frostu-kun |
|
Темы:
1
Сообщения:
6
Участник с: 19 ноября 2011
|
Доброго времени суток! Появилась проблема после перезагрузки с винды на арч. Во время fsck home раздела при загрузке повисает. systemd-fsck[205]: /dev/sdb2: clean, xxx/yyy files, xxx/yyy blocks Пробовал скипнуть fsck, проблема осталась. |
lampslave |
|
Темы:
32
Сообщения:
4801
Участник с: 05 июля 2011
|
Ну как бы проблема говорит сама за себя. Попробуйте проверить с livecd и smart винта посмотрите. |
frostu-kun |
|
Темы:
1
Сообщения:
6
Участник с: 19 ноября 2011
|
lampslaveЗапускался с убунты, home абсолютно жив, проверил его Gpartedом, все в порядке. Что такое smart? |
lampslave |
|
Темы:
32
Сообщения:
4801
Участник с: 05 июля 2011
|
Я что-то не слышал, чтобы gparted умел проверять файловую систему. Попробуйте загрузиться ещё раз и проверить fsck. Не уверен, что smartctl есть на livecd с Убунтой, но всё же интересно было бы посмотреть, что выдаст smartctl -a /dev/sdb |
frostu-kun |
|
Темы:
1
Сообщения:
6
Участник с: 19 ноября 2011
|
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11.2-1-ARCH] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Fujitsu MHW BH Device Model: FUJITSU MHW2160BH Serial Number: K10BT7A2A128 LU WWN Device Id: 5 00000e 0410203b2 Firmware Version: 0085001C User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 3b SATA Version is: SATA 2.5, 1.5 Gb/s Local Time is: Fri Oct 18 21:40:23 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 649) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 92) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 19809 2 Throughput_Performance 0x0004 100 100 000 Old_age Offline - 39583744 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 3817 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 0 (2000 0) 7 Seek_Error_Rate 0x000e 100 100 000 Old_age Always - 2494 8 Seek_Time_Performance 0x0004 100 100 000 Old_age Offline - 0 9 Power_On_Hours 0x0032 059 059 000 Old_age Always - 20752 10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3115 191 G-Sense_Error_Rate 0x0012 100 100 000 Old_age Always - 770 192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 534 194 Temperature_Celsius 0x0022 100 085 000 Old_age Always - 37 (Min/Max 7/63) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 (0 7000) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000e 100 100 000 Old_age Always - 10019 201 Soft_Read_Error_Rate 0x0010 100 100 000 Old_age Offline - 0 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 1529122583188 225 Load_Cycle_Count 0x0032 085 085 000 Old_age Always - 313875 240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 76 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 76 occurred at disk power-on lifetime: 18586 hours (774 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 f9 0a 62 e0 Error: ICRC, ABRT at LBA = 0x00620af9 = 6425337 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 80 7a 0a 62 e0 00 07:18:30.919 WRITE DMA EXT 35 00 80 fa 09 62 e0 00 07:18:30.898 WRITE DMA EXT 35 00 80 7a 09 62 e0 00 07:18:30.877 WRITE DMA EXT 35 00 80 fa 08 62 e0 00 07:18:30.856 WRITE DMA EXT 35 00 80 7a 08 62 e0 00 07:18:30.835 WRITE DMA EXT Error 75 occurred at disk power-on lifetime: 18586 hours (774 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 79 0f 5e e0 Error: ICRC, ABRT at LBA = 0x005e0f79 = 6164345 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 80 fa 0e 5e e0 00 07:16:50.604 WRITE DMA EXT 35 00 80 7a 0e 5e e0 00 07:16:50.583 WRITE DMA EXT 35 00 80 fa 0d 5e e0 00 07:16:50.562 WRITE DMA EXT 35 00 80 7a 0d 5e e0 00 07:16:50.541 WRITE DMA EXT 35 00 80 fa 0c 5e e0 00 07:16:50.521 WRITE DMA EXT Error 74 occurred at disk power-on lifetime: 18586 hours (774 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 79 a2 3d e0 Error: ICRC, ABRT at LBA = 0x003da279 = 4039289 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 80 fa a1 3d e0 00 07:10:27.945 WRITE DMA EXT 35 00 80 7a a1 3d e0 00 07:10:27.924 WRITE DMA EXT 35 00 80 fa a0 3d e0 00 07:10:27.903 WRITE DMA EXT 35 00 80 7a a0 3d e0 00 07:10:27.882 WRITE DMA EXT 35 00 80 fa 9f 3d e0 00 07:10:27.861 WRITE DMA EXT Error 73 occurred at disk power-on lifetime: 18586 hours (774 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 79 94 1b e0 Error: ICRC, ABRT at LBA = 0x001b9479 = 1807481 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 80 fa 93 1b e0 00 07:03:51.028 WRITE DMA EXT 35 00 80 7a 93 1b e0 00 07:03:51.007 WRITE DMA EXT 35 00 80 fa 92 1b e0 00 07:03:50.987 WRITE DMA EXT 35 00 80 7a 92 1b e0 00 07:03:50.966 WRITE DMA EXT 35 00 80 fa 91 1b e0 00 07:03:50.945 WRITE DMA EXT Error 72 occurred at disk power-on lifetime: 18585 hours (774 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 f9 48 04 e0 Error: ICRC, ABRT at LBA = 0x000448f9 = 280825 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 80 7a 48 04 e0 00 06:58:58.417 WRITE DMA EXT 35 00 80 fa 47 04 e0 00 06:58:58.406 WRITE DMA EXT 35 00 80 7a 47 04 e0 00 06:58:58.385 WRITE DMA EXT 35 00 80 fa 46 04 e0 00 06:58:58.364 WRITE DMA EXT 35 00 80 7a 46 04 e0 00 06:58:58.344 WRITE DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 20752 - # 2 Short offline Completed without error 00% 1 - # 3 Short offline Completed without error 00% 0 - # 4 Short offline Interrupted (host reset) 90% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. |
lampslave |
|
Темы:
32
Сообщения:
4801
Участник с: 05 июля 2011
|
200 Multi_Zone_Error_Rate 0x000e 100 100 000 Old_age Always - 10019 Атрибут: 200 (С8) Write Error Rate (MultiZone Error Rate).Хотя threshold почему-то на нуле, странно. А fsck там как? |
frostu-kun |
|
Темы:
1
Сообщения:
6
Участник с: 19 ноября 2011
|
Как сделать проверку fsck? |
nafanja |
|
Темы:
94
Сообщения:
9252
Участник с: 02 июня 2012
заблокирован
|
fsck -f /dev/sdX это лучше с лайф сд делать, что бы были не примонтированы разделы.
Псевдографический инсталлятор Arch Linux ver. 3.8.2
Благодарности принимаются на ЯД 410012815723874 |
frostu-kun |
|
Темы:
1
Сообщения:
6
Участник с: 19 ноября 2011
|
nafanja /dev/sdb2: 19681/6496256 files (1.9% non-contiguous), 2651742/25965270 blocks |
corner |
|
Темы:
6
Сообщения:
773
Участник с: 21 июля 2011
|
Если копьютер стационарный, попробуйте проверить (передернуть, или заменить) шлейф диска. Они иногда слетают. |