] Normal zone: 4096 pages used for memmap [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at [mem 0xb8000000-0xbfffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7ce0000-0xb7ce2fff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7ce3000-0xb7ceffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7cf0000-0xb7cfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb7d00000-0xb7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xb8000000-0xcfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] [mem 0xd0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=12097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999029 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1ece481f-9aa9-42a1-aa39-5c41a6283373 rw quiet [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3898760K/4059640K available (10252K kernel code, 1297K rwdata, 3528K rodata, 1488K init, 612K bss, 160880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 33392 entries in 131 pages [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4. [ 0.000000] RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16 [ 0.000000] Offload RCU callbacks from CPUs: (none). [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x95, should be 0xC6 (20180531/tbprint-177) [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.016666] tsc: Fast TSC calibration using PIT [ 0.019999] tsc: Detected 2666.151 MHz processor [ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x266e5651bbd, max_idle_ns: 440795206380 ns [ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5334.48 BogoMIPS (lpj=8887170) [ 0.019999] pid_max: default: 32768 minimum: 301 [ 0.019999] Security Framework initialized [ 0.019999] Yama: becoming mindful. [ 0.019999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.019999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.019999] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.019999] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.019999] mce: CPU supports 6 MCE banks [ 0.019999] CPU0: Thermal monitoring enabled (TM2) [ 0.019999] process: using mwait in idle threads [ 0.019999] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.019999] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.019999] Spectre V2 : Mitigation: Full generic retpoline [ 0.019999] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.019999] Speculative Store Bypass: Vulnerable [ 0.019999] Freeing SMP alternatives memory: 28K [ 0.029999] smpboot: CPU0: Intel(R) Xeon(R) CPU X5450 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0x6) [ 0.046680] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.046690] ... version: 2 [ 0.046692] ... bit width: 40 [ 0.046692] ... generic registers: 2 [ 0.046694] ... value mask: 000000ffffffffff [ 0.046695] ... max period: 000000007fffffff [ 0.046696] ... fixed-purpose events: 3 [ 0.046697] ... event mask: 0000000700000003 [ 0.053338] Hierarchical SRCU implementation. [ 0.073502] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.080005] smp: Bringing up secondary CPUs ... [ 0.120021] x86: Booting SMP configuration: [ 0.120023] .... node #0, CPUs: #1 [ 0.122894] TSC synchronization [CPU#0 -> CPU#1]: [ 0.122895] Measured 4195652 cycles TSC warp between CPUs, turning off TSC clock. [ 0.122896] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 0.160018] #2 #3 [ 0.200898] smp: Brought up 1 node, 4 CPUs [ 0.200898] smpboot: Max logical packages: 1 [ 0.200898] smpboot: Total of 4 processors activated (21337.92 BogoMIPS) [ 0.206890] devtmpfs: initialized [ 0.206890] x86/mm: Memory block size: 128MB [ 0.207248] PM: Registering ACPI NVS region [mem 0xb7ce0000-0xb7ce2fff] (12288 bytes) [ 0.207248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.207248] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.207248] pinctrl core: initialized pinctrl subsystem [ 0.207248] RTC time: 15:07:57, date: 10/03/18 [ 0.207248] NET: Registered protocol family 16 [ 0.207248] audit: initializing netlink subsys (disabled) [ 0.207248] audit: type=2000 audit(1538579276.206:1): state=initialized audit_enabled=0 res=1 [ 0.207248] cpuidle: using governor ladder [ 0.207248] cpuidle: using governor menu [ 0.207248] ACPI: bus type PCI registered [ 0.207248] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.207248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.207248] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 0.207248] PCI: Using configuration type 1 for base access [ 0.210050] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.210135] ACPI: Added _OSI(Module Device) [ 0.210136] ACPI: Added _OSI(Processor Device) [ 0.210137] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.210138] ACPI: Added _OSI(Processor Aggregator Device) [ 0.210139] ACPI: Added _OSI(Linux-Dell-Video) [ 0.213715] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.216335] ACPI: Dynamic OEM Table Load: [ 0.216342] ACPI: SSDT 0xFFFF9CFC7AA73C00 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.216618] ACPI: Dynamic OEM Table Load: [ 0.216622] ACPI: SSDT 0xFFFF9CFC7AAF8000 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.216866] ACPI: Dynamic OEM Table Load: [ 0.216870] ACPI: SSDT 0xFFFF9CFC7AAF9200 000152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.217096] ACPI: Dynamic OEM Table Load: [ 0.217100] ACPI: SSDT 0xFFFF9CFC7AAF9A00 000152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.217483] ACPI: Interpreter enabled [ 0.217503] ACPI: (supports S0 S3 S4 S5) [ 0.217505] ACPI: Using IOAPIC for interrupt routing [ 0.217530] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.217697] ACPI: Enabled 10 GPEs in block 00 to 1F [ 0.223056] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.223062] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.223067] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.223374] PCI host bridge to bus 0000:00 [ 0.223376] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.223378] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.223380] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.223381] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.223383] pci_bus 0000:00: root bus resource [mem 0xb7d00000-0xfebfffff window] [ 0.223385] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.223394] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000 [ 0.223416] DMAR: Forcing write-buffer flush capability [ 0.223417] DMAR: Disabling IOMMU for graphics on this chipset [ 0.223517] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000 [ 0.223528] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] [ 0.223534] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.223538] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe007] [ 0.223647] pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000 [ 0.223657] pci 0000:00:02.1: reg 0x10: [mem 0xe1400000-0xe14fffff 64bit] [ 0.223793] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.223811] pci 0000:00:1b.0: reg 0x10: [mem 0xe1700000-0xe1703fff 64bit] [ 0.223874] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.223985] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.224052] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.224162] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.224229] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.224340] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.224377] pci 0000:00:1d.0: reg 0x20: [io 0xe100-0xe11f] [ 0.224489] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.224526] pci 0000:00:1d.1: reg 0x20: [io 0xe200-0xe21f] [ 0.224638] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.224674] pci 0000:00:1d.2: reg 0x20: [io 0xe300-0xe31f] [ 0.224787] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.224823] pci 0000:00:1d.3: reg 0x20: [io 0xe400-0xe41f] [ 0.224939] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.224956] pci 0000:00:1d.7: reg 0x10: [mem 0xe1704000-0xe17043ff] [ 0.225115] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.225256] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.225331] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.225335] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.225338] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.225341] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.225455] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x010180 [ 0.225469] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007] [ 0.225476] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003] [ 0.225482] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007] [ 0.225488] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003] [ 0.225495] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f] [ 0.225508] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.225510] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.225511] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.225513] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.225532] pci 0000:00:1f.2: PME# supported from D3hot [ 0.225628] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.225677] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.225825] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.225883] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.225909] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.225934] pci 0000:02:00.0: reg 0x18: [mem 0xe1510000-0xe1510fff 64bit pref] [ 0.225950] pci 0000:02:00.0: reg 0x20: [mem 0xe1500000-0xe150ffff 64bit pref] [ 0.225961] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.226037] pci 0000:02:00.0: supports D1 D2 [ 0.226039] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.226129] pci 0000:00:1c.1: ASPM: current common clock configuration is broken, reconfiguring [ 0.233357] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.233361] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.233365] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff] [ 0.233370] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.233388] pci_bus 0000:03: extended config space not accessible [ 0.233428] pci 0000:03:07.0: [104c:8024] type 00 class 0x0c0010 [ 0.233445] pci 0000:03:07.0: reg 0x10: [mem 0xe1604000-0xe16047ff] [ 0.233455] pci 0000:03:07.0: reg 0x14: [mem 0xe1600000-0xe1603fff] [ 0.233526] pci 0000:03:07.0: supports D1 D2 [ 0.233527] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot [ 0.233596] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.233600] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff] [ 0.233605] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.233607] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.233608] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.233610] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.233611] pci 0000:00:1e.0: bridge window [mem 0xb7d00000-0xfebfffff window] (subtractive decode) [ 0.234223] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.234318] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.234407] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.234497] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.234586] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) 0, disabled. [ 0.234675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) 0, disabled. [ 0.234764] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) 0, disabled. [ 0.234855] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.235037] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.235037] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.235037] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.235037] vgaarb: loaded [ 0.235037] pps_core: LinuxPPS API ver. 1 registered [ 0.235037] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.235037] PTP clock support registered [ 0.235037] EDAC MC: Ver: 3.0.0 [ 0.235037] PCI: Using ACPI for IRQ routing [ 0.240600] PCI: pci_cache_line_size set to 64 bytes [ 0.240635] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.240636] e820: reserve RAM buffer [mem 0xb7ce0000-0xb7ffffff] [ 0.240748] NetLabel: Initializing [ 0.240749] NetLabel: domain hash size = 128 [ 0.240750] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.240767] NetLabel: unlabeled traffic allowed by default [ 0.240772] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.240772] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.240772] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.243371] clocksource: Switched to clocksource hpet [ 0.258551] VFS: Disk quotas dquot_6.6.0 [ 0.258572] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.258668] pnp: PnP ACPI init [ 0.258912] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.258914] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.258916] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.258918] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.258920] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.258927] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.259035] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.259222] pnp 00:02: [dma 2] [ 0.259254] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.259534] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.259626] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.259741] system 00:05: [io 0x0400-0x04cf] could not be reserved [ 0.259746] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.260034] system 00:06: [mem 0xc0000000-0xcfffffff] has been reserved [ 0.260039] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.260308] system 00:07: [mem 0x000cc600-0x000cffff] has been reserved [ 0.260310] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.260312] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.260314] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.260316] system 00:07: [mem 0xb7ce0000-0xb7cfffff] could not be reserved [ 0.260318] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.260320] system 00:07: [mem 0x00100000-0xb7cdffff] could not be reserved [ 0.260322] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.260324] system 00:07: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.260326] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.260327] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.260329] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.260331] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved [ 0.260333] system 00:07: [mem 0x000e0000-0x000effff] has been reserved [ 0.260338] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.260345] pnp: PnP ACPI: found 8 devices [ 0.266907] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.266921] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.266925] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.266927] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.266945] pci 0000:00:1c.0: BAR 14: assigned [mem 0xb7d00000-0xb7efffff] [ 0.266949] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.266952] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.266955] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.266957] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.266961] pci 0000:00:1c.0: bridge window [mem 0xb7d00000-0xb7efffff] [ 0.266964] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.266970] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref] [ 0.266972] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.266974] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.266978] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff] [ 0.266981] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.266986] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.266990] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff] [ 0.266996] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.266998] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.266999] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.267001] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.267003] pci_bus 0000:00: resource 8 [mem 0xb7d00000-0xfebfffff window] [ 0.267004] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.267006] pci_bus 0000:01: resource 1 [mem 0xb7d00000-0xb7efffff] [ 0.267007] pci_bus 0000:01: resource 2 [mem 0xe1800000-0xe19fffff 64bit pref] [ 0.267009] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.267010] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe0ffffff] [ 0.267012] pci_bus 0000:02: resource 2 [mem 0xe1500000-0xe15fffff 64bit pref] [ 0.267014] pci_bus 0000:03: resource 1 [mem 0xe1600000-0xe16fffff] [ 0.267015] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.267017] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.267019] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.267020] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.267022] pci_bus 0000:03: resource 8 [mem 0xb7d00000-0xfebfffff window] [ 0.267106] NET: Registered protocol family 2 [ 0.267309] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) [ 0.267348] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.267462] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.267645] TCP: Hash tables configured (established 32768 bind 32768) [ 0.267695] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.267723] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.267790] NET: Registered protocol family 1 [ 0.267795] NET: Registered protocol family 44 [ 0.267805] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.283466] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x6c6 took 14641 usecs [ 0.283489] PCI: CLS 32 bytes, default 64 [ 0.283529] Unpacking initramfs... [ 0.401268] Freeing initrd memory: 7492K [ 0.401273] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.401276] software IO TLB [mem 0xb3ce0000-0xb7ce0000] (64MB) mapped at [(____ptrval____)-(____ptrval____)] [ 0.401526] Scanning for low memory corruption every 60 seconds [ 0.402205] Initialise system trusted keyrings [ 0.402219] Key type blacklist registered [ 0.402298] workingset: timestamp_bits=41 max_order=20 bucket_order=0 [ 0.403888] zbud: loaded [ 0.404193] pstore: using lz4hc compression [ 0.406843] Key type asymmetric registered [ 0.406845] Asymmetric key parser 'x509' registered [ 0.406883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.406942] io scheduler noop registered [ 0.406943] io scheduler deadline registered [ 0.406994] io scheduler cfq registered (default) [ 0.406995] io scheduler mq-deadline registered [ 0.406996] io scheduler kyber registered [ 0.407023] io scheduler bfq registered [ 0.407577] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.407655] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.407656] vesafb: scrolling: redraw [ 0.407658] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.407672] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k [ 0.431605] Console: switching to colour frame buffer device 128x48 [ 0.455418] fb0: VESA VGA frame buffer device [ 0.455434] intel_idle: does not run on family 6 model 23 [ 0.455483] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.455493] ACPI: Power Button [PWRB] [ 0.455558] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.455573] ACPI: Power Button [PWRF] [ 0.456223] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.476794] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.478077] ledtrig-cpu: registered to indicate activity on CPUs [ 0.478336] NET: Registered protocol family 10 [ 0.482796] Segment Routing with IPv6 [ 0.482815] NET: Registered protocol family 17 [ 0.483103] RAS: Correctable Errors collector initialized. [ 0.483137] microcode: sig=0x10676, pf=0x40, revision=0x0 [ 0.483208] microcode: Microcode Update Driver: v2.2. [ 0.483361] registered taskstats version 1 [ 0.483369] Loading compiled-in X.509 certificates [ 0.483385] zswap: loaded using pool lzo/zbud [ 0.487136] Key type big_key registered [ 0.487458] Magic number: 6:903:132 [ 0.487501] acpi device:07: hash matches [ 0.487520] hctosys: unable to open rtc device (rtc0) [ 0.487639] Unstable clock detected, switching default tracing clock to "global" If you want to keep using the local clock, then add: "trace_clock=local" on the kernel command line [ 0.490038] Freeing unused kernel memory: 1488K [ 0.490040] Write protecting the kernel read-only data: 16384k [ 0.490799] Freeing unused kernel memory: 2016K [ 0.492235] Freeing unused kernel memory: 568K [ 0.574083] ACPI: bus type USB registered [ 0.574116] usbcore: registered new interface driver usbfs [ 0.574131] usbcore: registered new interface driver hub [ 0.574175] usbcore: registered new device driver usb [ 0.575653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.575869] ehci-pci: EHCI PCI platform driver [ 0.576130] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.576137] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.579473] Floppy drive(s): fd0 is 1.44M [ 0.579727] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12 [ 0.579729] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 0.580052] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 0.580070] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe1704000 [ 0.580468] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.580516] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.586501] SCSI subsystem initialized [ 0.590952] libata version 3.00 loaded. [ 0.591353] ata_piix 0000:00:1f.2: version 2.13 [ 0.591501] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 0.592441] scsi host0: ata_piix [ 0.592738] scsi host1: ata_piix [ 0.592780] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.592781] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.596705] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.596761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 0.596763] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.596765] usb usb1: Product: EHCI Host Controller [ 0.596766] usb usb1: Manufacturer: Linux 4.18.3-arch1-1-ARCH ehci_hcd [ 0.596768] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.596899] hub 1-0:1.0: USB hub found [ 0.596907] hub 1-0:1.0: 8 ports detected [ 0.597935] uhci_hcd: USB Universal Host Controller Interface driver [ 0.598053] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.598059] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.598066] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.598085] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100 [ 0.598136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 0.598138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.598140] usb usb2: Product: UHCI Host Controller [ 0.598143] usb usb2: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd [ 0.598145] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.598251] hub 2-0:1.0: USB hub found [ 0.598258] hub 2-0:1.0: 2 ports detected [ 0.598453] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.598458] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.598466] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.598493] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 [ 0.598540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 0.598542] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.598543] usb usb3: Product: UHCI Host Controller [ 0.598545] usb usb3: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd [ 0.598546] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.598658] hub 3-0:1.0: USB hub found [ 0.598664] hub 3-0:1.0: 2 ports detected [ 0.598867] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.598872] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.598878] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.598901] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300 [ 0.598949] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 0.598951] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.598953] usb usb4: Product: UHCI Host Controller [ 0.598954] usb usb4: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd [ 0.598956] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.599072] hub 4-0:1.0: USB hub found [ 0.599078] hub 4-0:1.0: 2 ports detected [ 0.599283] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.599288] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.599297] uhci_hcd 0000:00:1d.3: detected 2 ports [ 0.599331] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 [ 0.599385] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18 [ 0.599387] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.599389] usb usb5: Product: UHCI Host Controller [ 0.599390] usb usb5: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd [ 0.599392] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.599505] hub 5-0:1.0: USB hub found [ 0.599512] hub 5-0:1.0: 2 ports detected [ 0.600527] FDC 0 is a post-1991 82077 [ 0.646719] firewire_ohci 0000:03:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 0.771156] ata1.01: HPA detected: current 976771055, native 976773168 [ 0.771160] ata1.01: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133 [ 0.771162] ata1.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.776001] scsi 0:0:1:0: Direct-Access ATA TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5 [ 0.778966] sd 0:0:1:0: [sda] 976771055 512-byte logical blocks: (500 GB/466 GiB) [ 0.778968] sd 0:0:1:0: [sda] 4096-byte physical blocks [ 0.778989] sd 0:0:1:0: [sda] Write Protect is off [ 0.778991] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 0.779030] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.836951] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > [ 0.837802] sd 0:0:1:0: [sda] Attached SCSI disk [ 0.926683] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.170125] firewire_core 0000:03:07.0: created device fw0: GUID 00488c0e0000241d, S400 [ 1.607744] usb 1-1: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95 [ 1.607748] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.607750] usb 1-1: Product: USB2.0-CRW [ 1.607752] usb 1-1: Manufacturer: Generic [ 1.607754] usb 1-1: SerialNumber: 20060413092100000 [ 1.611189] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1.611389] scsi host2: usb-storage 1-1:1.0 [ 1.611485] usbcore: registered new interface driver usb-storage [ 1.612011] usbcore: registered new interface driver uas [ 1.851845] random: fast init done [ 1.863368] usb 5-2: new low-speed USB device number 2 using uhci_hcd [ 2.110413] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 2.349378] usb 5-2: New USB device found, idVendor=04f2, idProduct=0403, bcdDevice= 1.44 [ 2.349382] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.349384] usb 5-2: Product: USB Keyboard [ 2.349386] usb 5-2: Manufacturer: Chicony [ 2.643294] scsi 2:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 2.649650] scsi 2:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 2.656024] scsi 2:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 2.662400] scsi 2:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 2.669628] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 2.670384] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 2.671128] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 2.671878] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 3.216595] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) [ 3.233469] systemd[1]: Detected architecture x86-64. [ 3.250530] systemd[1]: Set hostname to <shgr-mashina>. [ 3.373547] random: crng init done [ 4.353493] systemd[1]: Created slice system-getty.slice. [ 4.353646] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.353754] systemd[1]: Listening on Journal Socket. [ 4.353820] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 4.353890] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 4.358411] systemd[1]: Listening on LVM2 poll daemon socket. [ 4.362855] systemd[1]: Listening on Process Core Dump Socket. [ 4.491625] vboxdrv: loading out-of-tree module taints kernel. [ 4.497425] vboxdrv: Found 4 processor cores [ 4.497718] vboxdrv: fAsync=1 offMin=0x3ffe0c offMax=0x3ffe0c [ 4.597870] vboxdrv: TSC mode is Asynchronous, tentative frequency 2666359682 Hz [ 4.597872] vboxdrv: Successfully loaded version 5.2.18 (interface 0x00290001) [ 4.728069] VBoxPciLinuxInit [ 4.728076] vboxpci: IOMMU not found (not registered) [ 4.729038] VBoxNetAdp: Successfully started. [ 4.741291] VBoxNetFlt: Successfully started. [ 4.867222] EXT4-fs (sda6): re-mounted. Opts: data=ordered [ 5.038648] systemd-journald[230]: Received request to flush runtime journal from PID 1 [ 6.996829] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 7.059318] rtc_cmos 00:01: RTC can wake from S4 [ 7.059462] rtc_cmos 00:01: registered as rtc0 [ 7.059484] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 7.084062] intel_rng: FWH not detected [ 7.241183] Linux agpgart interface v0.103 [ 7.247558] leds_ss4200: no LED devices found [ 7.349512] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.399 msecs [ 7.349515] perf: interrupt took too long (10922 > 2500), lowering kernel.perf_event_max_sample_rate to 18300 [ 7.378678] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 7.710247] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.710261] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 7.710725] r8169 0000:02:00.0 eth0: RTL8168c/8111c, 00:24:1d:88:3e:cf, XID 3c4000c0, IRQ 24 [ 7.710727] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 8.055754] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 8.055757] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.055759] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.055761] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 8.055762] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0 [ 8.055764] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 8.055766] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 8.055768] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 8.055769] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 8.055771] snd_hda_codec_realtek hdaudioC0D2: CD=0x1c [ 8.055772] snd_hda_codec_realtek hdaudioC0D2: dig-in=0x1f [ 8.076203] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 8.077142] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 8.077206] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 8.078665] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 8.078731] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 8.078794] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 8.078859] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 8.078923] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 8.078984] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 8.154861] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 8.206539] pci 0000:00:00.0: Intel G41 Chipset [ 8.206557] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 8.216980] pci 0000:00:00.0: detected 131072K stolen memory [ 8.217039] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 8.217040] fb: switching to inteldrmfb from VESA VGA [ 8.217075] Console: switching to colour dummy device 80x25 [ 8.217212] [drm] Replacing VGA console driver [ 8.217973] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.217974] [drm] Driver supports precise vblank timestamp query. [ 8.218312] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 8.228877] [drm] RC6 disabled, disabling runtime PM support [ 8.229450] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0 [ 8.283724] fbcon: inteldrmfb (fb0) is primary device [ 8.306022] iTCO_vendor_support: vendor-support=0 [ 8.310676] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 8.310730] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 8.310852] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.313323] Console: switching to colour frame buffer device 170x48 [ 8.335478] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 8.739962] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 8.744729] gpio_ich: GPIO from 462 to 511 on gpio_ich [ 9.003154] hidraw: raw HID events driver (C) Jiri Kosina [ 9.069417] intel_powerclamp: No package C-state available [ 9.111897] intel_powerclamp: No package C-state available [ 9.166605] intel_powerclamp: No package C-state available [ 9.208754] usbcore: registered new interface driver usbhid [ 9.208756] usbhid: USB HID core driver [ 9.220592] Adding 3071996k swap on /dev/sda5. Priority:-2 extents:1 across:3071996k FS [ 9.242296] mousedev: PS/2 mouse device common for all mice [ 9.282872] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:04F2:0403.0001/input/input15 [ 9.336990] hid-generic 0003:04F2:0403.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input0 [ 9.337325] input: Chicony USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/0003:04F2:0403.0002/input/input16 [ 9.395376] input: Chicony USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/0003:04F2:0403.0002/input/input17 [ 9.395490] hid-generic 0003:04F2:0403.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input1 [ 9.760711] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: data=ordered [ 9.926287] fuse init (API version 7.27) [ 11.780610] 8021q: 802.1Q VLAN Support v1.8 [ 11.874096] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.879690] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.879735] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 11.879738] cfg80211: failed to load regulatory.db [ 11.986696] r8169 0000:02:00.0 enp2s0: link down [ 11.986701] r8169 0000:02:00.0 enp2s0: link down [ 11.986763] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 13.585084] r8169 0000:02:00.0 enp2s0: link up [ 13.585089] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 27.705637] audit: type=1006 audit(1538579303.703:2): pid=567 uid=0 old-auid=4294967295 auid=996 tty=(none) old-ses=4294967295 ses=1 res=1 [ 30.811951] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 30.919624] Bridge firewalling registered [ 31.463135] bpfilter: Loaded bpfilter_umh pid 607 [ 31.474313] audit: type=1325 audit(1538579307.473:3): table=filter family=2 entries=0 [ 31.474595] audit: type=1300 audit(1538579307.473:3): arch=c000003e syscall=175 success=yes exit=0 a0=55eb5083b6a0 a1=2308 a2=55eb5028dde6 a3=55eb50837010 items=0 ppid=169 pid=609 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null) [ 31.474778] audit: type=1327 audit(1538579307.473:3): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572 [ 31.893829] audit: type=1325 audit(1538579307.893:4): table=nat family=2 entries=0 [ 31.894172] audit: type=1300 audit(1538579307.893:4): arch=c000003e syscall=175 success=yes exit=0 a0=5575783372a0 a1=21e8 a2=55757739cde6 a3=557578331010 items=0 ppid=169 pid=615 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null) [ 31.894175] audit: type=1327 audit(1538579307.893:4): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F6E6174 [ 31.953485] audit: type=1325 audit(1538579307.953:5): table=nat family=2 entries=5 [ 31.953492] audit: type=1300 audit(1538579307.953:5): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=556e4bdeea50 items=0 ppid=442 pid=641 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null) [ 31.954950] audit: type=1327 audit(1538579307.953:5): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D74006E6174002D4E00444F434B4552 [ 32.059228] Initializing XFRM netlink socket [ 32.271143] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready [ 32.365373] IPv6: ADDRCONF(NETDEV_UP): docker_gwbridge: link is not ready [ 32.686305] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.472 msecs [ 32.713176] kauditd_printk_skb: 129 callbacks suppressed [ 32.713178] audit: type=1325 audit(1538579308.709:49): table=filter family=2 entries=23 [ 32.713184] audit: type=1300 audit(1538579308.709:49): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=564dfb489ca0 items=0 ppid=442 pid=759 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null) [ 32.713187] audit: type=1327 audit(1538579308.709:49): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D740066696C746572002D4900444F434B45522D49534F4C4154494F4E2D53544147452D31002D6900646F636B6572300000002D6F00646F636B657230002D6A00444F434B45522D49534F4C4154494F4E2D53544147452D32 [ 32.717473] audit: type=1325 audit(1538579308.716:50): table=filter family=2 entries=24 [ 32.717478] audit: type=1300 audit(1538579308.716:50): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=56447a56ee10 items=0 ppid=442 pid=761 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null) [ 32.717482] audit: type=1327 audit(1538579308.716:50): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D740066696C746572002D4900444F434B45522D49534F4C4154494F4E2D53544147452D32002D6F00646F636B657230002D6A0044524F50 [ 32.995017] audit: type=1325 audit(1538579308.993:51): table=filter family=2 entries=25 [ 32.995030] audit: type=1300 audit(1538579308.993:51): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=55d14df087f0 items=0 ppid=442 pid=763 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null) [ 32.995034] audit: type=1327 audit(1538579308.993:51): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D740066696C746572002D4E00444F434B45522D55534552 [ 33.001015] audit: type=1325 audit(1538579308.999:52): table=filter family=2 entries=27 [ 36.126703] br0: renamed from ov-001000-ftp5t [ 36.173807] vxlan0: renamed from vx-001000-ftp5t [ 36.188079] br0: port 1(vxlan0) entered blocking state [ 36.188095] br0: port 1(vxlan0) entered disabled state [ 36.188171] device vxlan0 entered promiscuous mode [ 36.188503] br0: port 1(vxlan0) entered blocking state [ 36.188505] br0: port 1(vxlan0) entered forwarding state [ 36.546542] veth0: renamed from vethefeeac4 [ 36.573464] br0: port 2(veth0) entered blocking state [ 36.573475] br0: port 2(veth0) entered disabled state [ 36.573525] device veth0 entered promiscuous mode [ 36.573649] br0: port 2(veth0) entered blocking state [ 36.573651] br0: port 2(veth0) entered forwarding state [ 36.878435] eth0: renamed from vethd6e84ee [ 37.148812] docker_gwbridge: port 1(veth6df52c0) entered blocking state [ 37.148828] docker_gwbridge: port 1(veth6df52c0) entered disabled state [ 37.148914] device veth6df52c0 entered promiscuous mode [ 37.149724] IPv6: ADDRCONF(NETDEV_UP): veth6df52c0: link is not ready [ 37.149748] docker_gwbridge: port 1(veth6df52c0) entered blocking state [ 37.149751] docker_gwbridge: port 1(veth6df52c0) entered forwarding state [ 37.149871] docker_gwbridge: port 1(veth6df52c0) entered disabled state [ 37.672416] eth1: renamed from veth41a2487 [ 37.719844] IPv6: ADDRCONF(NETDEV_CHANGE): veth6df52c0: link becomes ready [ 37.719901] docker_gwbridge: port 1(veth6df52c0) entered blocking state [ 37.719903] docker_gwbridge: port 1(veth6df52c0) entered forwarding state [ 37.719945] IPv6: ADDRCONF(NETDEV_CHANGE): docker_gwbridge: link becomes ready [ 38.188629] kauditd_printk_skb: 49 callbacks suppressed [ 38.188633] audit: type=1325 audit(1538579314.186:70): table=filter family=2 entries=29 [ 38.188644] audit: type=1300 audit(1538579314.186:70): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=555b134024f0 items=0 ppid=442 pid=943 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null) [ 38.188647] audit: type=1327 audit(1538579314.186:70): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D4400464F5257415244002D6A00444F434B45522D55534552 [ 38.191121] audit: type=1325 audit(1538579314.189:71): table=filter family=2 entries=28 [ 38.191125] audit: type=1300 audit(1538579314.189:71): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=564ace7e42e0 items=0 ppid=442 pid=944 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null) [ 38.191128] audit: type=1327 audit(1538579314.189:71): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D4900464F5257415244002D6A00444F434B45522D55534552 [ 43.402885] perf: interrupt took too long (22536 > 13652), lowering kernel.perf_event_max_sample_rate to 8700 [ 128.610009] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 150.659593] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.477 msecs [ 150.659596] perf: interrupt took too long (31007 > 28170), lowering kernel.perf_event_max_sample_rate to 6300 В BIOS award 6 все включил. Да там особо ничего и нет для памяти, кроме регулировки частоты. dmesg \| grep Memory* `[ 0.000000] Memory: 3898760K/4059640K available (10252K kernel code, 1297K rwdata, 3528K rodata, 1488K init, 612K bss, 160880K reserved, 0K cma-reserved) [ 0.206890] x86/mm: Memory block size: 128MB` Перестановки много делал без толку. Процессор обновил недавно, core duo на Xeon X5450(Кстати китайцы переделали этот процессор под сокет LGA775). Думаю причина не может быть в этом.

deidara

# 5 лет, 6 месяцев назад (отредактировано 5 лет, 6 месяцев назад)

Темы: 3

Сообщения: 15

Участник с: 26 октября 2017

To RusWolf
Linux 4.18.3-arch1-1-ARCH x86_64

To vasek
DDR2 800
Этих 4
ссылка на алибабу
Эти стояли старые 2
hynix korea 9 1GB PC2-6400U-666-12, HYMP112U64CP8-S6 AB-C все что написано. Вроде они 800 МГц ссылка на ибэй

На самом деле 1Гб планок у меня много, есть самсунги, кингстон и еще пара тройка планок непопулярных фирм, они тоже в связке не работают. Все DDR2 800 МГц dimm.

В общем дело такое, мать я менял и она довольно новая, но как оказалось старого производства. Ссылка на спецификацию
А вот че интересно, там красными буквами написано:

* Do not populate both DIMM sockets of the same channel (e.g. DDR and DDR2), or populate 4 DIMM sockets with double-sided memory modules to prevent system's failure to start or incorrect detection of memory modules. Please refer to the user manual for the memory configurations table.

Т.е. 4 модуля Dimm не работают одновременно, или только черные чипы памяти должны быть на двух сторонах обязательно. Так или иначе 4 не работают. Раньше тоже не мог его заставить работать 4 1Гб модули, получаются они все dimm, но чипы у 1Гб не у всех на друх сторонах. Конкретно у hynixов только на одной стороне, вот поэтому я их и пытался заставить работать.

Мне хотя бы 3 заставить работать. 3 по 2ГБ. Оказывается в Windows 10, работают только 2x2Гб + 2x1Гб планки, а вот 3x2Гб нет(системная ошибка, перезагрузка).
Т.е. все 4 стола рабочие, я это всегда знал, по одному проверял. В linux тоже хоть в любую засовывай по 1 и запускай нормально, хоть 1 ГБ хоть 2 ГБ.

sudo lshw -short -C memory | grep MHz

/0/19/0                           memory      2GiB DIMM 800 MHz (1.2 ns)
/0/19/1                           memory      1GiB DIMM 800 MHz (1.2 ns)
/0/19/2                           memory      2GiB DIMM 800 MHz (1.2 ns)
/0/19/3                           memory      1GiB DIMM 800 MHz (1.2 ns)

dmesg

[    0.000000] Linux version 4.18.3-arch1-1-ARCH (builduser@heftig-24267) (gcc version 8.2.0 (GCC)) #1 SMP PREEMPT Sat Aug 18 09:22:54 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1ece481f-9aa9-42a1-aa39-5c41a6283373 rw quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7cdffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b7ce0000-0x00000000b7ce2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b7ce3000-0x00000000b7ceffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b7cf0000-0x00000000b7cfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CBFFF write-protect
[    0.000000]   CC000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 0F00000000 write-back
[    0.000000]   1 base 00C0000000 mask 0FC0000000 uncachable
[    0.000000]   2 base 00B8000000 mask 0FF8000000 uncachable
[    0.000000]   3 base 00B7E00000 mask 0FFFE00000 uncachable
[    0.000000]   4 base 0100000000 mask 0FC0000000 write-back
[    0.000000]   5 base 00B7D00000 mask 0FFFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[    0.000000] total RAM covered: 3965M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 256M 	num_reg: 6  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xb7d00000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xb7ce0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f5760-0x000f576f] mapped at [(____ptrval____)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[    0.000000] BRK [0x8b076000, 0x8b076fff] PGTABLE
[    0.000000] BRK [0x8b077000, 0x8b077fff] PGTABLE
[    0.000000] BRK [0x8b078000, 0x8b078fff] PGTABLE
[    0.000000] BRK [0x8b079000, 0x8b079fff] PGTABLE
[    0.000000] BRK [0x8b07a000, 0x8b07afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3714d000-0x3789dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7150 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000B7CE3040 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000B7CE30C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000B7CE3180 003DE7 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x00000000B7CE0000 000040
[    0.000000] ACPI: HPET 0x00000000B7CE70C0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000B7CE7140 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: TAMG 0x00000000B7CE7180 006442 (v01 GBT    GBT   B0 5455312E BG?? 00020101)
[    0.000000] ACPI: APIC 0x00000000B7CE6FC0 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 0x00000000B7CEDEF0 0003AB (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffcfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b7cdffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff]
[    0.000000] Reserved but unavailable: 898 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1014910
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11700 pages used for memmap
[    0.000000]   DMA32 zone: 748768 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xb8000000-0xbfffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7ce0000-0xb7ce2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7ce3000-0xb7ceffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7cf0000-0xb7cfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb7d00000-0xb7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb8000000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] [mem 0xd0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999029
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1ece481f-9aa9-42a1-aa39-5c41a6283373 rw quiet
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3898760K/4059640K available (10252K kernel code, 1297K rwdata, 3528K rodata, 1488K init, 612K bss, 160880K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 33392 entries in 131 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x95, should be 0xC6 (20180531/tbprint-177)
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 2666.151 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x266e5651bbd, max_idle_ns: 440795206380 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5334.48 BogoMIPS (lpj=8887170)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.019999] Security Framework initialized
[    0.019999] Yama: becoming mindful.
[    0.019999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.019999] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.019999] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019999] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019999] mce: CPU supports 6 MCE banks
[    0.019999] CPU0: Thermal monitoring enabled (TM2)
[    0.019999] process: using mwait in idle threads
[    0.019999] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.019999] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.019999] Spectre V2 : Mitigation: Full generic retpoline
[    0.019999] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.019999] Speculative Store Bypass: Vulnerable
[    0.019999] Freeing SMP alternatives memory: 28K
[    0.029999] smpboot: CPU0: Intel(R) Xeon(R) CPU           X5450  @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0x6)
[    0.046680] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.046690] ... version:                2
[    0.046692] ... bit width:              40
[    0.046692] ... generic registers:      2
[    0.046694] ... value mask:             000000ffffffffff
[    0.046695] ... max period:             000000007fffffff
[    0.046696] ... fixed-purpose events:   3
[    0.046697] ... event mask:             0000000700000003
[    0.053338] Hierarchical SRCU implementation.
[    0.073502] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.080005] smp: Bringing up secondary CPUs ...
[    0.120021] x86: Booting SMP configuration:
[    0.120023] .... node  #0, CPUs:      #1
[    0.122894] TSC synchronization [CPU#0 -> CPU#1]:
[    0.122895] Measured 4195652 cycles TSC warp between CPUs, turning off TSC clock.
[    0.122896] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.160018]  #2 #3
[    0.200898] smp: Brought up 1 node, 4 CPUs
[    0.200898] smpboot: Max logical packages: 1
[    0.200898] smpboot: Total of 4 processors activated (21337.92 BogoMIPS)
[    0.206890] devtmpfs: initialized
[    0.206890] x86/mm: Memory block size: 128MB
[    0.207248] PM: Registering ACPI NVS region [mem 0xb7ce0000-0xb7ce2fff] (12288 bytes)
[    0.207248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.207248] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.207248] pinctrl core: initialized pinctrl subsystem
[    0.207248] RTC time: 15:07:57, date: 10/03/18
[    0.207248] NET: Registered protocol family 16
[    0.207248] audit: initializing netlink subsys (disabled)
[    0.207248] audit: type=2000 audit(1538579276.206:1): state=initialized audit_enabled=0 res=1
[    0.207248] cpuidle: using governor ladder
[    0.207248] cpuidle: using governor menu
[    0.207248] ACPI: bus type PCI registered
[    0.207248] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.207248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[    0.207248] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[    0.207248] PCI: Using configuration type 1 for base access
[    0.210050] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.210135] ACPI: Added _OSI(Module Device)
[    0.210136] ACPI: Added _OSI(Processor Device)
[    0.210137] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.210138] ACPI: Added _OSI(Processor Aggregator Device)
[    0.210139] ACPI: Added _OSI(Linux-Dell-Video)
[    0.213715] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.216335] ACPI: Dynamic OEM Table Load:
[    0.216342] ACPI: SSDT 0xFFFF9CFC7AA73C00 00022A (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.216618] ACPI: Dynamic OEM Table Load:
[    0.216622] ACPI: SSDT 0xFFFF9CFC7AAF8000 000152 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.216866] ACPI: Dynamic OEM Table Load:
[    0.216870] ACPI: SSDT 0xFFFF9CFC7AAF9200 000152 (v01 PmRef  Cpu2Ist  00003000 INTL 20040311)
[    0.217096] ACPI: Dynamic OEM Table Load:
[    0.217100] ACPI: SSDT 0xFFFF9CFC7AAF9A00 000152 (v01 PmRef  Cpu3Ist  00003000 INTL 20040311)
[    0.217483] ACPI: Interpreter enabled
[    0.217503] ACPI: (supports S0 S3 S4 S5)
[    0.217505] ACPI: Using IOAPIC for interrupt routing
[    0.217530] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.217697] ACPI: Enabled 10 GPEs in block 00 to 1F
[    0.223056] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.223062] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.223067] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.223374] PCI host bridge to bus 0000:00
[    0.223376] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.223378] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.223380] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.223381] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.223383] pci_bus 0000:00: root bus resource [mem 0xb7d00000-0xfebfffff window]
[    0.223385] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.223394] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[    0.223416] DMAR: Forcing write-buffer flush capability
[    0.223417] DMAR: Disabling IOMMU for graphics on this chipset
[    0.223517] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
[    0.223528] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[    0.223534] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.223538] pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe007]
[    0.223647] pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000
[    0.223657] pci 0000:00:02.1: reg 0x10: [mem 0xe1400000-0xe14fffff 64bit]
[    0.223793] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.223811] pci 0000:00:1b.0: reg 0x10: [mem 0xe1700000-0xe1703fff 64bit]
[    0.223874] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.223985] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.224052] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.224162] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.224229] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.224340] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.224377] pci 0000:00:1d.0: reg 0x20: [io  0xe100-0xe11f]
[    0.224489] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.224526] pci 0000:00:1d.1: reg 0x20: [io  0xe200-0xe21f]
[    0.224638] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.224674] pci 0000:00:1d.2: reg 0x20: [io  0xe300-0xe31f]
[    0.224787] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.224823] pci 0000:00:1d.3: reg 0x20: [io  0xe400-0xe41f]
[    0.224939] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.224956] pci 0000:00:1d.7: reg 0x10: [mem 0xe1704000-0xe17043ff]
[    0.225115] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.225256] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.225331] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.225335] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.225338] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.225341] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.225455] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x010180
[    0.225469] pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
[    0.225476] pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
[    0.225482] pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
[    0.225488] pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
[    0.225495] pci 0000:00:1f.2: reg 0x20: [io  0xf000-0xf00f]
[    0.225508] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.225510] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.225511] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.225513] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.225532] pci 0000:00:1f.2: PME# supported from D3hot
[    0.225628] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.225677] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.225825] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.225883] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.225909] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.225934] pci 0000:02:00.0: reg 0x18: [mem 0xe1510000-0xe1510fff 64bit pref]
[    0.225950] pci 0000:02:00.0: reg 0x20: [mem 0xe1500000-0xe150ffff 64bit pref]
[    0.225961] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.226037] pci 0000:02:00.0: supports D1 D2
[    0.226039] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.226129] pci 0000:00:1c.1: ASPM: current common clock configuration is broken, reconfiguring
[    0.233357] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.233361] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.233365] pci 0000:00:1c.1:   bridge window [mem 0xe0000000-0xe0ffffff]
[    0.233370] pci 0000:00:1c.1:   bridge window [mem 0xe1500000-0xe15fffff 64bit pref]
[    0.233388] pci_bus 0000:03: extended config space not accessible
[    0.233428] pci 0000:03:07.0: [104c:8024] type 00 class 0x0c0010
[    0.233445] pci 0000:03:07.0: reg 0x10: [mem 0xe1604000-0xe16047ff]
[    0.233455] pci 0000:03:07.0: reg 0x14: [mem 0xe1600000-0xe1603fff]
[    0.233526] pci 0000:03:07.0: supports D1 D2
[    0.233527] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot
[    0.233596] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.233600] pci 0000:00:1e.0:   bridge window [mem 0xe1600000-0xe16fffff]
[    0.233605] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.233607] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.233608] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.233610] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.233611] pci 0000:00:1e.0:   bridge window [mem 0xb7d00000-0xfebfffff window] (subtractive decode)
[    0.234223] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.234318] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.234407] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.234497] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.234586] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.234675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.234764] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.234855] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.235037] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.235037] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.235037] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.235037] vgaarb: loaded
[    0.235037] pps_core: LinuxPPS API ver. 1 registered
[    0.235037] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.235037] PTP clock support registered
[    0.235037] EDAC MC: Ver: 3.0.0
[    0.235037] PCI: Using ACPI for IRQ routing
[    0.240600] PCI: pci_cache_line_size set to 64 bytes
[    0.240635] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.240636] e820: reserve RAM buffer [mem 0xb7ce0000-0xb7ffffff]
[    0.240748] NetLabel: Initializing
[    0.240749] NetLabel:  domain hash size = 128
[    0.240750] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.240767] NetLabel:  unlabeled traffic allowed by default
[    0.240772] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.240772] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.240772] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.243371] clocksource: Switched to clocksource hpet
[    0.258551] VFS: Disk quotas dquot_6.6.0
[    0.258572] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.258668] pnp: PnP ACPI init
[    0.258912] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.258914] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.258916] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.258918] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.258920] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.258927] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.259035] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.259222] pnp 00:02: [dma 2]
[    0.259254] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.259534] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.259626] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.259741] system 00:05: [io  0x0400-0x04cf] could not be reserved
[    0.259746] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.260034] system 00:06: [mem 0xc0000000-0xcfffffff] has been reserved
[    0.260039] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.260308] system 00:07: [mem 0x000cc600-0x000cffff] has been reserved
[    0.260310] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.260312] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.260314] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.260316] system 00:07: [mem 0xb7ce0000-0xb7cfffff] could not be reserved
[    0.260318] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.260320] system 00:07: [mem 0x00100000-0xb7cdffff] could not be reserved
[    0.260322] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.260324] system 00:07: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.260326] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.260327] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.260329] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.260331] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[    0.260333] system 00:07: [mem 0x000e0000-0x000effff] has been reserved
[    0.260338] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.260345] pnp: PnP ACPI: found 8 devices
[    0.266907] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.266921] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.266925] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.266927] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.266945] pci 0000:00:1c.0: BAR 14: assigned [mem 0xb7d00000-0xb7efffff]
[    0.266949] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe1800000-0xe19fffff 64bit pref]
[    0.266952] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.266955] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.266957] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.266961] pci 0000:00:1c.0:   bridge window [mem 0xb7d00000-0xb7efffff]
[    0.266964] pci 0000:00:1c.0:   bridge window [mem 0xe1800000-0xe19fffff 64bit pref]
[    0.266970] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref]
[    0.266972] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.266974] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.266978] pci 0000:00:1c.1:   bridge window [mem 0xe0000000-0xe0ffffff]
[    0.266981] pci 0000:00:1c.1:   bridge window [mem 0xe1500000-0xe15fffff 64bit pref]
[    0.266986] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.266990] pci 0000:00:1e.0:   bridge window [mem 0xe1600000-0xe16fffff]
[    0.266996] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.266998] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.266999] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.267001] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.267003] pci_bus 0000:00: resource 8 [mem 0xb7d00000-0xfebfffff window]
[    0.267004] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.267006] pci_bus 0000:01: resource 1 [mem 0xb7d00000-0xb7efffff]
[    0.267007] pci_bus 0000:01: resource 2 [mem 0xe1800000-0xe19fffff 64bit pref]
[    0.267009] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.267010] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe0ffffff]
[    0.267012] pci_bus 0000:02: resource 2 [mem 0xe1500000-0xe15fffff 64bit pref]
[    0.267014] pci_bus 0000:03: resource 1 [mem 0xe1600000-0xe16fffff]
[    0.267015] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.267017] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.267019] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.267020] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.267022] pci_bus 0000:03: resource 8 [mem 0xb7d00000-0xfebfffff window]
[    0.267106] NET: Registered protocol family 2
[    0.267309] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.267348] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.267462] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.267645] TCP: Hash tables configured (established 32768 bind 32768)
[    0.267695] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.267723] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.267790] NET: Registered protocol family 1
[    0.267795] NET: Registered protocol family 44
[    0.267805] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.283466] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x6c6 took 14641 usecs
[    0.283489] PCI: CLS 32 bytes, default 64
[    0.283529] Unpacking initramfs...
[    0.401268] Freeing initrd memory: 7492K
[    0.401273] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.401276] software IO TLB [mem 0xb3ce0000-0xb7ce0000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.401526] Scanning for low memory corruption every 60 seconds
[    0.402205] Initialise system trusted keyrings
[    0.402219] Key type blacklist registered
[    0.402298] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[    0.403888] zbud: loaded
[    0.404193] pstore: using lz4hc compression
[    0.406843] Key type asymmetric registered
[    0.406845] Asymmetric key parser 'x509' registered
[    0.406883] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.406942] io scheduler noop registered
[    0.406943] io scheduler deadline registered
[    0.406994] io scheduler cfq registered (default)
[    0.406995] io scheduler mq-deadline registered
[    0.406996] io scheduler kyber registered
[    0.407023] io scheduler bfq registered
[    0.407577] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.407655] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.407656] vesafb: scrolling: redraw
[    0.407658] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.407672] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
[    0.431605] Console: switching to colour frame buffer device 128x48
[    0.455418] fb0: VESA VGA frame buffer device
[    0.455434] intel_idle: does not run on family 6 model 23
[    0.455483] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.455493] ACPI: Power Button [PWRB]
[    0.455558] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.455573] ACPI: Power Button [PWRF]
[    0.456223] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.476794] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.478077] ledtrig-cpu: registered to indicate activity on CPUs
[    0.478336] NET: Registered protocol family 10
[    0.482796] Segment Routing with IPv6
[    0.482815] NET: Registered protocol family 17
[    0.483103] RAS: Correctable Errors collector initialized.
[    0.483137] microcode: sig=0x10676, pf=0x40, revision=0x0
[    0.483208] microcode: Microcode Update Driver: v2.2.
[    0.483361] registered taskstats version 1
[    0.483369] Loading compiled-in X.509 certificates
[    0.483385] zswap: loaded using pool lzo/zbud
[    0.487136] Key type big_key registered
[    0.487458]   Magic number: 6:903:132
[    0.487501] acpi device:07: hash matches
[    0.487520] hctosys: unable to open rtc device (rtc0)
[    0.487639] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    0.490038] Freeing unused kernel memory: 1488K
[    0.490040] Write protecting the kernel read-only data: 16384k
[    0.490799] Freeing unused kernel memory: 2016K
[    0.492235] Freeing unused kernel memory: 568K
[    0.574083] ACPI: bus type USB registered
[    0.574116] usbcore: registered new interface driver usbfs
[    0.574131] usbcore: registered new interface driver hub
[    0.574175] usbcore: registered new device driver usb
[    0.575653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.575869] ehci-pci: EHCI PCI platform driver
[    0.576130] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.576137] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.579473] Floppy drive(s): fd0 is 1.44M
[    0.579727] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[    0.579729] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.580052] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.580070] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe1704000
[    0.580468] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.580516] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.586501] SCSI subsystem initialized
[    0.590952] libata version 3.00 loaded.
[    0.591353] ata_piix 0000:00:1f.2: version 2.13
[    0.591501] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.592441] scsi host0: ata_piix
[    0.592738] scsi host1: ata_piix
[    0.592780] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.592781] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.596705] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.596761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.596763] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.596765] usb usb1: Product: EHCI Host Controller
[    0.596766] usb usb1: Manufacturer: Linux 4.18.3-arch1-1-ARCH ehci_hcd
[    0.596768] usb usb1: SerialNumber: 0000:00:1d.7
[    0.596899] hub 1-0:1.0: USB hub found
[    0.596907] hub 1-0:1.0: 8 ports detected
[    0.597935] uhci_hcd: USB Universal Host Controller Interface driver
[    0.598053] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.598059] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.598066] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.598085] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100
[    0.598136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    0.598138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.598140] usb usb2: Product: UHCI Host Controller
[    0.598143] usb usb2: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd
[    0.598145] usb usb2: SerialNumber: 0000:00:1d.0
[    0.598251] hub 2-0:1.0: USB hub found
[    0.598258] hub 2-0:1.0: 2 ports detected
[    0.598453] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.598458] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.598466] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.598493] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200
[    0.598540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    0.598542] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.598543] usb usb3: Product: UHCI Host Controller
[    0.598545] usb usb3: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd
[    0.598546] usb usb3: SerialNumber: 0000:00:1d.1
[    0.598658] hub 3-0:1.0: USB hub found
[    0.598664] hub 3-0:1.0: 2 ports detected
[    0.598867] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.598872] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.598878] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.598901] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300
[    0.598949] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    0.598951] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.598953] usb usb4: Product: UHCI Host Controller
[    0.598954] usb usb4: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd
[    0.598956] usb usb4: SerialNumber: 0000:00:1d.2
[    0.599072] hub 4-0:1.0: USB hub found
[    0.599078] hub 4-0:1.0: 2 ports detected
[    0.599283] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.599288] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.599297] uhci_hcd 0000:00:1d.3: detected 2 ports
[    0.599331] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
[    0.599385] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    0.599387] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.599389] usb usb5: Product: UHCI Host Controller
[    0.599390] usb usb5: Manufacturer: Linux 4.18.3-arch1-1-ARCH uhci_hcd
[    0.599392] usb usb5: SerialNumber: 0000:00:1d.3
[    0.599505] hub 5-0:1.0: USB hub found
[    0.599512] hub 5-0:1.0: 2 ports detected
[    0.600527] FDC 0 is a post-1991 82077
[    0.646719] firewire_ohci 0000:03:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    0.771156] ata1.01: HPA detected: current 976771055, native 976773168
[    0.771160] ata1.01: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
[    0.771162] ata1.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.776001] scsi 0:0:1:0: Direct-Access     ATA      TOSHIBA DT01ACA0 A750 PQ: 0 ANSI: 5
[    0.778966] sd 0:0:1:0: [sda] 976771055 512-byte logical blocks: (500 GB/466 GiB)
[    0.778968] sd 0:0:1:0: [sda] 4096-byte physical blocks
[    0.778989] sd 0:0:1:0: [sda] Write Protect is off
[    0.778991] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    0.779030] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.836951]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[    0.837802] sd 0:0:1:0: [sda] Attached SCSI disk
[    0.926683] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.170125] firewire_core 0000:03:07.0: created device fw0: GUID 00488c0e0000241d, S400
[    1.607744] usb 1-1: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95
[    1.607748] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.607750] usb 1-1: Product: USB2.0-CRW
[    1.607752] usb 1-1: Manufacturer: Generic
[    1.607754] usb 1-1: SerialNumber: 20060413092100000
[    1.611189] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.611389] scsi host2: usb-storage 1-1:1.0
[    1.611485] usbcore: registered new interface driver usb-storage
[    1.612011] usbcore: registered new interface driver uas
[    1.851845] random: fast init done
[    1.863368] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[    2.110413] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    2.349378] usb 5-2: New USB device found, idVendor=04f2, idProduct=0403, bcdDevice= 1.44
[    2.349382] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.349384] usb 5-2: Product: USB Keyboard
[    2.349386] usb 5-2: Manufacturer: Chicony
[    2.643294] scsi 2:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    2.649650] scsi 2:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    2.656024] scsi 2:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    2.662400] scsi 2:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    2.669628] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    2.670384] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[    2.671128] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[    2.671878] sd 2:0:0:3: [sde] Attached SCSI removable disk
[    3.216595] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    3.233469] systemd[1]: Detected architecture x86-64.
[    3.250530] systemd[1]: Set hostname to <shgr-mashina>.
[    3.373547] random: crng init done
[    4.353493] systemd[1]: Created slice system-getty.slice.
[    4.353646] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.353754] systemd[1]: Listening on Journal Socket.
[    4.353820] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.353890] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.358411] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.362855] systemd[1]: Listening on Process Core Dump Socket.
[    4.491625] vboxdrv: loading out-of-tree module taints kernel.
[    4.497425] vboxdrv: Found 4 processor cores
[    4.497718] vboxdrv: fAsync=1 offMin=0x3ffe0c offMax=0x3ffe0c
[    4.597870] vboxdrv: TSC mode is Asynchronous, tentative frequency 2666359682 Hz
[    4.597872] vboxdrv: Successfully loaded version 5.2.18 (interface 0x00290001)
[    4.728069] VBoxPciLinuxInit
[    4.728076] vboxpci: IOMMU not found (not registered)
[    4.729038] VBoxNetAdp: Successfully started.
[    4.741291] VBoxNetFlt: Successfully started.
[    4.867222] EXT4-fs (sda6): re-mounted. Opts: data=ordered
[    5.038648] systemd-journald[230]: Received request to flush runtime journal from PID 1
[    6.996829] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    7.059318] rtc_cmos 00:01: RTC can wake from S4
[    7.059462] rtc_cmos 00:01: registered as rtc0
[    7.059484] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    7.084062] intel_rng: FWH not detected
[    7.241183] Linux agpgart interface v0.103
[    7.247558] leds_ss4200: no LED devices found
[    7.349512] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.399 msecs
[    7.349515] perf: interrupt took too long (10922 > 2500), lowering kernel.perf_event_max_sample_rate to 18300
[    7.378678] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    7.710247] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    7.710261] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    7.710725] r8169 0000:02:00.0 eth0: RTL8168c/8111c, 00:24:1d:88:3e:cf, XID 3c4000c0, IRQ 24
[    7.710727] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    8.055754] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    8.055757] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.055759] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.055761] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    8.055762] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[    8.055764] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    8.055766] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    8.055768] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    8.055769] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    8.055771] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[    8.055772] snd_hda_codec_realtek hdaudioC0D2:    dig-in=0x1f
[    8.076203] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    8.077142] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    8.077206] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.078665] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.078731] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.078794] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.078859] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    8.078923] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    8.078984] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    8.154861] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    8.206539] pci 0000:00:00.0: Intel G41 Chipset
[    8.206557] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    8.216980] pci 0000:00:00.0: detected 131072K stolen memory
[    8.217039] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    8.217040] fb: switching to inteldrmfb from VESA VGA
[    8.217075] Console: switching to colour dummy device 80x25
[    8.217212] [drm] Replacing VGA console driver
[    8.217973] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.217974] [drm] Driver supports precise vblank timestamp query.
[    8.218312] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.228877] [drm] RC6 disabled, disabling runtime PM support
[    8.229450] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    8.283724] fbcon: inteldrmfb (fb0) is primary device
[    8.306022] iTCO_vendor_support: vendor-support=0
[    8.310676] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.310730] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[    8.310852] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.313323] Console: switching to colour frame buffer device 170x48
[    8.335478] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.739962] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    8.744729] gpio_ich: GPIO from 462 to 511 on gpio_ich
[    9.003154] hidraw: raw HID events driver (C) Jiri Kosina
[    9.069417] intel_powerclamp: No package C-state available
[    9.111897] intel_powerclamp: No package C-state available
[    9.166605] intel_powerclamp: No package C-state available
[    9.208754] usbcore: registered new interface driver usbhid
[    9.208756] usbhid: USB HID core driver
[    9.220592] Adding 3071996k swap on /dev/sda5.  Priority:-2 extents:1 across:3071996k FS
[    9.242296] mousedev: PS/2 mouse device common for all mice
[    9.282872] input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:04F2:0403.0001/input/input15
[    9.336990] hid-generic 0003:04F2:0403.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input0
[    9.337325] input: Chicony USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/0003:04F2:0403.0002/input/input16
[    9.395376] input: Chicony USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/0003:04F2:0403.0002/input/input17
[    9.395490] hid-generic 0003:04F2:0403.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input1
[    9.760711] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: data=ordered
[    9.926287] fuse init (API version 7.27)
[   11.780610] 8021q: 802.1Q VLAN Support v1.8
[   11.874096] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   11.879690] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   11.879735] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   11.879738] cfg80211: failed to load regulatory.db
[   11.986696] r8169 0000:02:00.0 enp2s0: link down
[   11.986701] r8169 0000:02:00.0 enp2s0: link down
[   11.986763] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   13.585084] r8169 0000:02:00.0 enp2s0: link up
[   13.585089] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   27.705637] audit: type=1006 audit(1538579303.703:2): pid=567 uid=0 old-auid=4294967295 auid=996 tty=(none) old-ses=4294967295 ses=1 res=1
[   30.811951] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   30.919624] Bridge firewalling registered
[   31.463135] bpfilter: Loaded bpfilter_umh pid 607
[   31.474313] audit: type=1325 audit(1538579307.473:3): table=filter family=2 entries=0
[   31.474595] audit: type=1300 audit(1538579307.473:3): arch=c000003e syscall=175 success=yes exit=0 a0=55eb5083b6a0 a1=2308 a2=55eb5028dde6 a3=55eb50837010 items=0 ppid=169 pid=609 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
[   31.474778] audit: type=1327 audit(1538579307.473:3): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F66696C746572
[   31.893829] audit: type=1325 audit(1538579307.893:4): table=nat family=2 entries=0
[   31.894172] audit: type=1300 audit(1538579307.893:4): arch=c000003e syscall=175 success=yes exit=0 a0=5575783372a0 a1=21e8 a2=55757739cde6 a3=557578331010 items=0 ppid=169 pid=615 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/usr/bin/kmod" key=(null)
[   31.894175] audit: type=1327 audit(1538579307.893:4): proctitle=2F7362696E2F6D6F6470726F6265002D71002D2D0069707461626C655F6E6174
[   31.953485] audit: type=1325 audit(1538579307.953:5): table=nat family=2 entries=5
[   31.953492] audit: type=1300 audit(1538579307.953:5): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=556e4bdeea50 items=0 ppid=442 pid=641 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[   31.954950] audit: type=1327 audit(1538579307.953:5): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D74006E6174002D4E00444F434B4552
[   32.059228] Initializing XFRM netlink socket
[   32.271143] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   32.365373] IPv6: ADDRCONF(NETDEV_UP): docker_gwbridge: link is not ready
[   32.686305] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.472 msecs
[   32.713176] kauditd_printk_skb: 129 callbacks suppressed
[   32.713178] audit: type=1325 audit(1538579308.709:49): table=filter family=2 entries=23
[   32.713184] audit: type=1300 audit(1538579308.709:49): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=564dfb489ca0 items=0 ppid=442 pid=759 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[   32.713187] audit: type=1327 audit(1538579308.709:49): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D740066696C746572002D4900444F434B45522D49534F4C4154494F4E2D53544147452D31002D6900646F636B6572300000002D6F00646F636B657230002D6A00444F434B45522D49534F4C4154494F4E2D53544147452D32
[   32.717473] audit: type=1325 audit(1538579308.716:50): table=filter family=2 entries=24
[   32.717478] audit: type=1300 audit(1538579308.716:50): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=56447a56ee10 items=0 ppid=442 pid=761 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[   32.717482] audit: type=1327 audit(1538579308.716:50): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D740066696C746572002D4900444F434B45522D49534F4C4154494F4E2D53544147452D32002D6F00646F636B657230002D6A0044524F50
[   32.995017] audit: type=1325 audit(1538579308.993:51): table=filter family=2 entries=25
[   32.995030] audit: type=1300 audit(1538579308.993:51): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=55d14df087f0 items=0 ppid=442 pid=763 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[   32.995034] audit: type=1327 audit(1538579308.993:51): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D740066696C746572002D4E00444F434B45522D55534552
[   33.001015] audit: type=1325 audit(1538579308.999:52): table=filter family=2 entries=27
[   36.126703] br0: renamed from ov-001000-ftp5t
[   36.173807] vxlan0: renamed from vx-001000-ftp5t
[   36.188079] br0: port 1(vxlan0) entered blocking state
[   36.188095] br0: port 1(vxlan0) entered disabled state
[   36.188171] device vxlan0 entered promiscuous mode
[   36.188503] br0: port 1(vxlan0) entered blocking state
[   36.188505] br0: port 1(vxlan0) entered forwarding state
[   36.546542] veth0: renamed from vethefeeac4
[   36.573464] br0: port 2(veth0) entered blocking state
[   36.573475] br0: port 2(veth0) entered disabled state
[   36.573525] device veth0 entered promiscuous mode
[   36.573649] br0: port 2(veth0) entered blocking state
[   36.573651] br0: port 2(veth0) entered forwarding state
[   36.878435] eth0: renamed from vethd6e84ee
[   37.148812] docker_gwbridge: port 1(veth6df52c0) entered blocking state
[   37.148828] docker_gwbridge: port 1(veth6df52c0) entered disabled state
[   37.148914] device veth6df52c0 entered promiscuous mode
[   37.149724] IPv6: ADDRCONF(NETDEV_UP): veth6df52c0: link is not ready
[   37.149748] docker_gwbridge: port 1(veth6df52c0) entered blocking state
[   37.149751] docker_gwbridge: port 1(veth6df52c0) entered forwarding state
[   37.149871] docker_gwbridge: port 1(veth6df52c0) entered disabled state
[   37.672416] eth1: renamed from veth41a2487
[   37.719844] IPv6: ADDRCONF(NETDEV_CHANGE): veth6df52c0: link becomes ready
[   37.719901] docker_gwbridge: port 1(veth6df52c0) entered blocking state
[   37.719903] docker_gwbridge: port 1(veth6df52c0) entered forwarding state
[   37.719945] IPv6: ADDRCONF(NETDEV_CHANGE): docker_gwbridge: link becomes ready
[   38.188629] kauditd_printk_skb: 49 callbacks suppressed
[   38.188633] audit: type=1325 audit(1538579314.186:70): table=filter family=2 entries=29
[   38.188644] audit: type=1300 audit(1538579314.186:70): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=555b134024f0 items=0 ppid=442 pid=943 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[   38.188647] audit: type=1327 audit(1538579314.186:70): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D4400464F5257415244002D6A00444F434B45522D55534552
[   38.191121] audit: type=1325 audit(1538579314.189:71): table=filter family=2 entries=28
[   38.191125] audit: type=1300 audit(1538579314.189:71): arch=c000003e syscall=54 success=yes exit=0 a0=4 a1=0 a2=40 a3=564ace7e42e0 items=0 ppid=442 pid=944 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables" exe="/usr/bin/xtables-multi" key=(null)
[   38.191128] audit: type=1327 audit(1538579314.189:71): proctitle=2F7573722F62696E2F69707461626C6573002D2D77616974002D4900464F5257415244002D6A00444F434B45522D55534552
[   43.402885] perf: interrupt took too long (22536 > 13652), lowering kernel.perf_event_max_sample_rate to 8700
[  128.610009] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[  150.659593] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.477 msecs
[  150.659596] perf: interrupt took too long (31007 > 28170), lowering kernel.perf_event_max_sample_rate to 6300

В BIOS award 6 все включил. Да там особо ничего и нет для памяти, кроме регулировки частоты.

dmesg | grep Memory

[    0.000000] Memory: 3898760K/4059640K available (10252K kernel code, 1297K rwdata, 3528K rodata, 1488K init, 612K bss, 160880K reserved, 0K cma-reserved)
[    0.206890] x86/mm: Memory block size: 128MB

Перестановки много делал без толку.

Процессор обновил недавно, core duo на Xeon X5450(Кстати китайцы переделали этот процессор под сокет LGA775). Думаю причина не может быть в этом.

redix	# 5 лет, 6 месяцев назад
Темы: 34 Сообщения: 3432 Участник с: 11 марта 2013	deidara Мне хотя бы 3 заставить работать Спецификация вашего чипсета G41 не предусматривает работу трех модулей памяти, неужели не понятно? https://3dnews.ru/556615 In Tux We Trust