NVIDIA\X стартует через раз [РЕШЕНО]

TANK	# 11 лет, 8 месяцев назад
Темы: 14 Сообщения: 51 Участник с: 12 января 2013	Драйвер nvidia, менеджер входа slim. [ 146.254] X.Org X Server 1.14.0 Release Date: 2013-03-05 [ 146.258] X Protocol Version 11, Revision 0 [ 146.259] Build Operating System: Linux 3.8.2-1-ARCH x86_64 [ 146.262] Current Operating System: Linux 53-203.izhnt.ru 3.8.4-1-ARCH #1 SMP PREEMPT Wed Mar 20 22:10:25 CET 2013 x86_64 [ 146.262] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=af2c80ab-a830-4428-9761-1cce5c7f843b ro quiet [ 146.266] Build Date: 09 March 2013 11:43:05AM [ 146.268] [ 146.269] Current version of pixman: 0.28.2 [ 146.272] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 146.272] Markers: (--) probed, () from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 146.279] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Mar 23 14:36:28 2013 [ 146.281] (==) Using config file: "/etc/X11/xorg.conf" [ 146.283] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 146.283] (==) No Layout section. Using the first Screen section. [ 146.283] (==) No screen section available. Using defaults. [ 146.283] () \|-->Screen "Default Screen Section" (0) [ 146.283] () \| \|-->Monitor "<default monitor>" [ 146.283] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 146.283] () \| \|-->Device "Device0" [ 146.283] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 146.283] (==) Automatically adding devices [ 146.283] (==) Automatically enabling devices [ 146.283] (==) Automatically adding GPU devices [ 146.283] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 146.283] Entry deleted from font path. [ 146.283] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 146.283] Entry deleted from font path. [ 146.283] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 146.283] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 146.283] Entry deleted from font path. [ 146.283] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 146.283] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/ [ 146.283] (==) ModulePath set to "/usr/lib/xorg/modules" [ 146.283] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 146.283] (II) Loader magic: 0x7fdc20 [ 146.283] (II) Module ABI versions: [ 146.283] X.Org ANSI C Emulation: 0.4 [ 146.283] X.Org Video Driver: 14.1 [ 146.283] X.Org XInput driver : 19.1 [ 146.283] X.Org Server Extension : 7.0 [ 146.284] (--) PCI:(0:2:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072 [ 146.286] Initializing built-in extension Generic Event Extension [ 146.287] Initializing built-in extension SHAPE [ 146.289] Initializing built-in extension MIT-SHM [ 146.291] Initializing built-in extension XInputExtension [ 146.292] Initializing built-in extension XTEST [ 146.294] Initializing built-in extension BIG-REQUESTS [ 146.296] Initializing built-in extension SYNC [ 146.297] Initializing built-in extension XKEYBOARD [ 146.299] Initializing built-in extension XC-MISC [ 146.300] Initializing built-in extension SECURITY [ 146.302] Initializing built-in extension XINERAMA [ 146.304] Initializing built-in extension XFIXES [ 146.305] Initializing built-in extension RENDER [ 146.307] Initializing built-in extension RANDR [ 146.308] Initializing built-in extension COMPOSITE [ 146.309] Initializing built-in extension DAMAGE [ 146.310] Initializing built-in extension MIT-SCREEN-SAVER [ 146.312] Initializing built-in extension DOUBLE-BUFFER [ 146.313] Initializing built-in extension RECORD [ 146.314] Initializing built-in extension DPMS [ 146.315] Initializing built-in extension X-Resource [ 146.316] Initializing built-in extension XVideo [ 146.317] Initializing built-in extension XVideo-MotionCompensation [ 146.318] Initializing built-in extension XFree86-VidModeExtension [ 146.318] Initializing built-in extension XFree86-DGA [ 146.319] Initializing built-in extension XFree86-DRI [ 146.320] Initializing built-in extension DRI2 [ 146.320] (II) LoadModule: "glx" [ 146.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 146.338] (II) Module glx: vendor="NVIDIA Corporation" [ 146.338] compiled for 4.0.2, module version = 1.0.0 [ 146.338] Module class: X.Org Server Extension [ 146.339] (II) NVIDIA GLX Module 313.26 Wed Feb 27 13:10:40 PST 2013 [ 146.339] Loading extension GLX [ 146.339] (II) LoadModule: "nvidia" [ 146.339] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 146.340] (II) Module nvidia: vendor="NVIDIA Corporation" [ 146.340] compiled for 4.0.2, module version = 1.0.0 [ 146.340] Module class: X.Org Video Driver [ 146.342] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 19.1, need < 19.0). The driver will continue to load, but may behave strangely. [ 146.342] (II) NVIDIA dlloader X Driver 313.26 Wed Feb 27 12:52:26 PST 2013 [ 146.342] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 146.342] (++) using VT number 2 [ 146.342] (II) Loading sub module "wfb" [ 146.342] (II) LoadModule: "wfb" [ 146.342] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 146.342] (II) Module wfb: vendor="X.Org Foundation" [ 146.342] compiled for 1.14.0, module version = 1.0.0 [ 146.342] ABI class: X.Org ANSI C Emulation, version 0.4 [ 146.342] (II) Loading sub module "ramdac" [ 146.342] (II) LoadModule: "ramdac" [ 146.342] (II) Module "ramdac" already built-in [ 146.342] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 146.342] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 146.342] (==) NVIDIA(0): RGB weight 888 [ 146.342] (==) NVIDIA(0): Default visual is TrueColor [ 146.342] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 146.342] () NVIDIA(0): Option "NoLogo" "True" [ 146.343] () NVIDIA(0): Option "Coolbits" "1" [ 146.343] () NVIDIA(0): Enabling 2D acceleration [ 146.430] (II) NVIDIA(GPU-0): Display (Acer X191 (CRT-1)) does not support NVIDIA 3D Vision [ 146.430] (II) NVIDIA(GPU-0): stereo. [ 146.431] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:2:0:0 (GPU-0) [ 146.431] (--) NVIDIA(0): Memory: 1048576 kBytes [ 146.431] (--) NVIDIA(0): VideoBIOS: 60.84.61.00.00 [ 146.431] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 146.433] (--) NVIDIA(0): Valid display device(s) on GeForce 8600 GT at PCI:2:0:0 [ 146.433] (--) NVIDIA(0): CRT-0 [ 146.433] (--) NVIDIA(0): Acer X191 (CRT-1) (connected) [ 146.433] (--) NVIDIA(0): DFP-0 [ 146.433] (--) NVIDIA(0): DFP-1 [ 146.433] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock [ 146.433] (--) NVIDIA(0): Acer X191 (CRT-1): 400.0 MHz maximum pixel clock [ 146.433] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock [ 146.433] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS [ 146.433] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock [ 146.433] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS [ 146.433] () NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 146.433] () NVIDIA(0): device Acer X191 (CRT-1) (Using EDID frequencies has been [ 146.433] () NVIDIA(0): enabled on all display devices.) [ 146.436] (==) NVIDIA(0): [ 146.436] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 146.436] (==) NVIDIA(0): will be used as the requested mode. [ 146.436] (==) NVIDIA(0): [ 146.436] (II) NVIDIA(0): Validated MetaModes: [ 146.436] (II) NVIDIA(0): "CRT-1:nvidia-auto-select" [ 146.436] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024 [ 146.470] (--) NVIDIA(0): DPI set to (87, 86); computed from "UseEdidDpi" X config [ 146.471] (--) NVIDIA(0): option [ 146.471] (--) Depth 24 pixmap format is 32 bpp [ 146.471] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access. [ 146.473] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon [ 146.473] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X [ 146.473] (II) NVIDIA(0): configuration option may not be set correctly. When the [ 146.473] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will [ 146.473] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For [ 146.473] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and [ 146.473] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X [ 146.473] (II) NVIDIA(0): Config Options in the README. [ 146.475] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select" [ 146.498] Loading extension NV-GLX [ 146.521] (==) NVIDIA(0): Disabling shared memory pixmaps [ 146.521] (==) NVIDIA(0): Backing store disabled [ 146.521] (==) NVIDIA(0): Silken mouse enabled [ 146.521] (==) NVIDIA(0): DPMS enabled [ 146.522] Loading extension NV-CONTROL [ 146.522] Loading extension XINERAMA [ 146.522] (II) Loading sub module "dri2" [ 146.522] (II) LoadModule: "dri2" [ 146.522] (II) Module "dri2" already built-in [ 146.522] (II) NVIDIA(0): [DRI2] Setup complete [ 146.522] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 146.522] (--) RandR disabled [ 146.528] (II) Initializing extension GLX [ 146.578] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 146.578] () Power Button: Applying InputClass "evdev keyboard catchall" [ 146.578] (II) LoadModule: "evdev" [ 146.578] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 146.578] (II) Module evdev: vendor="X.Org Foundation" [ 146.578] compiled for 1.14.0, module version = 2.7.3 [ 146.578] Module class: X.Org XInput Driver [ 146.578] ABI class: X.Org XInput driver, version 19.1 [ 146.578] (II) Using input driver 'evdev' for 'Power Button' [ 146.578] () Power Button: always reports core events [ 146.578] () evdev: Power Button: Device: "/dev/input/event4" [ 146.578] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 146.578] (--) evdev: Power Button: Found keys [ 146.578] (II) evdev: Power Button: Configuring as keyboard [ 146.578] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" [ 146.578] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 146.578] () Option "xkb_rules" "evdev" [ 146.578] () Option "xkb_model" "evdev" [ 146.578] () Option "xkb_layout" "us" [ 146.612] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 146.612] () Power Button: Applying InputClass "evdev keyboard catchall" [ 146.612] (II) Using input driver 'evdev' for 'Power Button' [ 146.612] () Power Button: always reports core events [ 146.612] () evdev: Power Button: Device: "/dev/input/event3" [ 146.612] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 146.612] (--) evdev: Power Button: Found keys [ 146.612] (II) evdev: Power Button: Configuring as keyboard [ 146.612] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3" [ 146.612] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 146.612] () Option "xkb_rules" "evdev" [ 146.612] () Option "xkb_model" "evdev" [ 146.612] () Option "xkb_layout" "us" [ 146.612] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event0) [ 146.613] () A4Tech USB Mouse: Applying InputClass "evdev pointer catchall" [ 146.613] (II) Using input driver 'evdev' for 'A4Tech USB Mouse' [ 146.613] () A4Tech USB Mouse: always reports core events [ 146.613] () evdev: A4Tech USB Mouse: Device: "/dev/input/event0" [ 146.613] (--) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xa [ 146.613] (--) evdev: A4Tech USB Mouse: Found 12 mouse buttons [ 146.613] (--) evdev: A4Tech USB Mouse: Found scroll wheel(s) [ 146.613] (--) evdev: A4Tech USB Mouse: Found relative axes [ 146.613] (--) evdev: A4Tech USB Mouse: Found x and y relative axes [ 146.613] (II) evdev: A4Tech USB Mouse: Configuring as mouse [ 146.613] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support [ 146.613] () evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5 [ 146.613] () evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 146.613] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input0/event0" [ 146.613] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE, id 8) [ 146.613] (II) evdev: A4Tech USB Mouse: initialized for relative axes. [ 146.613] () A4Tech USB Mouse: (accel) keeping acceleration scheme 1 [ 146.613] () A4Tech USB Mouse: (accel) acceleration profile 0 [ 146.613] () A4Tech USB Mouse: (accel) acceleration factor: 2.000 [ 146.613] () A4Tech USB Mouse: (accel) acceleration threshold: 4 [ 146.613] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse0) [ 146.613] (II) No input driver specified, ignoring this device. [ 146.613] (II) This device may have been added with another device file. [ 146.614] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1) [ 146.614] () USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 146.614] (II) Using input driver 'evdev' for ' USB Keyboard' [ 146.614] () USB Keyboard: always reports core events [ 146.614] () evdev: USB Keyboard: Device: "/dev/input/event1" [ 146.614] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1503 [ 146.614] (--) evdev: USB Keyboard: Found keys [ 146.614] (II) evdev: USB Keyboard: Configuring as keyboard [ 146.614] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1" [ 146.614] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 9) [ 146.614] () Option "xkb_rules" "evdev" [ 146.614] () Option "xkb_model" "evdev" [ 146.614] () Option "xkb_layout" "us" [ 146.614] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2) [ 146.614] () USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 146.614] (II) Using input driver 'evdev' for ' USB Keyboard' [ 146.614] () USB Keyboard: always reports core events [ 146.614] () evdev: USB Keyboard: Device: "/dev/input/event2" [ 146.614] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1503 [ 146.614] (--) evdev: USB Keyboard: Found keys [ 146.614] (II) evdev: USB Keyboard: Configuring as keyboard [ 146.614] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input2/event2" [ 146.614] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 10) [ 146.614] () Option "xkb_rules" "evdev" [ 146.614] () Option "xkb_model" "evdev" [ 146.614] () Option "xkb_layout" "us" [ 146.615] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event10) [ 146.615] (II) No input driver specified, ignoring this device. [ 146.615] (II) This device may have been added with another device file. [ 146.615] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6) [ 146.615] (II) No input driver specified, ignoring this device. [ 146.615] (II) This device may have been added with another device file. [ 146.615] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event7) [ 146.615] (II) No input driver specified, ignoring this device. [ 146.615] (II) This device may have been added with another device file. [ 146.615] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8) [ 146.615] (II) No input driver specified, ignoring this device. [ 146.615] (II) This device may have been added with another device file. [ 146.616] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event9) [ 146.616] (II) No input driver specified, ignoring this device. [ 146.616] (II) This device may have been added with another device file. [ 146.616] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 146.616] (II) No input driver specified, ignoring this device. [ 146.616] (II) This device may have been added with another device file. [ 485.088] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select" [ 485.140] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon [ 485.140] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X [ 485.140] (II) NVIDIA(0): configuration option may not be set correctly. When the [ 485.140] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will [ 485.140] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For [ 485.140] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and [ 485.140] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X [ 485.140] (II) NVIDIA(0): Config Options in the README. [ 485.196] (II) NVIDIA(GPU-0): Display (Acer X191 (CRT-1)) does not support NVIDIA 3D Vision [ 485.196] (II) NVIDIA(GPU-0): stereo. [ 485.196] () NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 485.196] () NVIDIA(0): device Acer X191 (CRT-1) (Using EDID frequencies has been [ 485.196] (*) NVIDIA(0): enabled on all display devices.) [ 502.247] (II) evdev: USB Keyboard: Close [ 502.247] (II) UnloadModule: "evdev" [ 502.247] (II) evdev: USB Keyboard: Close [ 502.247] (II) UnloadModule: "evdev" [ 502.247] (II) evdev: A4Tech USB Mouse: Close [ 502.247] (II) UnloadModule: "evdev" [ 502.247] (II) evdev: Power Button: Close [ 502.247] (II) UnloadModule: "evdev" [ 502.247] (II) evdev: Power Button: Close [ 502.247] (II) UnloadModule: "evdev" [ 502.472] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error [ 502.472] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error [ 502.472] Fatal server error: [ 502.472] xf86CloseConsole: VT_ACTIVATE failed: Input/output error [ 502.472] [ 502.472] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 502.472] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information. [ 502.472] (EE) [ 502.472] (EE) [ 502.472] (EE) Backtrace: Иногда перестают стартовать графические программы, вываливается такое: No protocol specified Geany: cannot open display Не давно обновил у знакомых арч, проблема теперь появилась эта и у них тоже.

# 11 лет, 8 месяцев назад

Сообщения: 51

Участник с: 12 января 2013

Драйвер nvidia, менеджер входа slim.

[   146.254]
X.Org X Server 1.14.0
Release Date: 2013-03-05
[   146.258] X Protocol Version 11, Revision 0
[   146.259] Build Operating System: Linux 3.8.2-1-ARCH x86_64
[   146.262] Current Operating System: Linux 53-203.izhnt.ru 3.8.4-1-ARCH #1 SMP PREEMPT Wed Mar 20 22:10:25 CET 2013 x86_64
[   146.262] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=af2c80ab-a830-4428-9761-1cce5c7f843b ro quiet
[   146.266] Build Date: 09 March 2013  11:43:05AM
[   146.268]
[   146.269] Current version of pixman: 0.28.2
[   146.272] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   146.272] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   146.279] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Mar 23 14:36:28 2013
[   146.281] (==) Using config file: "/etc/X11/xorg.conf"
[   146.283] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   146.283] (==) No Layout section.  Using the first Screen section.
[   146.283] (==) No screen section available. Using defaults.
[   146.283] (**) |-->Screen "Default Screen Section" (0)
[   146.283] (**) |   |-->Monitor "<default monitor>"
[   146.283] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   146.283] (**) |   |-->Device "Device0"
[   146.283] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   146.283] (==) Automatically adding devices
[   146.283] (==) Automatically enabling devices
[   146.283] (==) Automatically adding GPU devices
[   146.283] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   146.283] 	Entry deleted from font path.
[   146.283] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   146.283] 	Entry deleted from font path.
[   146.283] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   146.283] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   146.283] 	Entry deleted from font path.
[   146.283] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   146.283] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[   146.283] (==) ModulePath set to "/usr/lib/xorg/modules"
[   146.283] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   146.283] (II) Loader magic: 0x7fdc20
[   146.283] (II) Module ABI versions:
[   146.283] 	X.Org ANSI C Emulation: 0.4
[   146.283] 	X.Org Video Driver: 14.1
[   146.283] 	X.Org XInput driver : 19.1
[   146.283] 	X.Org Server Extension : 7.0
[   146.284] (--) PCI:*(0:2:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[   146.286] Initializing built-in extension Generic Event Extension
[   146.287] Initializing built-in extension SHAPE
[   146.289] Initializing built-in extension MIT-SHM
[   146.291] Initializing built-in extension XInputExtension
[   146.292] Initializing built-in extension XTEST
[   146.294] Initializing built-in extension BIG-REQUESTS
[   146.296] Initializing built-in extension SYNC
[   146.297] Initializing built-in extension XKEYBOARD
[   146.299] Initializing built-in extension XC-MISC
[   146.300] Initializing built-in extension SECURITY
[   146.302] Initializing built-in extension XINERAMA
[   146.304] Initializing built-in extension XFIXES
[   146.305] Initializing built-in extension RENDER
[   146.307] Initializing built-in extension RANDR
[   146.308] Initializing built-in extension COMPOSITE
[   146.309] Initializing built-in extension DAMAGE
[   146.310] Initializing built-in extension MIT-SCREEN-SAVER
[   146.312] Initializing built-in extension DOUBLE-BUFFER
[   146.313] Initializing built-in extension RECORD
[   146.314] Initializing built-in extension DPMS
[   146.315] Initializing built-in extension X-Resource
[   146.316] Initializing built-in extension XVideo
[   146.317] Initializing built-in extension XVideo-MotionCompensation
[   146.318] Initializing built-in extension XFree86-VidModeExtension
[   146.318] Initializing built-in extension XFree86-DGA
[   146.319] Initializing built-in extension XFree86-DRI
[   146.320] Initializing built-in extension DRI2
[   146.320] (II) LoadModule: "glx"
[   146.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   146.338] (II) Module glx: vendor="NVIDIA Corporation"
[   146.338] 	compiled for 4.0.2, module version = 1.0.0
[   146.338] 	Module class: X.Org Server Extension
[   146.339] (II) NVIDIA GLX Module  313.26  Wed Feb 27 13:10:40 PST 2013
[   146.339] Loading extension GLX
[   146.339] (II) LoadModule: "nvidia"
[   146.339] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   146.340] (II) Module nvidia: vendor="NVIDIA Corporation"
[   146.340] 	compiled for 4.0.2, module version = 1.0.0
[   146.340] 	Module class: X.Org Video Driver
[   146.342] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 19.1, need < 19.0).  The driver will continue to load, but may behave strangely.
[   146.342] (II) NVIDIA dlloader X Driver  313.26  Wed Feb 27 12:52:26 PST 2013
[   146.342] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   146.342] (++) using VT number 2
[   146.342] (II) Loading sub module "wfb"
[   146.342] (II) LoadModule: "wfb"
[   146.342] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   146.342] (II) Module wfb: vendor="X.Org Foundation"
[   146.342] 	compiled for 1.14.0, module version = 1.0.0
[   146.342] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   146.342] (II) Loading sub module "ramdac"
[   146.342] (II) LoadModule: "ramdac"
[   146.342] (II) Module "ramdac" already built-in
[   146.342] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   146.342] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   146.342] (==) NVIDIA(0): RGB weight 888
[   146.342] (==) NVIDIA(0): Default visual is TrueColor
[   146.342] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   146.342] (**) NVIDIA(0): Option "NoLogo" "True"
[   146.343] (**) NVIDIA(0): Option "Coolbits" "1"
[   146.343] (**) NVIDIA(0): Enabling 2D acceleration
[   146.430] (II) NVIDIA(GPU-0): Display (Acer X191 (CRT-1)) does not support NVIDIA 3D Vision
[   146.430] (II) NVIDIA(GPU-0):     stereo.
[   146.431] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:2:0:0 (GPU-0)
[   146.431] (--) NVIDIA(0): Memory: 1048576 kBytes
[   146.431] (--) NVIDIA(0): VideoBIOS: 60.84.61.00.00
[   146.431] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   146.433] (--) NVIDIA(0): Valid display device(s) on GeForce 8600 GT at PCI:2:0:0
[   146.433] (--) NVIDIA(0):     CRT-0
[   146.433] (--) NVIDIA(0):     Acer X191 (CRT-1) (connected)
[   146.433] (--) NVIDIA(0):     DFP-0
[   146.433] (--) NVIDIA(0):     DFP-1
[   146.433] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[   146.433] (--) NVIDIA(0): Acer X191 (CRT-1): 400.0 MHz maximum pixel clock
[   146.433] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[   146.433] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[   146.433] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[   146.433] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[   146.433] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   146.433] (**) NVIDIA(0):     device Acer X191 (CRT-1) (Using EDID frequencies has been
[   146.433] (**) NVIDIA(0):     enabled on all display devices.)
[   146.436] (==) NVIDIA(0):
[   146.436] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   146.436] (==) NVIDIA(0):     will be used as the requested mode.
[   146.436] (==) NVIDIA(0):
[   146.436] (II) NVIDIA(0): Validated MetaModes:
[   146.436] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select"
[   146.436] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[   146.470] (--) NVIDIA(0): DPI set to (87, 86); computed from "UseEdidDpi" X config
[   146.471] (--) NVIDIA(0):     option
[   146.471] (--) Depth 24 pixmap format is 32 bpp
[   146.471] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[   146.473] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   146.473] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   146.473] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   146.473] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   146.473] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   146.473] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   146.473] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   146.473] (II) NVIDIA(0):     Config Options in the README.
[   146.475] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[   146.498] Loading extension NV-GLX
[   146.521] (==) NVIDIA(0): Disabling shared memory pixmaps
[   146.521] (==) NVIDIA(0): Backing store disabled
[   146.521] (==) NVIDIA(0): Silken mouse enabled
[   146.521] (==) NVIDIA(0): DPMS enabled
[   146.522] Loading extension NV-CONTROL
[   146.522] Loading extension XINERAMA
[   146.522] (II) Loading sub module "dri2"
[   146.522] (II) LoadModule: "dri2"
[   146.522] (II) Module "dri2" already built-in
[   146.522] (II) NVIDIA(0): [DRI2] Setup complete
[   146.522] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   146.522] (--) RandR disabled
[   146.528] (II) Initializing extension GLX
[   146.578] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   146.578] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   146.578] (II) LoadModule: "evdev"
[   146.578] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   146.578] (II) Module evdev: vendor="X.Org Foundation"
[   146.578] 	compiled for 1.14.0, module version = 2.7.3
[   146.578] 	Module class: X.Org XInput Driver
[   146.578] 	ABI class: X.Org XInput driver, version 19.1
[   146.578] (II) Using input driver 'evdev' for 'Power Button'
[   146.578] (**) Power Button: always reports core events
[   146.578] (**) evdev: Power Button: Device: "/dev/input/event4"
[   146.578] (--) evdev: Power Button: Vendor 0 Product 0x1
[   146.578] (--) evdev: Power Button: Found keys
[   146.578] (II) evdev: Power Button: Configuring as keyboard
[   146.578] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   146.578] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   146.578] (**) Option "xkb_rules" "evdev"
[   146.578] (**) Option "xkb_model" "evdev"
[   146.578] (**) Option "xkb_layout" "us"
[   146.612] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   146.612] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   146.612] (II) Using input driver 'evdev' for 'Power Button'
[   146.612] (**) Power Button: always reports core events
[   146.612] (**) evdev: Power Button: Device: "/dev/input/event3"
[   146.612] (--) evdev: Power Button: Vendor 0 Product 0x1
[   146.612] (--) evdev: Power Button: Found keys
[   146.612] (II) evdev: Power Button: Configuring as keyboard
[   146.612] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[   146.612] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   146.612] (**) Option "xkb_rules" "evdev"
[   146.612] (**) Option "xkb_model" "evdev"
[   146.612] (**) Option "xkb_layout" "us"
[   146.612] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event0)
[   146.613] (**) A4Tech USB Mouse: Applying InputClass "evdev pointer catchall"
[   146.613] (II) Using input driver 'evdev' for 'A4Tech USB Mouse'
[   146.613] (**) A4Tech USB Mouse: always reports core events
[   146.613] (**) evdev: A4Tech USB Mouse: Device: "/dev/input/event0"
[   146.613] (--) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xa
[   146.613] (--) evdev: A4Tech USB Mouse: Found 12 mouse buttons
[   146.613] (--) evdev: A4Tech USB Mouse: Found scroll wheel(s)
[   146.613] (--) evdev: A4Tech USB Mouse: Found relative axes
[   146.613] (--) evdev: A4Tech USB Mouse: Found x and y relative axes
[   146.613] (II) evdev: A4Tech USB Mouse: Configuring as mouse
[   146.613] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support
[   146.613] (**) evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5
[   146.613] (**) evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   146.613] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input0/event0"
[   146.613] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE, id 8)
[   146.613] (II) evdev: A4Tech USB Mouse: initialized for relative axes.
[   146.613] (**) A4Tech USB Mouse: (accel) keeping acceleration scheme 1
[   146.613] (**) A4Tech USB Mouse: (accel) acceleration profile 0
[   146.613] (**) A4Tech USB Mouse: (accel) acceleration factor: 2.000
[   146.613] (**) A4Tech USB Mouse: (accel) acceleration threshold: 4
[   146.613] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse0)
[   146.613] (II) No input driver specified, ignoring this device.
[   146.613] (II) This device may have been added with another device file.
[   146.614] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event1)
[   146.614] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   146.614] (II) Using input driver 'evdev' for '  USB Keyboard'
[   146.614] (**)   USB Keyboard: always reports core events
[   146.614] (**) evdev:   USB Keyboard: Device: "/dev/input/event1"
[   146.614] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1503
[   146.614] (--) evdev:   USB Keyboard: Found keys
[   146.614] (II) evdev:   USB Keyboard: Configuring as keyboard
[   146.614] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
[   146.614] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 9)
[   146.614] (**) Option "xkb_rules" "evdev"
[   146.614] (**) Option "xkb_model" "evdev"
[   146.614] (**) Option "xkb_layout" "us"
[   146.614] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event2)
[   146.614] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   146.614] (II) Using input driver 'evdev' for '  USB Keyboard'
[   146.614] (**)   USB Keyboard: always reports core events
[   146.614] (**) evdev:   USB Keyboard: Device: "/dev/input/event2"
[   146.614] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1503
[   146.614] (--) evdev:   USB Keyboard: Found keys
[   146.614] (II) evdev:   USB Keyboard: Configuring as keyboard
[   146.614] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input2/event2"
[   146.614] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 10)
[   146.614] (**) Option "xkb_rules" "evdev"
[   146.614] (**) Option "xkb_model" "evdev"
[   146.614] (**) Option "xkb_layout" "us"
[   146.615] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event10)
[   146.615] (II) No input driver specified, ignoring this device.
[   146.615] (II) This device may have been added with another device file.
[   146.615] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[   146.615] (II) No input driver specified, ignoring this device.
[   146.615] (II) This device may have been added with another device file.
[   146.615] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event7)
[   146.615] (II) No input driver specified, ignoring this device.
[   146.615] (II) This device may have been added with another device file.
[   146.615] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[   146.615] (II) No input driver specified, ignoring this device.
[   146.615] (II) This device may have been added with another device file.
[   146.616] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event9)
[   146.616] (II) No input driver specified, ignoring this device.
[   146.616] (II) This device may have been added with another device file.
[   146.616] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[   146.616] (II) No input driver specified, ignoring this device.
[   146.616] (II) This device may have been added with another device file.
[   485.088] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[   485.140] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[   485.140] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[   485.140] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[   485.140] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[   485.140] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[   485.140] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[   485.140] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[   485.140] (II) NVIDIA(0):     Config Options in the README.
[   485.196] (II) NVIDIA(GPU-0): Display (Acer X191 (CRT-1)) does not support NVIDIA 3D Vision
[   485.196] (II) NVIDIA(GPU-0):     stereo.
[   485.196] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[   485.196] (**) NVIDIA(0):     device Acer X191 (CRT-1) (Using EDID frequencies has been
[   485.196] (**) NVIDIA(0):     enabled on all display devices.)
[   502.247] (II) evdev:   USB Keyboard: Close
[   502.247] (II) UnloadModule: "evdev"
[   502.247] (II) evdev:   USB Keyboard: Close
[   502.247] (II) UnloadModule: "evdev"
[   502.247] (II) evdev: A4Tech USB Mouse: Close
[   502.247] (II) UnloadModule: "evdev"
[   502.247] (II) evdev: Power Button: Close
[   502.247] (II) UnloadModule: "evdev"
[   502.247] (II) evdev: Power Button: Close
[   502.247] (II) UnloadModule: "evdev"
[   502.472] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[   502.472] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[   502.472]
Fatal server error:
[   502.472] xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[   502.472]
[   502.472] (EE)
Please consult the The X.Org Foundation support
	 at http://wiki.x.org
 for help.
[   502.472] (EE) Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[   502.472] (EE)
[   502.472] (EE)
[   502.472] (EE) Backtrace:

Иногда перестают стартовать графические программы, вываливается такое:

No protocol specified
Geany: cannot open
display

Не давно обновил у знакомых арч, проблема теперь появилась эта и у них тоже.

Kycok	# 11 лет, 8 месяцев назад
Темы: 32 Сообщения: 1585 Участник с: 09 января 2013	Фатальная ошибка ввода-вывода... Судя по логу, связано с дровами видяшки. Можно попробовать стартануть с nouveau GitHub, ArchWiki, AUR

and4027	# 11 лет, 8 месяцев назад
Темы: 0 Сообщения: 49 Участник с: 08 сентября 2010	Во всяком случае, Вас честно предупредили: [ 146.342] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 19.1, need < 19.0). The driver will continue to load, but may behave strangely. "драйвер будет загружен, но может вести себя странно". Можно попробовать воспользоваться советом из первого предложения - откатиться на 19.0, если совет Kycok не поможет.

and4027

# 11 лет, 8 месяцев назад

Темы: 0

Сообщения: 49

Участник с: 08 сентября 2010

Во всяком случае, Вас честно предупредили:

[   146.342] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 19.1, need < 19.0).  The driver will continue to load, but may behave strangely.

"драйвер будет загружен, но может вести себя странно".
Можно попробовать воспользоваться советом из первого предложения - откатиться на 19.0, если совет Kycok не поможет.

vasek	# 11 лет, 8 месяцев назад
Темы: 47 Сообщения: 11859 Участник с: 17 февраля 2013	Видно долго писал ответ - and4027 все объяснил. Строка из лога [ 146.283] X.Org XInput driver : 19.1 откуда видно, что у тебя установлена версия драйвера X.Org XInput driver : 19.1 В этой строке [ 146.342] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 19.1, need < 19.0). The driver will continue to load, but may behave strangely. тебя предупреждают, что установлена версия 19.1, а необходима меньше 19.0. Драйвер будет загружен, но он может вести себя странно,то есть иногда все будет хорошо, а иногда то, чтот ты получаешь: Fatal server error: [ 502.472] xf86CloseConsole: VT_ACTIVATE failed: Input/output error Компьютер тебя честно предупредил, так что на него обижаться не стоит. Выход — попробуй пока откатись и ищи в интернете, может кто то уже и нашел решение. За тебя искать никто небудет. Ошибки не исчезают с опытом - они просто умнеют

vasek

# 11 лет, 8 месяцев назад

Темы: 47

Сообщения: 11859

Участник с: 17 февраля 2013

Видно долго писал ответ - and4027 все объяснил.

Строка из лога
[ 146.283] X.Org XInput driver : 19.1
откуда видно, что у тебя установлена версия драйвера X.Org XInput driver : 19.1

В этой строке
[ 146.342] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 19.1, need < 19.0). The driver will continue to load, but may behave strangely.

тебя предупреждают, что установлена версия 19.1, а необходима меньше 19.0. Драйвер будет загружен, но он может вести себя странно,то есть иногда все будет хорошо, а иногда то, чтот ты получаешь:
Fatal server error:
[ 502.472] xf86CloseConsole: VT_ACTIVATE failed: Input/output error
Компьютер тебя честно предупредил, так что на него обижаться не стоит.

Выход — попробуй пока откатись и ищи в интернете, может кто то уже и нашел решение. За тебя искать никто небудет.

Ошибки не исчезают с опытом - они просто умнеют

TANK	# 11 лет, 8 месяцев назад
Темы: 14 Сообщения: 51 Участник с: 12 января 2013	Поставил xorg отсюда. [xorg113] Server = http://catalyst.wirephire.com/repo/xorg113/$arch При старте выдаёт такое [ 13.365] X.Org X Server 1.13.3 Release Date: 2013-03-07 [ 13.366] X Protocol Version 11, Revision 0 [ 13.366] Build Operating System: Linux 3.8.2-1-ARCH x86_64 [ 13.366] Current Operating System: Linux localhost 3.0.70-1-lts #1 SMP Wed Mar 20 22:07:06 CET 2013 x86_64 [ 13.366] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=af2c80ab-a830-4428-9761-1cce5c7f843b rw [ 13.366] Build Date: 09 March 2013 08:45:37AM [ 13.366] [ 13.366] Current version of pixman: 0.28.2 [ 13.366] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 13.366] Markers: (--) probed, () from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 13.366] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 29 10:25:59 2013 [ 13.367] (==) Using config file: "/etc/X11/xorg.conf" [ 13.367] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 13.367] (==) ServerLayout "Layout0" [ 13.367] () \|-->Screen "Screen0" (0) [ 13.367] () \| \|-->Monitor "Monitor0" [ 13.367] () \| \|-->Device "Device0" [ 13.367] () \|-->Input Device "Keyboard0" [ 13.367] () \|-->Input Device "Mouse0" [ 13.367] (*) Option "Xinerama" "0" [ 13.367] (==) Automatically adding devices [ 13.367] (==) Automatically enabling devices [ 13.367] (==) Automatically adding GPU devices [ 13.367] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 13.367] Entry deleted from font path. [ 13.367] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 13.367] (==) ModulePath set to "/usr/lib/xorg/modules" [ 13.367] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 13.367] (WW) Disabling Keyboard0 [ 13.367] (WW) Disabling Mouse0 [ 13.367] (II) Loader magic: 0x7fcc20 [ 13.367] (II) Module ABI versions: [ 13.367] X.Org ANSI C Emulation: 0.4 [ 13.367] X.Org Video Driver: 13.1 [ 13.367] X.Org XInput driver : 18.0 [ 13.367] X.Org Server Extension : 7.0 [ 13.368] (--) PCI:(0:2:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072 [ 13.368] Initializing built-in extension Generic Event Extension [ 13.368] Initializing built-in extension SHAPE [ 13.368] Initializing built-in extension MIT-SHM [ 13.368] Initializing built-in extension XInputExtension [ 13.368] Initializing built-in extension XTEST [ 13.368] Initializing built-in extension BIG-REQUESTS [ 13.368] Initializing built-in extension SYNC [ 13.368] Initializing built-in extension XKEYBOARD [ 13.368] Initializing built-in extension XC-MISC [ 13.368] Initializing built-in extension SECURITY [ 13.368] Initializing built-in extension XINERAMA [ 13.368] Initializing built-in extension XFIXES [ 13.368] Initializing built-in extension RENDER [ 13.368] Initializing built-in extension RANDR [ 13.368] Initializing built-in extension COMPOSITE [ 13.368] Initializing built-in extension DAMAGE [ 13.368] Initializing built-in extension MIT-SCREEN-SAVER [ 13.368] Initializing built-in extension DOUBLE-BUFFER [ 13.368] Initializing built-in extension RECORD [ 13.368] Initializing built-in extension DPMS [ 13.368] Initializing built-in extension X-Resource [ 13.368] Initializing built-in extension XVideo [ 13.368] Initializing built-in extension XVideo-MotionCompensation [ 13.368] Initializing built-in extension XFree86-VidModeExtension [ 13.368] Initializing built-in extension XFree86-DGA [ 13.368] Initializing built-in extension XFree86-DRI [ 13.368] Initializing built-in extension DRI2 [ 13.368] (II) LoadModule: "glx" [ 13.376] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 13.776] (II) Module glx: vendor="NVIDIA Corporation" [ 13.776] compiled for 4.0.2, module version = 1.0.0 [ 13.776] Module class: X.Org Server Extension [ 13.776] (II) NVIDIA GLX Module 313.26 Wed Feb 27 13:10:40 PST 2013 [ 13.786] Loading extension GLX [ 13.786] (II) LoadModule: "nvidia" [ 13.786] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 13.787] (II) Module nvidia: vendor="NVIDIA Corporation" [ 13.787] compiled for 4.0.2, module version = 1.0.0 [ 13.787] Module class: X.Org Video Driver [ 13.787] (II) NVIDIA dlloader X Driver 313.26 Wed Feb 27 12:52:26 PST 2013 [ 13.787] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 13.787] (++) using VT number 7 [ 13.790] (II) Loading sub module "wfb" [ 13.790] (II) LoadModule: "wfb" [ 13.804] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 13.804] (II) Module wfb: vendor="X.Org Foundation" [ 13.804] compiled for 1.13.3, module version = 1.0.0 [ 13.804] ABI class: X.Org ANSI C Emulation, version 0.4 [ 13.804] (II) Loading sub module "ramdac" [ 13.804] (II) LoadModule: "ramdac" [ 13.804] (II) Module "ramdac" already built-in [ 13.804] () NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 13.804] (==) NVIDIA(0): RGB weight 888 [ 13.804] (==) NVIDIA(0): Default visual is TrueColor [ 13.804] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 13.804] () NVIDIA(0): Option "Stereo" "0" [ 13.804] () NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1" [ 13.805] () NVIDIA(0): Stereo disabled by request [ 13.805] () NVIDIA(0): Option "MetaModes" "1152x864_75 +0+0; nvidia-auto-select +0+0" [ 13.805] () NVIDIA(0): Enabling 2D acceleration [ 14.588] (II) NVIDIA(GPU-0): Display (Sony CPD-E100E (CRT-1)) does not support NVIDIA 3D [ 14.588] (II) NVIDIA(GPU-0): Vision stereo. [ 14.590] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:2:0:0 (GPU-0) [ 14.590] (--) NVIDIA(0): Memory: 1048576 kBytes [ 14.590] (--) NVIDIA(0): VideoBIOS: 60.84.61.00.00 [ 14.590] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 14.592] (--) NVIDIA(0): Valid display device(s) on GeForce 8600 GT at PCI:2:0:0 [ 14.592] (--) NVIDIA(0): CRT-0 [ 14.592] (--) NVIDIA(0): Sony CPD-E100E (CRT-1) (connected) [ 14.592] (--) NVIDIA(0): DFP-0 [ 14.592] (--) NVIDIA(0): DFP-1 [ 14.592] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock [ 14.592] (--) NVIDIA(0): Sony CPD-E100E (CRT-1): 400.0 MHz maximum pixel clock [ 14.592] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock [ 14.592] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS [ 14.592] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock [ 14.592] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS [ 14.592] () NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 14.592] () NVIDIA(0): device Sony CPD-E100E (CRT-1) (Using EDID frequencies has [ 14.592] () NVIDIA(0): been enabled on all display devices.) [ 14.605] (II) NVIDIA(0): Validated MetaModes: [ 14.605] (II) NVIDIA(0): "1152x864_75+0+0" [ 14.605] (II) NVIDIA(0): "nvidia-auto-select+0+0" [ 14.605] (II) NVIDIA(0): Virtual screen size determined to be 1152 x 864 [ 14.634] (--) NVIDIA(0): DPI set to (104, 99); computed from "UseEdidDpi" X config [ 14.634] (--) NVIDIA(0): option [ 14.634] (--) Depth 24 pixmap format is 32 bpp [ 14.634] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access. [ 14.638] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon [ 14.638] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X [ 14.638] (II) NVIDIA(0): configuration option may not be set correctly. When the [ 14.638] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will [ 14.638] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For [ 14.638] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and [ 14.638] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X [ 14.638] (II) NVIDIA(0): Config Options in the README. [ 14.639] (II) NVIDIA(0): Setting mode "1152x864_75+0+0" [ 14.676] Loading extension NV-GLX [ 14.697] (==) NVIDIA(0): Disabling shared memory pixmaps [ 14.697] (==) NVIDIA(0): Backing store disabled [ 14.697] (==) NVIDIA(0): Silken mouse enabled [ 14.698] () NVIDIA(0): DPMS enabled [ 14.699] Loading extension NV-CONTROL [ 14.700] Loading extension XINERAMA [ 14.700] (II) Loading sub module "dri2" [ 14.700] (II) LoadModule: "dri2" [ 14.700] (II) Module "dri2" already built-in [ 14.700] (II) NVIDIA(0): [DRI2] Setup complete [ 14.700] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 14.700] (--) RandR disabled [ 14.708] (II) Initializing extension GLX [ 14.911] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 14.911] () Power Button: Applying InputClass "evdev keyboard catchall" [ 14.911] (II) LoadModule: "evdev" [ 14.912] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 14.912] (II) Module evdev: vendor="X.Org Foundation" [ 14.912] compiled for 1.13.0, module version = 2.7.3 [ 14.912] Module class: X.Org XInput Driver [ 14.912] ABI class: X.Org XInput driver, version 18.0 [ 14.912] (II) Using input driver 'evdev' for 'Power Button' [ 14.912] () Power Button: always reports core events [ 14.912] () evdev: Power Button: Device: "/dev/input/event4" [ 14.912] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 14.912] (--) evdev: Power Button: Found keys [ 14.912] (II) evdev: Power Button: Configuring as keyboard [ 14.912] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" [ 14.912] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 14.912] () Option "xkb_rules" "evdev" [ 14.912] () Option "xkb_model" "evdev" [ 14.912] () Option "xkb_layout" "us" [ 14.946] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 14.946] () Power Button: Applying InputClass "evdev keyboard catchall" [ 14.946] (II) Using input driver 'evdev' for 'Power Button' [ 14.946] () Power Button: always reports core events [ 14.946] () evdev: Power Button: Device: "/dev/input/event3" [ 14.946] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 14.946] (--) evdev: Power Button: Found keys [ 14.946] (II) evdev: Power Button: Configuring as keyboard [ 14.946] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3" [ 14.946] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 14.946] () Option "xkb_rules" "evdev" [ 14.946] () Option "xkb_model" "evdev" [ 14.946] () Option "xkb_layout" "us" [ 14.947] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event0) [ 14.947] () A4Tech USB Mouse: Applying InputClass "evdev pointer catchall" [ 14.947] (II) Using input driver 'evdev' for 'A4Tech USB Mouse' [ 14.947] () A4Tech USB Mouse: always reports core events [ 14.947] () evdev: A4Tech USB Mouse: Device: "/dev/input/event0" [ 14.947] (--) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xa [ 14.947] (--) evdev: A4Tech USB Mouse: Found 12 mouse buttons [ 14.947] (--) evdev: A4Tech USB Mouse: Found scroll wheel(s) [ 14.947] (--) evdev: A4Tech USB Mouse: Found relative axes [ 14.947] (--) evdev: A4Tech USB Mouse: Found x and y relative axes [ 14.947] (II) evdev: A4Tech USB Mouse: Configuring as mouse [ 14.947] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support [ 14.947] () evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5 [ 14.947] () evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 14.947] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input0/event0" [ 14.947] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE, id 8) [ 14.947] (II) evdev: A4Tech USB Mouse: initialized for relative axes. [ 14.947] () A4Tech USB Mouse: (accel) keeping acceleration scheme 1 [ 14.947] () A4Tech USB Mouse: (accel) acceleration profile 0 [ 14.947] () A4Tech USB Mouse: (accel) acceleration factor: 2.000 [ 14.947] () A4Tech USB Mouse: (accel) acceleration threshold: 4 [ 14.948] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse0) [ 14.948] (II) No input driver specified, ignoring this device. [ 14.948] (II) This device may have been added with another device file. [ 14.948] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1) [ 14.948] () USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 14.948] (II) Using input driver 'evdev' for ' USB Keyboard' [ 14.948] () USB Keyboard: always reports core events [ 14.948] () evdev: USB Keyboard: Device: "/dev/input/event1" [ 14.948] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1503 [ 14.948] (--) evdev: USB Keyboard: Found keys [ 14.948] (II) evdev: USB Keyboard: Configuring as keyboard [ 14.948] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1" [ 14.948] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 9) [ 14.948] () Option "xkb_rules" "evdev" [ 14.948] () Option "xkb_model" "evdev" [ 14.948] () Option "xkb_layout" "us" [ 14.949] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2) [ 14.949] () USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 14.949] (II) Using input driver 'evdev' for ' USB Keyboard' [ 14.949] () USB Keyboard: always reports core events [ 14.949] () evdev: USB Keyboard: Device: "/dev/input/event2" [ 14.949] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1503 [ 14.949] (--) evdev: USB Keyboard: Found keys [ 14.949] (II) evdev: USB Keyboard: Configuring as keyboard [ 14.949] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input2/event2" [ 14.949] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 10) [ 14.949] () Option "xkb_rules" "evdev" [ 14.949] () Option "xkb_model" "evdev" [ 14.949] () Option "xkb_layout" "us" [ 14.949] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 14.949] (II) No input driver specified, ignoring this device. [ 14.949] (II) This device may have been added with another device file. Если запускать через systemctl start slim, то всегда работает нормально. Nouveau не вариант, я заядлый геймер.

TANK

# 11 лет, 8 месяцев назад

Темы: 14

Сообщения: 51

Участник с: 12 января 2013

Поставил xorg отсюда.

[xorg113]
Server = http://catalyst.wirephire.com/repo/xorg113/$arch

При старте выдаёт такое

[    13.365]
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    13.366] X Protocol Version 11, Revision 0
[    13.366] Build Operating System: Linux 3.8.2-1-ARCH x86_64
[    13.366] Current Operating System: Linux localhost 3.0.70-1-lts #1 SMP Wed Mar 20 22:07:06 CET 2013 x86_64
[    13.366] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=af2c80ab-a830-4428-9761-1cce5c7f843b rw
[    13.366] Build Date: 09 March 2013  08:45:37AM
[    13.366]
[    13.366] Current version of pixman: 0.28.2
[    13.366] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    13.366] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.366] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 29 10:25:59 2013
[    13.367] (==) Using config file: "/etc/X11/xorg.conf"
[    13.367] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.367] (==) ServerLayout "Layout0"
[    13.367] (**) |-->Screen "Screen0" (0)
[    13.367] (**) |   |-->Monitor "Monitor0"
[    13.367] (**) |   |-->Device "Device0"
[    13.367] (**) |-->Input Device "Keyboard0"
[    13.367] (**) |-->Input Device "Mouse0"
[    13.367] (**) Option "Xinerama" "0"
[    13.367] (==) Automatically adding devices
[    13.367] (==) Automatically enabling devices
[    13.367] (==) Automatically adding GPU devices
[    13.367] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    13.367] 	Entry deleted from font path.
[    13.367] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    13.367] (==) ModulePath set to "/usr/lib/xorg/modules"
[    13.367] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    13.367] (WW) Disabling Keyboard0
[    13.367] (WW) Disabling Mouse0
[    13.367] (II) Loader magic: 0x7fcc20
[    13.367] (II) Module ABI versions:
[    13.367] 	X.Org ANSI C Emulation: 0.4
[    13.367] 	X.Org Video Driver: 13.1
[    13.367] 	X.Org XInput driver : 18.0
[    13.367] 	X.Org Server Extension : 7.0
[    13.368] (--) PCI:*(0:2:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[    13.368] Initializing built-in extension Generic Event Extension
[    13.368] Initializing built-in extension SHAPE
[    13.368] Initializing built-in extension MIT-SHM
[    13.368] Initializing built-in extension XInputExtension
[    13.368] Initializing built-in extension XTEST
[    13.368] Initializing built-in extension BIG-REQUESTS
[    13.368] Initializing built-in extension SYNC
[    13.368] Initializing built-in extension XKEYBOARD
[    13.368] Initializing built-in extension XC-MISC
[    13.368] Initializing built-in extension SECURITY
[    13.368] Initializing built-in extension XINERAMA
[    13.368] Initializing built-in extension XFIXES
[    13.368] Initializing built-in extension RENDER
[    13.368] Initializing built-in extension RANDR
[    13.368] Initializing built-in extension COMPOSITE
[    13.368] Initializing built-in extension DAMAGE
[    13.368] Initializing built-in extension MIT-SCREEN-SAVER
[    13.368] Initializing built-in extension DOUBLE-BUFFER
[    13.368] Initializing built-in extension RECORD
[    13.368] Initializing built-in extension DPMS
[    13.368] Initializing built-in extension X-Resource
[    13.368] Initializing built-in extension XVideo
[    13.368] Initializing built-in extension XVideo-MotionCompensation
[    13.368] Initializing built-in extension XFree86-VidModeExtension
[    13.368] Initializing built-in extension XFree86-DGA
[    13.368] Initializing built-in extension XFree86-DRI
[    13.368] Initializing built-in extension DRI2
[    13.368] (II) LoadModule: "glx"
[    13.376] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    13.776] (II) Module glx: vendor="NVIDIA Corporation"
[    13.776] 	compiled for 4.0.2, module version = 1.0.0
[    13.776] 	Module class: X.Org Server Extension
[    13.776] (II) NVIDIA GLX Module  313.26  Wed Feb 27 13:10:40 PST 2013
[    13.786] Loading extension GLX
[    13.786] (II) LoadModule: "nvidia"
[    13.786] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    13.787] (II) Module nvidia: vendor="NVIDIA Corporation"
[    13.787] 	compiled for 4.0.2, module version = 1.0.0
[    13.787] 	Module class: X.Org Video Driver
[    13.787] (II) NVIDIA dlloader X Driver  313.26  Wed Feb 27 12:52:26 PST 2013
[    13.787] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    13.787] (++) using VT number 7
[    13.790] (II) Loading sub module "wfb"
[    13.790] (II) LoadModule: "wfb"
[    13.804] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    13.804] (II) Module wfb: vendor="X.Org Foundation"
[    13.804] 	compiled for 1.13.3, module version = 1.0.0
[    13.804] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    13.804] (II) Loading sub module "ramdac"
[    13.804] (II) LoadModule: "ramdac"
[    13.804] (II) Module "ramdac" already built-in
[    13.804] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    13.804] (==) NVIDIA(0): RGB weight 888
[    13.804] (==) NVIDIA(0): Default visual is TrueColor
[    13.804] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    13.804] (**) NVIDIA(0): Option "Stereo" "0"
[    13.804] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "CRT-1"
[    13.805] (**) NVIDIA(0): Stereo disabled by request
[    13.805] (**) NVIDIA(0): Option "MetaModes" "1152x864_75 +0+0; nvidia-auto-select +0+0"
[    13.805] (**) NVIDIA(0): Enabling 2D acceleration
[    14.588] (II) NVIDIA(GPU-0): Display (Sony CPD-E100E (CRT-1)) does not support NVIDIA 3D
[    14.588] (II) NVIDIA(GPU-0):     Vision stereo.
[    14.590] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:2:0:0 (GPU-0)
[    14.590] (--) NVIDIA(0): Memory: 1048576 kBytes
[    14.590] (--) NVIDIA(0): VideoBIOS: 60.84.61.00.00
[    14.590] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    14.592] (--) NVIDIA(0): Valid display device(s) on GeForce 8600 GT at PCI:2:0:0
[    14.592] (--) NVIDIA(0):     CRT-0
[    14.592] (--) NVIDIA(0):     Sony CPD-E100E (CRT-1) (connected)
[    14.592] (--) NVIDIA(0):     DFP-0
[    14.592] (--) NVIDIA(0):     DFP-1
[    14.592] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    14.592] (--) NVIDIA(0): Sony CPD-E100E (CRT-1): 400.0 MHz maximum pixel clock
[    14.592] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[    14.592] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    14.592] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    14.592] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    14.592] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    14.592] (**) NVIDIA(0):     device Sony CPD-E100E (CRT-1) (Using EDID frequencies has
[    14.592] (**) NVIDIA(0):     been enabled on all display devices.)
[    14.605] (II) NVIDIA(0): Validated MetaModes:
[    14.605] (II) NVIDIA(0):     "1152x864_75+0+0"
[    14.605] (II) NVIDIA(0):     "nvidia-auto-select+0+0"
[    14.605] (II) NVIDIA(0): Virtual screen size determined to be 1152 x 864
[    14.634] (--) NVIDIA(0): DPI set to (104, 99); computed from "UseEdidDpi" X config
[    14.634] (--) NVIDIA(0):     option
[    14.634] (--) Depth 24 pixmap format is 32 bpp
[    14.634] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    14.638] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    14.638] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    14.638] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    14.638] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    14.638] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    14.638] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    14.638] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    14.638] (II) NVIDIA(0):     Config Options in the README.
[    14.639] (II) NVIDIA(0): Setting mode "1152x864_75+0+0"
[    14.676] Loading extension NV-GLX
[    14.697] (==) NVIDIA(0): Disabling shared memory pixmaps
[    14.697] (==) NVIDIA(0): Backing store disabled
[    14.697] (==) NVIDIA(0): Silken mouse enabled
[    14.698] (**) NVIDIA(0): DPMS enabled
[    14.699] Loading extension NV-CONTROL
[    14.700] Loading extension XINERAMA
[    14.700] (II) Loading sub module "dri2"
[    14.700] (II) LoadModule: "dri2"
[    14.700] (II) Module "dri2" already built-in
[    14.700] (II) NVIDIA(0): [DRI2] Setup complete
[    14.700] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    14.700] (--) RandR disabled
[    14.708] (II) Initializing extension GLX
[    14.911] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    14.911] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    14.911] (II) LoadModule: "evdev"
[    14.912] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    14.912] (II) Module evdev: vendor="X.Org Foundation"
[    14.912] 	compiled for 1.13.0, module version = 2.7.3
[    14.912] 	Module class: X.Org XInput Driver
[    14.912] 	ABI class: X.Org XInput driver, version 18.0
[    14.912] (II) Using input driver 'evdev' for 'Power Button'
[    14.912] (**) Power Button: always reports core events
[    14.912] (**) evdev: Power Button: Device: "/dev/input/event4"
[    14.912] (--) evdev: Power Button: Vendor 0 Product 0x1
[    14.912] (--) evdev: Power Button: Found keys
[    14.912] (II) evdev: Power Button: Configuring as keyboard
[    14.912] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    14.912] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    14.912] (**) Option "xkb_rules" "evdev"
[    14.912] (**) Option "xkb_model" "evdev"
[    14.912] (**) Option "xkb_layout" "us"
[    14.946] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    14.946] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    14.946] (II) Using input driver 'evdev' for 'Power Button'
[    14.946] (**) Power Button: always reports core events
[    14.946] (**) evdev: Power Button: Device: "/dev/input/event3"
[    14.946] (--) evdev: Power Button: Vendor 0 Product 0x1
[    14.946] (--) evdev: Power Button: Found keys
[    14.946] (II) evdev: Power Button: Configuring as keyboard
[    14.946] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[    14.946] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    14.946] (**) Option "xkb_rules" "evdev"
[    14.946] (**) Option "xkb_model" "evdev"
[    14.946] (**) Option "xkb_layout" "us"
[    14.947] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event0)
[    14.947] (**) A4Tech USB Mouse: Applying InputClass "evdev pointer catchall"
[    14.947] (II) Using input driver 'evdev' for 'A4Tech USB Mouse'
[    14.947] (**) A4Tech USB Mouse: always reports core events
[    14.947] (**) evdev: A4Tech USB Mouse: Device: "/dev/input/event0"
[    14.947] (--) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xa
[    14.947] (--) evdev: A4Tech USB Mouse: Found 12 mouse buttons
[    14.947] (--) evdev: A4Tech USB Mouse: Found scroll wheel(s)
[    14.947] (--) evdev: A4Tech USB Mouse: Found relative axes
[    14.947] (--) evdev: A4Tech USB Mouse: Found x and y relative axes
[    14.947] (II) evdev: A4Tech USB Mouse: Configuring as mouse
[    14.947] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support
[    14.947] (**) evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5
[    14.947] (**) evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    14.947] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input0/event0"
[    14.947] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE, id 8)
[    14.947] (II) evdev: A4Tech USB Mouse: initialized for relative axes.
[    14.947] (**) A4Tech USB Mouse: (accel) keeping acceleration scheme 1
[    14.947] (**) A4Tech USB Mouse: (accel) acceleration profile 0
[    14.947] (**) A4Tech USB Mouse: (accel) acceleration factor: 2.000
[    14.947] (**) A4Tech USB Mouse: (accel) acceleration threshold: 4
[    14.948] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse0)
[    14.948] (II) No input driver specified, ignoring this device.
[    14.948] (II) This device may have been added with another device file.
[    14.948] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event1)
[    14.948] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    14.948] (II) Using input driver 'evdev' for '  USB Keyboard'
[    14.948] (**)   USB Keyboard: always reports core events
[    14.948] (**) evdev:   USB Keyboard: Device: "/dev/input/event1"
[    14.948] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1503
[    14.948] (--) evdev:   USB Keyboard: Found keys
[    14.948] (II) evdev:   USB Keyboard: Configuring as keyboard
[    14.948] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
[    14.948] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 9)
[    14.948] (**) Option "xkb_rules" "evdev"
[    14.948] (**) Option "xkb_model" "evdev"
[    14.948] (**) Option "xkb_layout" "us"
[    14.949] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event2)
[    14.949] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    14.949] (II) Using input driver 'evdev' for '  USB Keyboard'
[    14.949] (**)   USB Keyboard: always reports core events
[    14.949] (**) evdev:   USB Keyboard: Device: "/dev/input/event2"
[    14.949] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1503
[    14.949] (--) evdev:   USB Keyboard: Found keys
[    14.949] (II) evdev:   USB Keyboard: Configuring as keyboard
[    14.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input2/event2"
[    14.949] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 10)
[    14.949] (**) Option "xkb_rules" "evdev"
[    14.949] (**) Option "xkb_model" "evdev"
[    14.949] (**) Option "xkb_layout" "us"
[    14.949] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    14.949] (II) No input driver specified, ignoring this device.
[    14.949] (II) This device may have been added with another device file.

Если запускать через systemctl start slim, то всегда работает нормально. Nouveau не вариант, я заядлый геймер.

vadik	# 11 лет, 8 месяцев назад
Темы: 57 Сообщения: 5495 Участник с: 17 августа 2009	Модель видеокарты озвучьте для начала.

vasek	# 11 лет, 8 месяцев назад
Темы: 47 Сообщения: 11859 Участник с: 17 февраля 2013	....удалил блуд.... Ошибки не исчезают с опытом - они просто умнеют

TANK	# 11 лет, 8 месяцев назад
Темы: 14 Сообщения: 51 Участник с: 12 января 2013	8600 GT, значения не имеет.

vadik	# 11 лет, 8 месяцев назад
Темы: 57 Сообщения: 5495 Участник с: 17 августа 2009	TANK 8600 GT, значения не имеет. Почему у меня эта карточка нормально работает со стандартным драйвером из репозитория? Наверное все-таки имеет значение? По существу: Откуда ставили драйвер? Какие настройки выполняли, какие файлы создавали/правили?

vadik

# 11 лет, 8 месяцев назад

Темы: 57

Сообщения: 5495

Участник с: 17 августа 2009

TANK
8600 GT, значения не имеет.

Почему у меня эта карточка нормально работает со стандартным драйвером из репозитория? Наверное все-таки имеет значение?

По существу:
Откуда ставили драйвер? Какие настройки выполняли, какие файлы создавали/правили?

TANK	# 11 лет, 8 месяцев назад
Темы: 14 Сообщения: 51 Участник с: 12 января 2013	Стоят linux-lts nvidia-lts nvidia-utils lib32-nvidia-utils. Выполнял только nvidia-xconfig, больше него не правил, кроме разрешения экрана. Переустановка системы не помогла.