Тормозит Arch

После выхода из ждущего режима и долгом uptime начинает тормозить Arch:

Вывод dmesg:


 1.222580] pci 0000:00:04.0: PCI bridge to [bus 02]
[    1.222583] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    1.222586] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    1.222633] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    1.222651] pci 0000:03:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
[    1.222739] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    1.232578] pci 0000:00:05.0: PCI bridge to [bus 03]
[    1.232581] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    1.232628] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[    1.232646] pci 0000:04:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit]
[    1.232735] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    1.242577] pci 0000:00:07.0: PCI bridge to [bus 04]
[    1.242580] pci 0000:00:07.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    1.242647] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[    1.242653] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    1.242654] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    1.242655] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    1.242656] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    1.242657] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    1.242658] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    1.242659] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    1.243013] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    1.243066] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    1.243120] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    1.243173] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
[    1.243217] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    1.243252] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    1.243286] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    1.243321] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    1.243423] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.243464] ACPI : EC: EC stopped
[    1.243477] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[    1.243477] ACPI : EC: EC started
[    1.243567] vgaarb: setting as boot device: PCI:0000:01:00.0
[    1.243568] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.243569] vgaarb: loaded
[    1.243570] vgaarb: bridge control possible 0000:01:00.0
[    1.249637] PCI: Using ACPI for IRQ routing
[    1.255976] PCI: pci_cache_line_size set to 64 bytes
[    1.256021] e820: reserve RAM buffer [mem 0xa6da5018-0xa7ffffff]
[    1.256022] e820: reserve RAM buffer [mem 0xa7e55018-0xa7ffffff]
[    1.256023] e820: reserve RAM buffer [mem 0xba9b9000-0xbbffffff]
[    1.256023] e820: reserve RAM buffer [mem 0xbca4f000-0xbfffffff]
[    1.256024] e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
[    1.256025] e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
[    1.256026] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[    1.256113] NetLabel: Initializing
[    1.256113] NetLabel:  domain hash size = 128
[    1.256113] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.256123] NetLabel:  unlabeled traffic allowed by default
[    1.256176] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.256178] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    1.259244] clocksource: Switched to clocksource hpet
[    1.265494] VFS: Disk quotas dquot_6.6.0
[    1.265507] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.265572] pnp: PnP ACPI init
[    1.265669] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    1.265672] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.265917] system 00:01: [io  0x040b] has been reserved
[    1.265918] system 00:01: [io  0x04d6] has been reserved
[    1.265919] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    1.265921] system 00:01: [io  0x0c14] has been reserved
[    1.265922] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    1.265923] system 00:01: [io  0x0c52] has been reserved
[    1.265925] system 00:01: [io  0x0c6c] has been reserved
[    1.265926] system 00:01: [io  0x0c6f] has been reserved
[    1.265927] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    1.265928] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    1.265929] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    1.265930] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    1.265931] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    1.265932] system 00:01: [io  0x0800-0x089f] has been reserved
[    1.265933] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    1.265934] system 00:01: [io  0x0900-0x090f] has been reserved
[    1.265935] system 00:01: [io  0x0910-0x091f] has been reserved
[    1.265937] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    1.265938] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.265940] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.265941] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    1.265942] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    1.265944] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    1.265945] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    1.265947] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[    1.265949] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.266076] system 00:02: [io  0x0290-0x02af] has been reserved
[    1.266078] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.266106] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.266161] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    1.266163] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.266204] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.266245] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.266370] pnp 00:07: [dma 0 disabled]
[    1.266411] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.266528] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.266618] system 00:09: [mem 0xfec20000-0xfec200ff] could not be reserved
[    1.266620] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.266724] pnp: PnP ACPI: found 10 devices
[    1.273357] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.273377] pci 0000:00:02.0: PCI bridge to [bus 01]
[    1.273378] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    1.273381] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    1.273382] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.273385] pci 0000:00:04.0: PCI bridge to [bus 02]
[    1.273386] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    1.273389] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    1.273391] pci 0000:00:05.0: PCI bridge to [bus 03]
[    1.273393] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    1.273396] pci 0000:00:07.0: PCI bridge to [bus 04]
[    1.273398] pci 0000:00:07.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    1.273402] pci 0000:00:14.4: PCI bridge to [bus 05]
[    1.273411] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    1.273412] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    1.273413] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    1.273414] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.273415] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.273416] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.273417] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    1.273418] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    1.273419] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    1.273420] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.273421] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    1.273422] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    1.273423] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[    1.273424] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
[    1.273425] pci_bus 0000:05: resource 4 [io  0x0000-0x03af window]
[    1.273426] pci_bus 0000:05: resource 5 [io  0x03e0-0x0cf7 window]
[    1.273427] pci_bus 0000:05: resource 6 [io  0x03b0-0x03df window]
[    1.273428] pci_bus 0000:05: resource 7 [io  0x0d00-0xffff window]
[    1.273429] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.273430] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.273431] pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff window]
[    1.273455] NET: Registered protocol family 2
[    1.273638] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.273888] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.274087] TCP: Hash tables configured (established 131072 bind 65536)
[    1.274125] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    1.274187] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    1.274276] NET: Registered protocol family 1
[    1.569451] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.569646] PCI: CLS 64 bytes, default 64
[    1.569684] Unpacking initramfs...
[    1.903933] Freeing initrd memory: 24152K (ffff88007e86a000 - ffff880080000000)
[    1.903936] PCI-DMA: Disabling AGP.
[    1.904011] PCI-DMA: aperture base @ a0000000 size 65536 KB
[    1.904011] PCI-DMA: using GART IOMMU.
[    1.904014] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.907227] perf: AMD NB counters detected
[    1.907427] LVT offset 0 assigned for vector 0x400
[    1.907504] perf: AMD IBS detected (0x000000ff)
[    1.907554] Scanning for low memory corruption every 60 seconds
[    1.907861] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.908147] Initialise system trusted keyrings
[    1.908269] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    1.909949] zbud: loaded
[    1.910473] Key type asymmetric registered
[    1.910537] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.910586] io scheduler noop registered
[    1.910587] io scheduler deadline registered
[    1.910594] io scheduler cfq registered (default)
[    1.910885] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.910889] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.910901] efifb: probing for efifb
[    1.910913] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[    1.910914] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    1.910915] efifb: scrolling: redraw
[    1.910916] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.912497] Console: switching to colour frame buffer device 128x48
[    1.914383] fb0: EFI VGA frame buffer device
[    1.915095] GHES: HEST is not enabled!
[    1.915151] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.935667] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.936060] Linux agpgart interface v0.103
[    1.936699] rtc_cmos 00:03: RTC can wake from S4
[    1.936796] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.936816] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.936993] ledtrig-cpu: registered to indicate activity on CPUs
[    1.937232] NET: Registered protocol family 10
[    1.937439] NET: Registered protocol family 17
[    1.937762] microcode: CPU0: patch_level=0x06000629
[    1.937769] microcode: CPU1: patch_level=0x06000629
[    1.937776] microcode: CPU2: patch_level=0x06000629
[    1.937783] microcode: CPU3: patch_level=0x06000629
[    1.937791] microcode: CPU4: patch_level=0x06000629
[    1.937797] microcode: CPU5: patch_level=0x06000629
[    1.937805] microcode: CPU6: patch_level=0x06000629
[    1.937809] microcode: CPU7: patch_level=0x06000629
[    1.937849] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba
[    1.937967] registered taskstats version 1
[    1.937968] Loading compiled-in X.509 certificates
[    1.937981] zswap: loaded using pool lzo/zbud
[    1.938433]   Magic number: 1:525:283
[    1.938511] rtc_cmos 00:03: setting system clock to 2017-01-18 14:15:50 UTC (1484748950)
[    1.938576] PM: Hibernation image not present or could not be loaded.
[    1.939601] Freeing unused kernel memory: 1256K (ffffffff81b08000 - ffffffff81c42000)
[    1.939602] Write protecting the kernel read-only data: 10240k
[    1.940207] Freeing unused kernel memory: 2044K (ffff880002601000 - ffff880002800000)
[    1.940505] Freeing unused kernel memory: 136K (ffff8800029de000 - ffff880002a00000)
[    1.948210] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[    1.948275] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[    1.949925] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.949966] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.951690] [drm] Initialized drm 1.1.0 20060810
[    1.951738] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.951752] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.951758] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.951959] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.951970] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.951975] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.958357] [drm] radeon kernel modesetting enabled.
[    1.959113] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    1.959114] fb: switching to radeondrmfb from EFI VGA
[    1.959134] Console: switching to colour dummy device 80x25
[    1.959455] [drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x1458:0x2556 0x00).
[    1.959463] [drm] register mmio base: 0xFEA00000
[    1.959463] [drm] register mmio size: 262144
[    1.959487] radeon 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
[    1.959522] ATOM BIOS: GV
[    1.959662] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.959663] radeon 0000:01:00.0: GTT: 32M 0x0000000040000000 - 0x0000000041FFFFFF
[    1.959664] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.959664] [drm] RAM width 128bits DDR
[    1.959715] [TTM] Zone  kernel: Available graphics memory: 8168382 kiB
[    1.959715] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.959716] [TTM] Initializing pool allocator
[    1.959722] [TTM] Initializing DMA pool allocator
[    1.959744] [drm] radeon: 1024M of VRAM memory ready
[    1.959744] [drm] radeon: 32M of GTT memory ready.
[    1.959751] [drm] Loading verde Microcode
[    1.959848] [drm] Internal thermal controller with fan control
[    1.959897] [drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0
[    1.966055] [drm] radeon: dpm initialized
[    1.967007] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[    1.967012] [drm] GART: num cpu pages 8192, num gpu pages 8192
[    1.967040] [drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0
[    1.967042] [drm] PCIE gen 2 link speeds already enabled
[    1.974957] [drm] PCIE GART of 32M enabled (table at 0x00000000001D6000).
[    1.975045] radeon 0000:01:00.0: WB enabled
[    1.975047] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880426d7dc00
[    1.975048] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880426d7dc04
[    1.975049] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880426d7dc08
[    1.975050] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880426d7dc0c
[    1.975051] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880426d7dc10
[    1.975302] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90002435a18
[    1.995428] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff880426d7dc18
[    1.995429] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff880426d7dc1c
[    1.995430] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.995430] [drm] Driver supports precise vblank timestamp query.
[    1.995431] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.995480] radeon 0000:01:00.0: radeon: using MSI.
[    1.995505] [drm] radeon: irq initialized.
[    2.513714] [drm] ring test on 0 succeeded in 1 usecs
[    2.513717] [drm] ring test on 1 succeeded in 1 usecs
[    2.513721] [drm] ring test on 2 succeeded in 1 usecs
[    2.513733] [drm] ring test on 3 succeeded in 9 usecs
[    2.513738] [drm] ring test on 4 succeeded in 3 usecs
[    2.690854] [drm] ring test on 5 succeeded in 2 usecs
[    2.690857] [drm] UVD initialized successfully.
[    2.800926] [drm] ring test on 6 succeeded in 20 usecs
[    2.800937] [drm] ring test on 7 succeeded in 3 usecs
[    2.800937] [drm] VCE initialized successfully.
[    2.801114] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.801143] [drm] ib test on ring 1 succeeded in 0 usecs
[    2.801168] [drm] ib test on ring 2 succeeded in 0 usecs
[    2.801215] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.801356] [drm] ib test on ring 4 succeeded in 0 usecs
[    2.929246] tsc: Refined TSC clocksource calibration: 3612.071 MHz
[    2.929261] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3410ddceba6, max_idle_ns: 440795209811 ns
[    3.462768] [drm] ib test on ring 5 succeeded
[    3.942896] clocksource: Switched to clocksource tsc
[    3.969433] [drm] ib test on ring 6 succeeded
[    4.476088] [drm] ib test on ring 7 succeeded
[    4.476751] [drm] Radeon Display Connectors
[    4.476752] [drm] Connector 0:
[    4.476752] [drm]   DP-1
[    4.476753] [drm]   HPD2
[    4.476754] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    4.476754] [drm]   Encoders:
[    4.476754] [drm]     DFP1: INTERNAL_UNIPHY2
[    4.476755] [drm] Connector 1:
[    4.476755] [drm]   DP-2
[    4.476756] [drm]   HPD3
[    4.476757] [drm]   DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[    4.476757] [drm]   Encoders:
[    4.476757] [drm]     DFP2: INTERNAL_UNIPHY2
[    4.476758] [drm] Connector 2:
[    4.476758] [drm]   HDMI-A-1
[    4.476758] [drm]   HPD1
[    4.476759] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    4.476760] [drm]   Encoders:
[    4.476760] [drm]     DFP3: INTERNAL_UNIPHY1
[    4.476760] [drm] Connector 3:
[    4.476761] [drm]   DVI-I-1
[    4.476761] [drm]   HPD4
[    4.476762] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[    4.476762] [drm]   Encoders:
[    4.476763] [drm]     DFP4: INTERNAL_UNIPHY
[    4.476763] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    4.841405] [drm] fb mappable at 0xC01E9000
[    4.841406] [drm] vram apper at 0xC0000000
[    4.841406] [drm] size 8294400
[    4.841407] [drm] fb depth is 24
[    4.841407] [drm]    pitch is 7680
[    4.841568] fbcon: radeondrmfb (fb0) is primary device
[    4.864231] Console: switching to colour frame buffer device 240x67
[    4.868920] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    4.896461] [drm] Initialized radeon 2.46.0 20080528 for 0000:01:00.0 on minor 0
[    4.929598] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    4.929599] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    4.929801] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.936372] ACPI: bus type USB registered
[    4.936442] usbcore: registered new interface driver usbfs
[    4.936452] usbcore: registered new interface driver hub
[    4.936493] usbcore: registered new device driver usb
[    4.936545] SCSI subsystem initialized
[    4.937056] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.937269] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.937270] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    4.937548] ehci-pci: EHCI PCI platform driver
[    4.937667] QUIRK: Enable AMD PLL fix
[    4.937690] ehci-pci 0000:00:12.2: EHCI Host Controller
[    4.937695] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    4.937702] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    4.937709] ehci-pci 0000:00:12.2: debug port 1
[    4.937757] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[    4.938964] libata version 3.00 loaded.
[    4.952587] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    4.952751] hub 1-0:1.0: USB hub found
[    4.952757] hub 1-0:1.0: 5 ports detected
[    4.952903] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    4.952911] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    4.971452] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    5.012248] xhci_hcd 0000:03:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    5.012588] hub 2-0:1.0: USB hub found
[    5.012595] hub 2-0:1.0: 2 ports detected
[    5.012706] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    5.012709] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[    5.012722] ehci-pci 0000:00:13.2: EHCI Host Controller
[    5.012731] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.012851] hub 3-0:1.0: USB hub found
[    5.012858] hub 3-0:1.0: 2 ports detected
[    5.012953] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    5.012957] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.012967] ehci-pci 0000:00:13.2: debug port 1
[    5.013000] ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
[    5.025995] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    5.026252] hub 4-0:1.0: USB hub found
[    5.026257] hub 4-0:1.0: 5 ports detected
[    5.026446] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    5.026454] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
[    5.138268] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[    5.138592] hub 5-0:1.0: USB hub found
[    5.138598] hub 5-0:1.0: 2 ports detected
[    5.138734] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    5.138737] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6
[    5.138749] ehci-pci 0000:00:16.2: EHCI Host Controller
[    5.138758] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.138876] hub 6-0:1.0: USB hub found
[    5.138883] hub 6-0:1.0: 2 ports detected
[    5.138979] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
[    5.138982] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.138990] ehci-pci 0000:00:16.2: debug port 1
[    5.139029] ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
[    5.149312] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    5.149471] hub 7-0:1.0: USB hub found
[    5.149478] hub 7-0:1.0: 4 ports detected
[    5.149654] ahci 0000:00:11.0: version 3.0
[    5.149798] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x20 impl SATA mode
[    5.149800] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    5.150037] ohci-pci: OHCI PCI platform driver
[    5.150807] scsi host0: ahci
[    5.150927] scsi host1: ahci
[    5.151018] scsi host2: ahci
[    5.151107] scsi host3: ahci
[    5.151197] scsi host4: ahci
[    5.151290] scsi host5: ahci
[    5.151343] ata1: DUMMY
[    5.151344] ata2: DUMMY
[    5.151345] ata3: DUMMY
[    5.151346] ata4: DUMMY
[    5.151346] ata5: DUMMY
[    5.151348] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b380 irq 19
[    5.151457] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    5.151462] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
[    5.151483] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[    5.210229] hub 8-0:1.0: USB hub found
[    5.210236] hub 8-0:1.0: 5 ports detected
[    5.210464] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    5.210468] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
[    5.210487] ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000
[    5.270275] hub 9-0:1.0: USB hub found
[    5.270283] hub 9-0:1.0: 5 ports detected
[    5.270488] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    5.270494] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
[    5.270509] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[    5.330256] hub 10-0:1.0: USB hub found
[    5.330264] hub 10-0:1.0: 2 ports detected
[    5.330433] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    5.330437] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
[    5.330456] ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000
[    5.390222] hub 11-0:1.0: USB hub found
[    5.390229] hub 11-0:1.0: 4 ports detected
[    5.539310] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    5.555978] usb 8-1: new full-speed USB device number 2 using ohci-pci
[    5.569621] usb 6-2: new SuperSpeed USB device number 2 using xhci_hcd
[    5.588917] usb-storage 6-2:1.0: USB Mass Storage device detected
[    5.589000] scsi host6: usb-storage 6-2:1.0
[    5.589063] usbcore: registered new interface driver usb-storage
[    5.589342] usbcore: registered new interface driver uas
[    5.622568] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.624645] ata6.00: ATA-8: WDC WD5000AAKX-08ERMA0, 19.01H19, max UDMA/100
[    5.624647] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.625894] ata6.00: configured for UDMA/100
[    5.626149] scsi 5:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 1H19 PQ: 0 ANSI: 5
[    5.666086] sd 5:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    5.666160] sd 5:0:0:0: [sda] Write Protect is off
[    5.666161] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.666189] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.721977]  sda: sda1 sda2 sda4 sda5 sda7
[    5.722438] sd 5:0:0:0: [sda] Attached SCSI disk
[    5.733450] hidraw: raw HID events driver (C) Jiri Kosina
[    5.735915] usb 7-4: new high-speed USB device number 3 using ehci-pci
[    5.735919] usb 11-3: new full-speed USB device number 2 using ohci-pci
[    5.736149] usbcore: registered new interface driver usbhid
[    5.736150] usbhid: USB HID core driver
[    5.738101] input: C-Media Electronics Inc.       USB PnP Sound Device as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.3/0003:0D8C:013C.0001/input/input1
[    5.792694] hid-generic 0003:0D8C:013C.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc.       USB PnP Sound Device] on usb-0000:00:12.0-1/input3
[    5.799211] usb 1-3: new high-speed USB device number 4 using ehci-pci
[    5.874847] usb-storage 7-4:1.0: USB Mass Storage device detected
[    5.874947] scsi host7: usb-storage 7-4:1.0
[    5.924436] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:16.0/usb11/11-3/11-3:1.0/0003:046D:C52F.0002/input/input2
[    5.924550] hid-generic 0003:046D:C52F.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:16.0-3/input0
[    5.932330] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:16.0/usb11/11-3/11-3:1.1/0003:046D:C52F.0003/input/input3
[    5.986504] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:16.0-3/input1
[    6.262457] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    6.282642] usb 8-4: new low-speed USB device number 3 using ohci-pci
[    6.316924] random: fast init done
[    6.470495] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:12.0/usb8/8-4/8-4:1.0/0003:046D:C069.0004/input/input4
[    6.470629] hid-generic 0003:046D:C069.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:12.0-4/input0
[    6.609604] scsi 6:0:0:0: Direct-Access     Innostor Innostor         1.00 PQ: 0 ANSI: 6
[    6.610026] sd 6:0:0:0: [sdb] 247463936 512-byte logical blocks: (127 GB/118 GiB)
[    6.610146] sd 6:0:0:0: [sdb] Write Protect is off
[    6.610148] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    6.610273] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[    6.611575]  sdb: sdb1
[    6.612370] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    6.877019] scsi 7:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
[    6.878812] sd 7:0:0:0: [sdc] 15138816 512-byte logical blocks: (7.75 GB/7.22 GiB)
[    6.879439] sd 7:0:0:0: [sdc] Write Protect is off
[    6.879440] sd 7:0:0:0: [sdc] Mode Sense: 45 00 00 00
[    6.880148] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    6.902481]  sdc: sdc1
[    6.905754] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[    7.068950] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.140924] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    7.141109] systemd[1]: Detected architecture x86-64.
[    7.173667] systemd[1]: Set hostname to <sergeyM>.
[    7.745597] random: crng init done
[    8.147037] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.147156] systemd[1]: Listening on Journal Socket.
[    8.147235] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.147313] systemd[1]: Listening on udev Control Socket.
[    8.147388] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.147742] systemd[1]: Created slice User and Session Slice.
[    8.147814] systemd[1]: Listening on LVM2 metadata daemon socket.
[    8.572172] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[    8.774088] systemd-journald[242]: Received request to flush runtime journal from PID 1
[    9.961676] acpi_cpufreq: overriding BIOS provided _PSD data
[   10.136853] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.138233] wmi: Mapper loaded
[   10.168137] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[   10.168142] ACPI: Power Button [PWRB]
[   10.168219] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   10.168221] ACPI: Power Button [PWRF]
[   10.192822] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   10.192828] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[   10.192955] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   10.203732] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   10.203783] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
[   10.203785] sp5100_tco: I/O address 0x0cd6 already in use
[   10.267394] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[   10.304594] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   10.433989] AVX version of gcm_enc/dec engaged.
[   10.433991] AES CTR mode by8 optimization enabled
[   10.474318] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   10.474331] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   10.475179] r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffc90001c08000, 60:a4:4c:2b:3e:f9, XID 08000800 IRQ 47
[   10.475181] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   10.795871] kvm: Nested Virtualization enabled
[   10.795876] kvm: Nested Paging enabled
[   10.856914] r8169 0000:02:00.0 enp2s0: renamed from eth0
[   10.982941] asus_wmi: ASUS WMI generic driver loaded
[   10.984104] asus_wmi: Initialization: 0x0
[   10.984159] asus_wmi: BIOS WMI version: 0.9
[   10.984245] asus_wmi: SFUN value: 0x0
[   10.985012] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
[   10.985229] asus_wmi: Number of fans: 1
[   12.155991] mousedev: PS/2 mouse device common for all mice
[   12.182862] usblp 1-2:1.0: usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0045
[   12.182894] usbcore: registered new interface driver usblp
[   12.220322] media: Linux media interface: v0.10
[   12.415608] Linux video capture interface: v2.00
[   12.677986] fuse init (API version 7.25)
[   12.783721] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (0c45:6300)
[   12.791841] uvcvideo 1-3:1.0: Entity type for entity Extension 5 was not initialized!
[   12.791846] uvcvideo 1-3:1.0: Entity type for entity Extension 4 was not initialized!
[   12.791849] uvcvideo 1-3:1.0: Entity type for entity Processing 3 was not initialized!
[   12.791852] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[   12.791999] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input9
[   12.792108] usbcore: registered new interface driver uvcvideo
[   12.792109] USB Video Class driver (1.1.1)
[   12.925575] usbcore: registered new interface driver snd-usb-audio
[   13.013341] EXT4-fs (sda5): mounting ext2 file system using the ext4 subsystem
[   13.130740] EXT4-fs (sda5): mounted filesystem without journal. Opts: block_validity,barrier,user_xattr,acl
[   13.817523] EXT4-fs (sda7): mounting ext2 file system using the ext4 subsystem
[   14.837039] EXT4-fs (sda7): mounted filesystem without journal. Opts: block_validity,barrier,user_xattr,acl
[   16.302840] microcode: CPU0: new patch_level=0x0600063d
[   16.317658] microcode: CPU2: new patch_level=0x0600063d
[   16.332513] microcode: CPU4: new patch_level=0x0600063d
[   16.337845] microcode: CPU6: new patch_level=0x0600063d
[   17.208807] r8169 0000:02:00.0 enp2s0: link down
[   17.208894] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   18.812677] r8169 0000:02:00.0 enp2s0: link up
[   18.812691] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 3718.414187] ata6.00: exception Emask 0x10 SAct 0x7fc00 SErr 0x0 action 0x6 frozen
[ 3718.414195] ata6.00: irq_stat 0x08000000, interface fatal error
[ 3718.414201] ata6.00: failed command: WRITE FPDMA QUEUED
[ 3718.414211] ata6.00: cmd 61/00:50:98:cd:95/08:00:29:00:00/40 tag 10 ncq dma 1048576 ou
                        res 40/00:94:18:4b:9d/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 3718.414217] ata6.00: status: { DRDY }
[ 3718.414221] ata6.00: failed command: WRITE FPDMA QUEUED
[ 3718.414229] ata6.00: cmd 61/70:58:00:18:96/03:00:29:00:00/40 tag 11 ncq dma 450560 out
                        res 40/00:94:18:4b:9d/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 3718.414234] ata6.00: status: { DRDY }
[ 3718.414237] ata6.00: failed command: WRITE FPDMA QUEUED
[ 3718.414246] ata6.00: cmd 61/08:60:00:28:65/00:00:2b:00:00/40 tag 12 ncq dma 4096 out
                        res 40/00:94:18:4b:9d/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 3718.414250] ata6.00: status: { DRDY }
[ 3718.414253] ata6.00: failed command: WRITE FPDMA QUEUED
[ 3718.414261] ata6.00: cmd 61/08:68:78:40:65/00:00:2b:00:00/40 tag 13 ncq dma 4096 out
                        res 40/00:94:18:4b:9d/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 3718.414266] ata6.00: status: { DRDY }
[ 3718.414269] ata6.00: failed command: WRITE FPDMA QUEUED
[ 3718.414277] ata6.00: cmd 61/80:70:40:18:69/00:00:2b:00:00/40 tag 14 ncq dma 65536 out
                        res 40/00:94:18:4b:9d/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 3718.414282] ata6.00: status: { DRDY }
[ 3718.414285] ata6.00: failed command: WRITE FPDMA QUEUED
[ 3718.414293] ata6.00: cmd 61/10:78:08:28:9d/00:00:2b:00:00/40 tag 15 ncq dma 8192 out
                        res 40/00:94:18:4b:9d/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 3718.414298] ata6.00: status: { DRDY }
[ 3718.414301] ata6.00: failed command: WRITE FPDMA QUEUED
[ 3718.414309] ata6.00: cmd 61/08:80:88:28:9d/00:00:2b:00:00/40 tag 16 ncq dma 4096 out
                        res 40/00:94:18:4b:9d/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 3718.414314] ata6.00: status: { DRDY }
[ 3718.414317] ata6.00: failed command: WRITE FPDMA QUEUED
[ 3718.414325] ata6.00: cmd 61/10:88:d8:2a:9d/00:00:2b:00:00/40 tag 17 ncq dma 8192 out
                        res 40/00:94:18:4b:9d/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 3718.414329] ata6.00: status: { DRDY }
[ 3718.414333] ata6.00: failed command: WRITE FPDMA QUEUED
[ 3718.414341] ata6.00: cmd 61/08:90:18:4b:9d/00:00:2b:00:00/40 tag 18 ncq dma 4096 out
                        res 40/00:94:18:4b:9d/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 3718.414345] ata6.00: status: { DRDY }
[ 3718.414351] ata6: hard resetting link
[ 3718.904112] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3718.906802] ata6.00: configured for UDMA/100
[ 3718.906847] ata6: EH complete
[ 4052.280655] ata6.00: exception Emask 0x10 SAct 0x7ffffdff SErr 0x400000 action 0x6 frozen
[ 4052.280663] ata6.00: irq_stat 0x08000000, interface fatal error
[ 4052.280668] ata6: SError: { Handshk }
[ 4052.280673] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280682] ata6.00: cmd 61/08:00:98:a9:5c/00:00:2b:00:00/40 tag 0 ncq dma 4096 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280688] ata6.00: status: { DRDY }
[ 4052.280692] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280700] ata6.00: cmd 61/38:08:10:af:5c/00:00:2b:00:00/40 tag 1 ncq dma 28672 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280705] ata6.00: status: { DRDY }
[ 4052.280708] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280717] ata6.00: cmd 61/40:10:e8:af:8e/00:00:2b:00:00/40 tag 2 ncq dma 32768 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280721] ata6.00: status: { DRDY }
[ 4052.280725] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280733] ata6.00: cmd 61/08:18:60:e6:a2/00:00:2b:00:00/40 tag 3 ncq dma 4096 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280738] ata6.00: status: { DRDY }
[ 4052.280741] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280749] ata6.00: cmd 61/10:20:80:e6:a2/00:00:2b:00:00/40 tag 4 ncq dma 8192 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280754] ata6.00: status: { DRDY }
[ 4052.280757] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280765] ata6.00: cmd 61/08:28:00:e8:93/00:00:15:00:00/40 tag 5 ncq dma 4096 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280770] ata6.00: status: { DRDY }
[ 4052.280773] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280781] ata6.00: cmd 61/c0:30:80:42:9d/00:00:28:00:00/40 tag 6 ncq dma 98304 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280786] ata6.00: status: { DRDY }
[ 4052.280789] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280797] ata6.00: cmd 61/40:38:80:d4:9d/00:00:28:00:00/40 tag 7 ncq dma 32768 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280802] ata6.00: status: { DRDY }
[ 4052.280805] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280814] ata6.00: cmd 61/88:40:00:67:8d/00:00:29:00:00/40 tag 8 ncq dma 69632 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280818] ata6.00: status: { DRDY }
[ 4052.280822] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280830] ata6.00: cmd 61/48:50:48:7a:99/05:00:29:00:00/40 tag 10 ncq dma 692224 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280835] ata6.00: status: { DRDY }
[ 4052.280838] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280847] ata6.00: cmd 61/b8:58:90:7f:99/02:00:29:00:00/40 tag 11 ncq dma 356352 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280851] ata6.00: status: { DRDY }
[ 4052.280855] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280863] ata6.00: cmd 61/00:60:00:a0:99/04:00:29:00:00/40 tag 12 ncq dma 524288 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280867] ata6.00: status: { DRDY }
[ 4052.280871] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280879] ata6.00: cmd 61/70:68:00:88:9a/03:00:29:00:00/40 tag 13 ncq dma 450560 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280883] ata6.00: status: { DRDY }
[ 4052.280887] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280895] ata6.00: cmd 61/38:70:28:c8:67/00:00:2b:00:00/40 tag 14 ncq dma 28672 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280900] ata6.00: status: { DRDY }
[ 4052.280903] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280911] ata6.00: cmd 61/40:78:a8:af:8e/00:00:2b:00:00/40 tag 15 ncq dma 32768 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280916] ata6.00: status: { DRDY }
[ 4052.280919] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280927] ata6.00: cmd 61/80:80:e0:ed:8e/00:00:2b:00:00/40 tag 16 ncq dma 65536 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280932] ata6.00: status: { DRDY }
[ 4052.280935] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280943] ata6.00: cmd 61/40:88:a0:83:9b/00:00:2b:00:00/40 tag 17 ncq dma 32768 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280948] ata6.00: status: { DRDY }
[ 4052.280951] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280959] ata6.00: cmd 61/48:90:18:e6:a2/00:00:2b:00:00/40 tag 18 ncq dma 36864 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280964] ata6.00: status: { DRDY }
[ 4052.280968] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280976] ata6.00: cmd 61/08:98:48:66:8b/00:00:15:00:00/40 tag 19 ncq dma 4096 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280980] ata6.00: status: { DRDY }
[ 4052.280984] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.280992] ata6.00: cmd 61/08:a0:50:5e:8e/00:00:15:00:00/40 tag 20 ncq dma 4096 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.280996] ata6.00: status: { DRDY }
[ 4052.281000] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.281008] ata6.00: cmd 61/08:a8:18:be:59/00:00:17:00:00/40 tag 21 ncq dma 4096 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.281012] ata6.00: status: { DRDY }
[ 4052.281016] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.281024] ata6.00: cmd 61/10:b0:58:be:59/00:00:17:00:00/40 tag 22 ncq dma 8192 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.281028] ata6.00: status: { DRDY }
[ 4052.281032] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.281040] ata6.00: cmd 61/08:b8:50:c1:59/00:00:17:00:00/40 tag 23 ncq dma 4096 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.281044] ata6.00: status: { DRDY }
[ 4052.281048] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.281056] ata6.00: cmd 61/80:c0:80:b2:85/00:00:29:00:00/40 tag 24 ncq dma 65536 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.281060] ata6.00: status: { DRDY }
[ 4052.281064] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.281072] ata6.00: cmd 61/00:c8:f8:3e:89/02:00:29:00:00/40 tag 25 ncq dma 262144 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.281077] ata6.00: status: { DRDY }
[ 4052.281080] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.281088] ata6.00: cmd 61/00:d0:00:45:89/01:00:29:00:00/40 tag 26 ncq dma 131072 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.281093] ata6.00: status: { DRDY }
[ 4052.281096] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.281104] ata6.00: cmd 61/88:d8:00:6c:89/00:00:29:00:00/40 tag 27 ncq dma 69632 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.281109] ata6.00: status: { DRDY }
[ 4052.281112] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.281120] ata6.00: cmd 61/40:e0:48:4e:99/00:00:29:00:00/40 tag 28 ncq dma 32768 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.281125] ata6.00: status: { DRDY }
[ 4052.281128] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.281136] ata6.00: cmd 61/08:e8:a0:2a:3c/00:00:2b:00:00/40 tag 29 ncq dma 4096 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.281141] ata6.00: status: { DRDY }
[ 4052.281144] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4052.281152] ata6.00: cmd 61/08:f0:a8:ae:40/00:00:2b:00:00/40 tag 30 ncq dma 4096 out
                        res 40/00:34:80:42:9d/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[ 4052.281157] ata6.00: status: { DRDY }
[ 4052.281162] ata6: hard resetting link
[ 4052.750522] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4052.753181] ata6.00: configured for UDMA/100
[ 4052.753449] ata6: EH complete
[ 4089.827199] ata6.00: exception Emask 0x10 SAct 0x7ffffff8 SErr 0x400000 action 0x6 frozen
[ 4089.827208] ata6.00: irq_stat 0x08000000, interface fatal error
[ 4089.827212] ata6: SError: { Handshk }
[ 4089.827217] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827225] ata6.00: cmd 61/88:18:00:6c:89/00:00:29:00:00/40 tag 3 ncq dma 69632 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827230] ata6.00: status: { DRDY }
[ 4089.827233] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827241] ata6.00: cmd 61/38:20:10:af:5c/00:00:2b:00:00/40 tag 4 ncq dma 28672 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827245] ata6.00: status: { DRDY }
[ 4089.827248] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827254] ata6.00: cmd 61/80:28:a8:af:8e/00:00:2b:00:00/40 tag 5 ncq dma 65536 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827258] ata6.00: status: { DRDY }
[ 4089.827261] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827267] ata6.00: cmd 61/08:30:00:2d:99/00:00:2b:00:00/40 tag 6 ncq dma 4096 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827271] ata6.00: status: { DRDY }
[ 4089.827275] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827289] ata6.00: cmd 61/08:38:10:2d:99/00:00:2b:00:00/40 tag 7 ncq dma 4096 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827292] ata6.00: status: { DRDY }
[ 4089.827293] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827297] ata6.00: cmd 61/10:40:08:28:9d/00:00:2b:00:00/40 tag 8 ncq dma 8192 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827300] ata6.00: status: { DRDY }
[ 4089.827301] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827306] ata6.00: cmd 61/08:48:88:28:9d/00:00:2b:00:00/40 tag 9 ncq dma 4096 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827308] ata6.00: status: { DRDY }
[ 4089.827310] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827314] ata6.00: cmd 61/48:50:18:e6:a2/00:00:2b:00:00/40 tag 10 ncq dma 36864 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827317] ata6.00: status: { DRDY }
[ 4089.827319] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827323] ata6.00: cmd 61/08:58:60:e6:a2/00:00:2b:00:00/40 tag 11 ncq dma 4096 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827325] ata6.00: status: { DRDY }
[ 4089.827327] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827331] ata6.00: cmd 61/10:60:80:e6:a2/00:00:2b:00:00/40 tag 12 ncq dma 8192 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827334] ata6.00: status: { DRDY }
[ 4089.827335] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827339] ata6.00: cmd 61/08:68:00:e8:93/00:00:15:00:00/40 tag 13 ncq dma 4096 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827342] ata6.00: status: { DRDY }
[ 4089.827344] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827348] ata6.00: cmd 61/80:70:80:39:99/00:00:29:00:00/40 tag 14 ncq dma 65536 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827350] ata6.00: status: { DRDY }
[ 4089.827352] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827356] ata6.00: cmd 61/00:78:00:40:99/01:00:29:00:00/40 tag 15 ncq dma 131072 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827359] ata6.00: status: { DRDY }
[ 4089.827360] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827365] ata6.00: cmd 61/80:80:80:41:99/01:00:29:00:00/40 tag 16 ncq dma 196608 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827367] ata6.00: status: { DRDY }
[ 4089.827369] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827374] ata6.00: cmd 61/00:88:00:48:99/02:00:29:00:00/40 tag 17 ncq dma 262144 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827376] ata6.00: status: { DRDY }
[ 4089.827378] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827382] ata6.00: cmd 61/00:90:00:5e:99/02:00:29:00:00/40 tag 18 ncq dma 262144 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827384] ata6.00: status: { DRDY }
[ 4089.827386] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827390] ata6.00: cmd 61/40:98:00:8c:99/05:00:29:00:00/40 tag 19 ncq dma 688128 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827392] ata6.00: status: { DRDY }
[ 4089.827394] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827399] ata6.00: cmd 61/c0:a0:40:91:99/02:00:29:00:00/40 tag 20 ncq dma 360448 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827401] ata6.00: status: { DRDY }
[ 4089.827403] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827407] ata6.00: cmd 61/00:a8:00:b0:99/04:00:29:00:00/40 tag 21 ncq dma 524288 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827409] ata6.00: status: { DRDY }
[ 4089.827411] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827415] ata6.00: cmd 61/c0:b0:88:7f:99/02:00:29:00:00/40 tag 22 ncq dma 360448 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827418] ata6.00: status: { DRDY }
[ 4089.827420] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827424] ata6.00: cmd 61/40:b8:48:7a:99/05:00:29:00:00/40 tag 23 ncq dma 688128 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827426] ata6.00: status: { DRDY }
[ 4089.827428] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827432] ata6.00: cmd 61/00:c0:00:50:99/04:00:29:00:00/40 tag 24 ncq dma 524288 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827435] ata6.00: status: { DRDY }
[ 4089.827436] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827440] ata6.00: cmd 61/78:c8:00:58:9a/03:00:29:00:00/40 tag 25 ncq dma 454656 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827443] ata6.00: status: { DRDY }
[ 4089.827445] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827449] ata6.00: cmd 61/40:d0:00:88:9a/05:00:29:00:00/40 tag 26 ncq dma 688128 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827451] ata6.00: status: { DRDY }
[ 4089.827453] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827457] ata6.00: cmd 61/08:d8:a0:2a:3c/00:00:2b:00:00/40 tag 27 ncq dma 4096 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827459] ata6.00: status: { DRDY }
[ 4089.827461] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827465] ata6.00: cmd 61/80:e0:98:5d:66/00:00:2b:00:00/40 tag 28 ncq dma 65536 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827467] ata6.00: status: { DRDY }
[ 4089.827469] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827473] ata6.00: cmd 61/80:e8:78:d6:8e/00:00:2b:00:00/40 tag 29 ncq dma 65536 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827475] ata6.00: status: { DRDY }
[ 4089.827477] ata6.00: failed command: WRITE FPDMA QUEUED
[ 4089.827482] ata6.00: cmd 61/40:f0:a0:83:9b/00:00:2b:00:00/40 tag 30 ncq dma 32768 out
                        res 40/00:f4:a0:83:9b/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[ 4089.827484] ata6.00: status: { DRDY }
[ 4089.827488] ata6: hard resetting link
[ 4090.297146] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4090.299601] ata6.00: configured for UDMA/100
[ 4090.299734] ata6: EH complete
[20684.850382] ata6.00: exception Emask 0x10 SAct 0x1f00 SErr 0x400000 action 0x6 frozen
[20684.850418] ata6.00: irq_stat 0x08000000, interface fatal error
[20684.850423] ata6: SError: { Handshk }
[20684.850428] ata6.00: failed command: WRITE FPDMA QUEUED
[20684.850437] ata6.00: cmd 61/80:40:80:42:8d/00:00:29:00:00/40 tag 8 ncq dma 65536 out
                        res 40/00:64:00:48:ba/00:00:29:00:00/40 Emask 0x10 (ATA bus error)
[20684.850443] ata6.00: status: { DRDY }
[20684.850447] ata6.00: failed command: WRITE FPDMA QUEUED
[20684.850456] ata6.00: cmd 61/08:48:00:67:8d/00:00:29:00:00/40 tag 9 ncq dma 4096 out
                        res 40/00:64:00:48:ba/00:00:29:00:00/40 Emask 0x10 (ATA bus error)
[20684.850461] ata6.00: status: { DRDY }
[20684.850464] ata6.00: failed command: WRITE FPDMA QUEUED
[20684.850473] ata6.00: cmd 61/00:50:00:98:b9/04:00:29:00:00/40 tag 10 ncq dma 524288 out
                        res 40/00:64:00:48:ba/00:00:29:00:00/40 Emask 0x10 (ATA bus error)
[20684.850478] ata6.00: status: { DRDY }
[20684.850482] ata6.00: failed command: WRITE FPDMA QUEUED
[20684.850490] ata6.00: cmd 61/00:58:b8:cf:b9/08:00:29:00:00/40 tag 11 ncq dma 1048576 ou
                        res 40/00:64:00:48:ba/00:00:29:00:00/40 Emask 0x10 (ATA bus error)
[20684.850495] ata6.00: status: { DRDY }
[20684.850499] ata6.00: failed command: WRITE FPDMA QUEUED
[20684.850507] ata6.00: cmd 61/98:60:00:48:ba/05:00:29:00:00/40 tag 12 ncq dma 733184 out
                        res 40/00:64:00:48:ba/00:00:29:00:00/40 Emask 0x10 (ATA bus error)
[20684.850511] ata6.00: status: { DRDY }
[20684.850518] ata6: hard resetting link
[20685.320247] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[20685.323005] ata6.00: configured for UDMA/100
[20685.323074] ata6: EH complete
[20770.747108] ata6.00: exception Emask 0x10 SAct 0x3f000000 SErr 0x400000 action 0x6 frozen
[20770.747112] ata6.00: irq_stat 0x08000000, interface fatal error
[20770.747114] ata6: SError: { Handshk }
[20770.747117] ata6.00: failed command: WRITE FPDMA QUEUED
[20770.747121] ata6.00: cmd 61/40:c0:48:84:8f/00:00:2b:00:00/40 tag 24 ncq dma 32768 out
                        res 40/00:ec:48:33:ba/00:00:29:00:00/40 Emask 0x10 (ATA bus error)
[20770.747124] ata6.00: status: { DRDY }
[20770.747126] ata6.00: failed command: WRITE FPDMA QUEUED
[20770.747130] ata6.00: cmd 61/00:c8:68:f2:b9/02:00:29:00:00/40 tag 25 ncq dma 262144 out
                        res 40/00:ec:48:33:ba/00:00:29:00:00/40 Emask 0x10 (ATA bus error)
[20770.747133] ata6.00: status: { DRDY }
[20770.747134] ata6.00: failed command: WRITE FPDMA QUEUED
[20770.747138] ata6.00: cmd 61/80:d0:80:03:ba/00:00:29:00:00/40 tag 26 ncq dma 65536 out
                        res 40/00:ec:48:33:ba/00:00:29:00:00/40 Emask 0x10 (ATA bus error)
[20770.747140] ata6.00: status: { DRDY }
[20770.747142] ata6.00: failed command: WRITE FPDMA QUEUED
[20770.747146] ata6.00: cmd 61/00:d8:00:08:ba/04:00:29:00:00/40 tag 27 ncq dma 524288 out
                        res 40/00:ec:48:33:ba/00:00:29:00:00/40 Emask 0x10 (ATA bus error)
[20770.747148] ata6.00: status: { DRDY }
[20770.747149] ata6.00: failed command: WRITE FPDMA QUEUED
[20770.747152] ata6.00: cmd 61/00:e0:00:16:ba/01:00:29:00:00/40 tag 28 ncq dma 131072 out
                        res 40/00:ec:48:33:ba/00:00:29:00:00/40 Emask 0x10 (ATA bus error)
[20770.747154] ata6.00: status: { DRDY }
[20770.747156] ata6.00: failed command: WRITE FPDMA QUEUED
[20770.747159] ata6.00: cmd 61/f0:e8:48:33:ba/02:00:29:00:00/40 tag 29 ncq dma 385024 out
                        res 40/00:ec:48:33:ba/00:00:29:00:00/40 Emask 0x10 (ATA bus error)
[20770.747161] ata6.00: status: { DRDY }
[20770.747164] ata6: hard resetting link
[20771.217236] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[20771.220002] ata6.00: configured for UDMA/100
[20771.220078] ata6: EH complete
[20978.924412] ata6.00: exception Emask 0x10 SAct 0x1c0 SErr 0x400000 action 0x6 frozen
[20978.924417] ata6.00: irq_stat 0x08000008, interface fatal error
[20978.924421] ata6: SError: { Handshk }
[20978.924425] ata6.00: failed command: WRITE FPDMA QUEUED
[20978.924431] ata6.00: cmd 61/40:30:40:ff:9d/00:00:28:00:00/40 tag 6 ncq dma 32768 out
                        res 40/00:44:40:26:9e/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[20978.924434] ata6.00: status: { DRDY }
[20978.924437] ata6.00: failed command: WRITE FPDMA QUEUED
[20978.924443] ata6.00: cmd 61/40:38:00:04:9e/00:00:28:00:00/40 tag 7 ncq dma 32768 out
                        res 40/00:44:40:26:9e/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[20978.924446] ata6.00: status: { DRDY }
[20978.924448] ata6.00: failed command: WRITE FPDMA QUEUED
[20978.924453] ata6.00: cmd 61/80:40:40:26:9e/00:00:28:00:00/40 tag 8 ncq dma 65536 out
                        res 40/00:44:40:26:9e/00:00:28:00:00/40 Emask 0x10 (ATA bus error)
[20978.924456] ata6.00: status: { DRDY }
[20978.924461] ata6: hard resetting link
[20979.397694] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[20979.400504] ata6.00: configured for UDMA/100
[20979.400541] ata6: EH complete
[21165.708347] ata6: limiting SATA link speed to 3.0 Gbps
[21165.708354] ata6.00: exception Emask 0x10 SAct 0x7c0000 SErr 0x400000 action 0x6 frozen
[21165.708361] ata6.00: irq_stat 0x08000000, interface fatal error
[21165.708366] ata6: SError: { Handshk }
[21165.708371] ata6.00: failed command: WRITE FPDMA QUEUED
[21165.708381] ata6.00: cmd 61/40:90:00:84:bd/05:00:29:00:00/40 tag 18 ncq dma 688128 out
                        res 40/00:b4:a8:af:8e/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[21165.708386] ata6.00: status: { DRDY }
[21165.708390] ata6.00: failed command: WRITE FPDMA QUEUED
[21165.708399] ata6.00: cmd 61/c0:98:40:89:bd/02:00:29:00:00/40 tag 19 ncq dma 360448 out
                        res 40/00:b4:a8:af:8e/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[21165.708404] ata6.00: status: { DRDY }
[21165.708407] ata6.00: failed command: WRITE FPDMA QUEUED
[21165.708415] ata6.00: cmd 61/40:a0:00:a8:bd/05:00:29:00:00/40 tag 20 ncq dma 688128 out
                        res 40/00:b4:a8:af:8e/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[21165.708420] ata6.00: status: { DRDY }
[21165.708424] ata6.00: failed command: WRITE FPDMA QUEUED
[21165.708432] ata6.00: cmd 61/60:a8:40:ad:bd/00:00:29:00:00/40 tag 21 ncq dma 49152 out
                        res 40/00:b4:a8:af:8e/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[21165.708437] ata6.00: status: { DRDY }
[21165.708440] ata6.00: failed command: WRITE FPDMA QUEUED
[21165.708448] ata6.00: cmd 61/40:b0:a8:af:8e/00:00:2b:00:00/40 tag 22 ncq dma 32768 out
                        res 40/00:b4:a8:af:8e/00:00:2b:00:00/40 Emask 0x10 (ATA bus error)
[21165.708453] ata6.00: status: { DRDY }
[21165.708459] ata6: hard resetting link
[21166.194909] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[21166.198724] ata6.00: configured for UDMA/100
[21166.198797] ata6: EH complete
[36449.928405] PM: Syncing filesystems ... done.
[36450.449303] PM: Preparing system for sleep (mem)
[36450.449781] Freezing user space processes ... (elapsed 0.003 seconds) done.
[36450.452915] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
[36450.453104] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[36450.454657] PM: Suspending system (mem)
[36450.454671] Suspending console(s) (use no_console_suspend to debug)
[36450.455263] sd 5:0:0:0: [sda] Synchronizing SCSI cache
[36450.457821] serial 00:07: disabled
[36450.457826] serial 00:07: System wakeup disabled by ACPI
[36450.457849] i8042 kbd 00:06: System wakeup enabled by ACPI
[36450.500341] sd 5:0:0:0: [sda] Stopping disk
[36451.776462] PM: suspend of devices complete after 1321.465 msecs
[36451.777417] PM: late suspend of devices complete after 0.952 msecs
[36451.778191] pcieport 0000:00:07.0: System wakeup enabled by ACPI
[36451.778208] pcieport 0000:00:05.0: System wakeup enabled by ACPI
[36451.778374] ehci-pci 0000:00:16.2: System wakeup enabled by ACPI
[36451.778407] ohci-pci 0000:00:16.0: System wakeup enabled by ACPI
[36451.778443] ohci-pci 0000:00:14.5: System wakeup enabled by ACPI
[36451.778588] ohci-pci 0000:00:13.0: System wakeup enabled by ACPI
[36451.778607] ehci-pci 0000:00:13.2: System wakeup enabled by ACPI
[36451.778657] ehci-pci 0000:00:12.2: System wakeup enabled by ACPI
[36451.778659] ohci-pci 0000:00:12.0: System wakeup enabled by ACPI
[36451.799612] PM: noirq suspend of devices complete after 22.191 msecs
[36451.800945] ACPI: Preparing to enter system sleep state S3
[36451.801036] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[36451.801718] ACPI : EC: EC stopped
[36451.801719] PM: Saving platform NVS memory
[36451.801927] Disabling non-boot CPUs ...
[36451.830054] smpboot: CPU 1 is now offline
[36451.857753] smpboot: CPU 2 is now offline
[36451.897720] smpboot: CPU 3 is now offline
[36451.934304] smpboot: CPU 4 is now offline
[36451.967581] smpboot: CPU 5 is now offline
[36452.004310] smpboot: CPU 6 is now offline
[36452.034241] smpboot: CPU 7 is now offline
[36452.038486] ACPI: Low-level resume complete
[36452.038515] ACPI : EC: EC started
[36452.038516] PM: Restoring platform NVS memory
[36452.038689] PCI-DMA: Resuming GART IOMMU
[36452.038690] PCI-DMA: Restoring GART aperture settings
[36452.038695] LVT offset 0 assigned for vector 0x400
[36452.044236] microcode: CPU0: new patch_level=0x0600063d
[36452.044313] Enabling non-boot CPUs ...
[36452.044344] x86: Booting SMP configuration:
[36452.044344] smpboot: Booting Node 0 Processor 1 APIC 0x11
[36452.047320]  cache: parent cpu1 should not be sleeping
[36452.047531] CPU1 is up
[36452.047554] smpboot: Booting Node 0 Processor 2 APIC 0x12
[36452.050509]  cache: parent cpu2 should not be sleeping
[36452.055929] microcode: CPU2: new patch_level=0x0600063d
[36452.056089] CPU2 is up
[36452.056107] smpboot: Booting Node 0 Processor 3 APIC 0x13
[36452.059068]  cache: parent cpu3 should not be sleeping
[36452.059325] CPU3 is up
[36452.059341] smpboot: Booting Node 0 Processor 4 APIC 0x14
[36452.062276]  cache: parent cpu4 should not be sleeping
[36452.067698] microcode: CPU4: new patch_level=0x0600063d
[36452.067906] CPU4 is up
[36452.067923] smpboot: Booting Node 0 Processor 5 APIC 0x15
[36452.070907]  cache: parent cpu5 should not be sleeping
[36452.071206] CPU5 is up
[36452.071223] smpboot: Booting Node 0 Processor 6 APIC 0x16
[36452.074204]  cache: parent cpu6 should not be sleeping
[36452.079624] microcode: CPU6: new patch_level=0x0600063d
[36452.079845] CPU6 is up
[36452.079859] smpboot: Booting Node 0 Processor 7 APIC 0x17
[36452.082868]  cache: parent cpu7 should not be sleeping
[36452.083191] CPU7 is up
[36452.095813] ACPI: Waking up from system sleep state S3
[36452.096503] ohci-pci 0000:00:12.0: System wakeup disabled by ACPI
[36452.096525] ohci-pci 0000:00:13.0: System wakeup disabled by ACPI
[36452.096619] ohci-pci 0000:00:14.5: System wakeup disabled by ACPI
[36452.096632] ohci-pci 0000:00:16.0: System wakeup disabled by ACPI
[36452.110278] ehci-pci 0000:00:16.2: System wakeup disabled by ACPI
[36452.110489] ehci-pci 0000:00:13.2: System wakeup disabled by ACPI
[36452.110499] ehci-pci 0000:00:12.2: System wakeup disabled by ACPI
[36452.110597] pcieport 0000:00:07.0: System wakeup disabled by ACPI
[36452.110601] pcieport 0000:00:05.0: System wakeup disabled by ACPI
[36452.110676] PM: noirq resume of devices complete after 14.475 msecs
[36452.111388] PM: early resume of devices complete after 0.672 msecs
[36452.111552] usb usb2: root hub lost power or was reset
[36452.111553] usb usb3: root hub lost power or was reset
[36452.111560] rtc_cmos 00:03: System wakeup disabled by ACPI
[36452.111571] usb usb5: root hub lost power or was reset
[36452.111572] usb usb6: root hub lost power or was reset
[36452.111592] i8042 kbd 00:06: System wakeup disabled by ACPI
[36452.112210] serial 00:07: activated
[36452.127122] [drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0
[36452.127125] [drm] PCIE gen 2 link speeds already enabled
[36452.128365] [drm] PCIE GART of 32M enabled (table at 0x00000000001D6000).
[36452.128483] radeon 0000:01:00.0: WB enabled
[36452.128484] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880426d7dc00
[36452.128485] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880426d7dc04
[36452.128487] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880426d7dc08
[36452.128488] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880426d7dc0c
[36452.128489] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880426d7dc10
[36452.128740] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90002435a18
[36452.148877] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff880426d7dc18
[36452.148878] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff880426d7dc1c
[36452.224346] sd 5:0:0:0: [sda] Starting disk
[36452.225756] r8169 0000:02:00.0 enp2s0: link down
[36452.664210] usb 6-2: reset SuperSpeed USB device number 2 using xhci_hcd
[36452.670746] [drm] ring test on 0 succeeded in 1 usecs
[36452.670750] [drm] ring test on 1 succeeded in 1 usecs
[36452.670753] [drm] ring test on 2 succeeded in 1 usecs
[36452.670766] [drm] ring test on 3 succeeded in 9 usecs
[36452.670771] [drm] ring test on 4 succeeded in 3 usecs
[36452.847882] [drm] ring test on 5 succeeded in 2 usecs
[36452.847886] [drm] UVD initialized successfully.
[36452.957931] [drm] ring test on 6 succeeded in 12 usecs
[36452.957941] [drm] ring test on 7 succeeded in 3 usecs
[36452.957942] [drm] VCE initialized successfully.
[36452.957970] [drm] ib test on ring 0 succeeded in 0 usecs
[36452.957994] [drm] ib test on ring 1 succeeded in 0 usecs
[36452.958017] [drm] ib test on ring 2 succeeded in 0 usecs
[36452.958041] [drm] ib test on ring 3 succeeded in 0 usecs
[36452.958150] [drm] ib test on ring 4 succeeded in 0 usecs
[36453.617097] [drm] ib test on ring 5 succeeded
[36453.929018] r8169 0000:02:00.0 enp2s0: link up
[36454.123758] [drm] ib test on ring 6 succeeded
[36454.683768] [drm] ib test on ring 7 succeeded
[36454.921955] PM: resume of devices complete after 2810.558 msecs
[36454.922332] PM: Finishing wakeup.
[36454.922333] Restarting tasks ... done.
[36455.021710] [drm:radeon_cs_ioctl [radeon]] *ERROR* Failed to parse relocation -22!
[36455.026824] [drm:radeon_cs_ioctl [radeon]] *ERROR* Failed to parse relocation -22!
[36455.027304] [drm:radeon_cs_ioctl [radeon]] *ERROR* Failed to parse relocation -22!
[36456.723691] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[36457.170406] ata6.00: configured for UDMA/100
hddtemp выдает:

/dev/sda: WDC WD5000AAKX-08ERMA0: 28°C
allon925
hddtemp выдает
А температура тут при чем? Если грешите на винт, то вам больше подойдет smartmontools. Установите пакет:
sudo pacman -S smartmontools
И смотрите простыню на выхлопе:
sudo smartctl -a /dev/sda
In Tux We Trust
Вывод: sudo smartctl -a /dev/sda


[sergey@sergeyM ~]$ sudo smartctl -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.13-1-ARCH] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD5000AAKX-08ERMA0
Serial Number:    WD-WCC2ET289612
LU WWN Device Id: 5 0014ee 25d2cff4b
Firmware Version: 19.01H19
User Capacity:    500 107 862 016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu Jan 19 11:52:12 2017 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                ( 8400) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  85) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3037) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       41
  3 Spin_Up_Time            0x0027   141   137   021    Pre-fail  Always       -       3908
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2826
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   076   076   000    Old_age   Always       -       17624
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2763
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       473
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       2352
194 Temperature_Celsius     0x0022   114   096   000    Old_age   Always       -       29
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       92
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     16947         -
# 2  Extended offline    Completed without error       00%     14965         -
# 3  Short offline       Completed without error       00%     14963         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

А почему на винт подозрение? Суспенд в оперативку же. Памяти хватает?
[drm:radeon_cs_ioctl [radeon]] *ERROR* Failed to parse relocation -22 может в дровах или системд проблема
vs220
А почему на винт подозрение? Суспенд в оперативку же. Памяти хватает?
[drm:radeon_cs_ioctl [radeon]] *ERROR* Failed to parse relocation -22 может в дровах или системд проблема

Драйвер на видеокарту стоит свободный:
https://www.archlinux.org/packages/extra/i686/xf86-video-ati/

Памяти 16 gb. Сейчас при торможениях занято всего 4,5 gb.

может в дровах или системд проблема. Как это посмотреть?
allon925
системд проблема. Как это посмотреть?
https://wiki.archlinux.org/index.php/Systemd#Troubleshooting
еще может аварийный дамп памяти пишет забивая io
гляньте при тормозах
sudo iotop
pacman -S  iotop
если не стоит
Ну и
top

allon925
дровах
лог иксов
allon925
попробуй после ждущего(syspend) режима почистить память:
# sync; echo 3 > /proc/sys/vm/drop_caches
Лог иксов:


sergey@sergeyM ~]$ cat ~/.local/share/xorg/Xorg.0.log
[    46.111]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[    46.132] X Protocol Version 11, Revision 0
[    46.132] Build Operating System: Linux 4.5.4-1-ARCH x86_64
[    46.132] Current Operating System: Linux sergeyM 4.8.13-1-ARCH #1 SMP PREEMPT Fri Dec 9 07:24:34 CET 2016 x86_64
[    46.133] Kernel command line: \vmlinuz-linux ro root=UUID=7e77764d-c17e-4d43-9401-1af22b081d6c radeon.gartsize=32 initrd=\initramfs-linux-fallback.img
[    46.133] Build Date: 19 July 2016  05:54:24PM
[    46.133]
[    46.133] Current version of pixman: 0.34.0
[    46.133]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    46.133] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    46.134] (==) Log file: "/home/sergey/.local/share/xorg/Xorg.0.log", Time: Wed Jan 18 17:16:35 2017
[    46.153] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    46.153] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    46.174] (==) No Layout section.  Using the first Screen section.
[    46.174] (==) No screen section available. Using defaults.
[    46.174] (**) |-->Screen "Default Screen Section" (0)
[    46.174] (**) |   |-->Monitor "<default monitor>"
[    46.175] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[    46.175] (**) |   |-->Device "RADEON"
[    46.175] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    46.175] (==) Automatically adding devices
[    46.175] (==) Automatically enabling devices
[    46.175] (==) Automatically adding GPU devices
[    46.175] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    46.207] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    46.207]    Entry deleted from font path.
[    46.244] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    46.244]    Entry deleted from font path.
[    46.244]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    46.244] (==) FontPath set to:
        /usr/share/fonts/misc/,
        /usr/share/fonts/TTF/,
        /usr/share/fonts/OTF/,
        /usr/share/fonts/100dpi/
[    46.244] (==) ModulePath set to "/usr/lib/xorg/modules"
[    46.244] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    46.244] (II) Loader magic: 0x821d40
[    46.244] (II) Module ABI versions:
[    46.244]    X.Org ANSI C Emulation: 0.4
[    46.244]    X.Org Video Driver: 20.0
[    46.244]    X.Org XInput driver : 22.1
[    46.244]    X.Org Server Extension : 9.0
[    46.245] (++) using VT number 1

[    46.245] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    46.248] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    46.249] (II) xfree86: Adding drm device (/dev/dri/card0)
[    46.250] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[    46.253] (--) PCI:*(0:1:0:0) 1002:683d:1458:2556 rev 0, Mem @ 0xc0000000/268435456, 0xfea00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    46.253] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    46.253] (II) LoadModule: "glx"
[    46.271] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    46.341] (II) Module glx: vendor="X.Org Foundation"
[    46.341]    compiled for 1.18.4, module version = 1.0.0
[    46.341]    ABI class: X.Org Server Extension, version 9.0
[    46.341] (==) AIGLX enabled
[    46.341] (II) LoadModule: "radeon"
[    46.341] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    46.364] (II) Module radeon: vendor="X.Org Foundation"
[    46.364]    compiled for 1.18.4, module version = 7.8.0
[    46.364]    Module class: X.Org Video Driver
[    46.364]    ABI class: X.Org Video Driver, version 20.0
[    46.364] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
        ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
        ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
        ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
        ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
        ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
        ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
        ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
        ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
        ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
        ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
        ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
        ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
        ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
        ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
        ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
        ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
        ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
        ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
        ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
        ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
        ATI Radeon 9800PRO, ATI Radeon 9800XT,
        ATI Radeon Mobility 9600/9700 (M10/M11),
        ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
        ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
        ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
        ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
        ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
        ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
        ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
        ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
        ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
        ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
        ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
        ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
        ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
        ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
        ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
        ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
        ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
        ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
        ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
        ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
        ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
        ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
        ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
        ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
        ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
        ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
        ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
        ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
        ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
        ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
        ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
        ATI FireGL V3350, ATI Mobility Radeon X1450,
        ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
        ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
        ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
        ATI FireGL V3400, ATI Mobility FireGL V5250,
        ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
        ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
        ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
        ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
        ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
        ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
        ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
        ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
        ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
        ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
        ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
        ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
        AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
        ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
        ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
        ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
        ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
        ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
        ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
        ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
        ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
        ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
        ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
        ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
        ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
        ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
        ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
        ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
        ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
        ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
        ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
        ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
        ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
        ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
        ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
        ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
        ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
        ATI FireGL V3600, ATI Radeon HD 2600 LE,
        ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
        ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
        ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
        ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
        ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
        ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
        ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
        ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
        ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
        AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
        AMD Radeon HD 6300 Series Graphics,
        AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
        ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
        AMD Firestream 9350, ATI Radeon HD 5800 Series,
        ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
        ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
        ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
        ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
        REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
        ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
        AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
        AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
        ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
        MULLINS, KAVERI, HAWAII
[    46.369] (II) [KMS] Kernel modesetting enabled.
[    46.369] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    46.369] (II) RADEON(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    46.369] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    46.369] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    46.369] (==) RADEON(0): Default visual is TrueColor
[    46.369] (**) RADEON(0): Option "AccelMethod" "glamor"
[    46.369] (**) RADEON(0): Option "TearFree" "on"
[    46.369] (==) RADEON(0): RGB weight 888
[    46.369] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    46.369] (--) RADEON(0): Chipset: "VERDE" (ChipID = 0x683d)
[    46.369] (II) Loading sub module "fb"
[    46.369] (II) LoadModule: "fb"
[    46.369] (II) Loading /usr/lib/xorg/modules/libfb.so
[    46.382] (II) Module fb: vendor="X.Org Foundation"
[    46.383]    compiled for 1.18.4, module version = 1.0.0
[    46.383]    ABI class: X.Org ANSI C Emulation, version 0.4
[    46.383] (II) Loading sub module "dri2"
[    46.383] (II) LoadModule: "dri2"
[    46.398] (II) Module "dri2" already built-in
[    46.398] (II) Loading sub module "glamoregl"
[    46.398] (II) LoadModule: "glamoregl"
[    46.398] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    46.462] (II) Module glamoregl: vendor="X.Org Foundation"
[    46.462]    compiled for 1.18.4, module version = 1.0.0
[    46.462]    ABI class: X.Org ANSI C Emulation, version 0.4
[    46.462] (II) glamor: OpenGL accelerated X.org driver based.
[    47.391] (II) glamor: EGL version 1.4 (DRI2):
[    47.454] (II) RADEON(0): glamor detected, initialising EGL layer.
[    47.454] (II) RADEON(0): KMS Color Tiling: enabled
[    47.454] (II) RADEON(0): KMS Color Tiling 2D: enabled
[    47.454] (**) RADEON(0): TearFree enabled
[    47.454] (WW) RADEON(0): KMS Pageflipping: disabled because of ShadowPrimary/TearFree
[    47.454] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    47.611] (II) RADEON(0): Output DisplayPort-0 has no monitor section
[    47.770] (II) RADEON(0): Output DisplayPort-1 has no monitor section
[    47.804] (II) RADEON(0): Output HDMI-0 has no monitor section
[    47.817] (II) RADEON(0): Output DVI-0 has no monitor section
[    47.980] (II) RADEON(0): EDID for output DisplayPort-0
[    48.142] (II) RADEON(0): EDID for output DisplayPort-1
[    48.176] (II) RADEON(0): EDID for output HDMI-0
[    48.176] (II) RADEON(0): Manufacturer: ACI  Model: 24f1  Serial#: 16843009
[    48.176] (II) RADEON(0): Year: 2011  Week: 14
[    48.176] (II) RADEON(0): EDID Version: 1.3
[    48.176] (II) RADEON(0): Digital Display Input
[    48.176] (II) RADEON(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    48.176] (II) RADEON(0): Gamma: 2.20
[    48.176] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[    48.176] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    48.176] (II) RADEON(0): Default color space is primary color space
[    48.176] (II) RADEON(0): First detailed timing is preferred mode
[    48.176] (II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
[    48.176] (II) RADEON(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
[    48.176] (II) RADEON(0): Supported established timings:
[    48.176] (II) RADEON(0): 720x400@70Hz
[    48.176] (II) RADEON(0): 640x480@60Hz
[    48.176] (II) RADEON(0): 640x480@67Hz
[    48.176] (II) RADEON(0): 640x480@72Hz
[    48.176] (II) RADEON(0): 640x480@75Hz
[    48.176] (II) RADEON(0): 800x600@56Hz
[    48.176] (II) RADEON(0): 800x600@60Hz
[    48.176] (II) RADEON(0): 800x600@72Hz
[    48.176] (II) RADEON(0): 800x600@75Hz
[    48.176] (II) RADEON(0): 832x624@75Hz
[    48.176] (II) RADEON(0): 1024x768@60Hz
[    48.176] (II) RADEON(0): 1024x768@70Hz
[    48.176] (II) RADEON(0): 1024x768@75Hz
[    48.176] (II) RADEON(0): 1280x1024@75Hz
[    48.176] (II) RADEON(0): Manufacturer's mask: 0
[    48.176] (II) RADEON(0): Supported standard timings:
[    48.176] (II) RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    48.176] (II) RADEON(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    48.176] (II) RADEON(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    48.176] (II) RADEON(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    48.176] (II) RADEON(0): #4: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    48.176] (II) RADEON(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    48.176] (II) RADEON(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    48.176] (II) RADEON(0): Supported detailed timing:
[    48.176] (II) RADEON(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    48.176] (II) RADEON(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    48.176] (II) RADEON(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    48.176] (II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
[    48.176] (II) RADEON(0): Monitor name: VK246
[    48.176] (II) RADEON(0): Serial No: B4LMQS003991
[    48.176] (II) RADEON(0): EDID (in hex):
[    48.176] (II) RADEON(0):    00ffffffffffff000469f12401010101
[    48.176] (II) RADEON(0):    0e15010380351e78eec4f6a3574a9c23
[    48.176] (II) RADEON(0):    114f54bfef00714f818081409500a940
[    48.176] (II) RADEON(0):    b300d1c00101023a801871382d40582c
[    48.176] (II) RADEON(0):    4500132b2100001e000000fd00384c1f
[    48.176] (II) RADEON(0):    5311000a202020202020000000fc0056
[    48.176] (II) RADEON(0):    4b3234360a20202020202020000000ff
[    48.176] (II) RADEON(0):    0042344c4d51533030333939310a00a8
[    48.176] (II) RADEON(0): Printing probed modes for output HDMI-0
[    48.176] (II) RADEON(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    48.177] (II) RADEON(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    48.177] (II) RADEON(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    48.177] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    48.177] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    48.177] (II) RADEON(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    48.177] (II) RADEON(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    48.177] (II) RADEON(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    48.177] (II) RADEON(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    48.177] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    48.177] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    48.177] (II) RADEON(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    48.177] (II) RADEON(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    48.177] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    48.177] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    48.177] (II) RADEON(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    48.177] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    48.177] (II) RADEON(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    48.177] (II) RADEON(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    48.177] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    48.177] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    48.190] (II) RADEON(0): EDID for output DVI-0
[    48.190] (II) RADEON(0): Output DisplayPort-0 disconnected
[    48.190] (II) RADEON(0): Output DisplayPort-1 disconnected
[    48.190] (II) RADEON(0): Output HDMI-0 connected
[    48.190] (II) RADEON(0): Output DVI-0 disconnected
[    48.190] (II) RADEON(0): Using exact sizes for initial modes
[    48.190] (II) RADEON(0): Output HDMI-0 using initial mode 1920x1080 +0+0
[    48.190] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    48.190] (II) RADEON(0): mem size init: gart size :1bcc000 vram size: s:40000000 visible:3f62e000
[    48.190] (==) RADEON(0): DPI set to (96, 96)
[    48.190] (II) Loading sub module "ramdac"
[    48.190] (II) LoadModule: "ramdac"
[    48.190] (II) Module "ramdac" already built-in
[    48.190] (--) Depth 24 pixmap format is 32 bpp
[    48.198] (II) RADEON(0): [DRI2] Setup complete
[    48.198] (II) RADEON(0): [DRI2]   DRI driver: radeonsi
[    48.198] (II) RADEON(0): [DRI2]   VDPAU driver: radeonsi
[    48.198] (II) RADEON(0): Front buffer size: 8160K
[    48.198] (II) RADEON(0): VRAM usage limit set to 927237K
[    48.202] (II) RADEON(0): SYNC extension fences enabled
[    48.202] (II) RADEON(0): Present extension enabled
[    48.202] (==) RADEON(0): DRI3 enabled
[    48.202] (==) RADEON(0): Backing store enabled
[    48.202] (II) RADEON(0): Direct rendering enabled
[    48.698] (II) RADEON(0): Use GLAMOR acceleration.
[    48.698] (II) RADEON(0): Acceleration enabled
[    48.698] (==) RADEON(0): DPMS enabled
[    48.698] (==) RADEON(0): Silken mouse enabled
[    48.706] (II) RADEON(0): Set up textured video (glamor)
[    48.706] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video.
[    48.706] (II) RADEON(0): [XvMC] Extension initialized.
[    48.706] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    48.710] (--) RandR disabled
[    48.725] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    48.725] (II) AIGLX: enabled GLX_ARB_create_context
[    48.725] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    48.725] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    48.725] (II) AIGLX: enabled GLX_INTEL_swap_event
[    48.725] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    48.725] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    48.725] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    48.725] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    48.725] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    48.725] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    48.726] (II) AIGLX: Loaded and initialized radeonsi
[    48.726] (II) GLX: Initialized DRI2 GL provider for screen 0
[    48.726] (II) RADEON(0): Setting screen physical size to 508 x 285
[    49.118] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    49.118] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    49.118] (II) LoadModule: "evdev"
[    49.118] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    49.136] (II) Module evdev: vendor="X.Org Foundation"
[    49.136]    compiled for 1.18.4, module version = 2.10.4
[    49.136]    Module class: X.Org XInput Driver
[    49.136]    ABI class: X.Org XInput driver, version 22.1
[    49.138] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 15 paused 0
[    49.138] (II) Using input driver 'evdev' for 'Power Button'
[    49.138] (**) Power Button: always reports core events
[    49.138] (**) evdev: Power Button: Device: "/dev/input/event6"
[    49.138] (--) evdev: Power Button: Vendor 0 Product 0x1
[    49.138] (--) evdev: Power Button: Found keys
[    49.138] (II) evdev: Power Button: Configuring as keyboard
[    49.138] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[    49.138] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    49.138] (**) Option "xkb_rules" "evdev"
[    49.139] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    49.139] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    49.140] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 16 paused 0
[    49.140] (II) Using input driver 'evdev' for 'Power Button'
[    49.140] (**) Power Button: always reports core events
[    49.141] (**) evdev: Power Button: Device: "/dev/input/event5"
[    49.141] (--) evdev: Power Button: Vendor 0 Product 0x1
[    49.141] (--) evdev: Power Button: Found keys
[    49.141] (II) evdev: Power Button: Configuring as keyboard
[    49.141] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event5"
[    49.141] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    49.141] (**) Option "xkb_rules" "evdev"
[    49.142] (II) config/udev: Adding input device C-Media Electronics Inc.       USB PnP Sound Device (/dev/input/event1)
[    49.142] (**) C-Media Electronics Inc.       USB PnP Sound Device: Applying InputClass "evdev keyboard catchall"
[    49.143] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 17 paused 0
[    49.143] (II) Using input driver 'evdev' for 'C-Media Electronics Inc.       USB PnP Sound Device'
[    49.143] (**) C-Media Electronics Inc.       USB PnP Sound Device: always reports core events
[    49.143] (**) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Device: "/dev/input/event1"
[    49.143] (--) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Vendor 0xd8c Product 0x13c
[    49.143] (--) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Found keys
[    49.143] (II) evdev: C-Media Electronics Inc.       USB PnP Sound Device: Configuring as keyboard
[    49.143] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.3/0003:0D8C:013C.0001/input/input1/event1"
[    49.143] (II) XINPUT: Adding extended input device "C-Media Electronics Inc.       USB PnP Sound Device" (type: KEYBOARD, id 8)
[    49.143] (**) Option "xkb_rules" "evdev"
[    49.144] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event4)
[    49.144] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[    49.200] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 18 paused 0
[    49.200] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[    49.200] (**) Logitech USB Laser Mouse: always reports core events
[    49.200] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event4"
[    49.200] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc069
[    49.200] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons
[    49.200] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s)
[    49.200] (--) evdev: Logitech USB Laser Mouse: Found relative axes
[    49.200] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes
[    49.200] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse
[    49.200] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support
[    49.200] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[    49.200] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    49.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-4/8-4:1.0/0003:046D:C069.0004/input/input4/event4"
[    49.200] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 9)
[    49.200] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes.
[    49.201] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[    49.201] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[    49.201] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[    49.201] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[    49.202] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse1)
[    49.202] (II) No input driver specified, ignoring this device.
[    49.202] (II) This device may have been added with another device file.
[    49.203] (II) config/udev: Adding input device ASUS USB2.0 Webcam (/dev/input/event9)
[    49.203] (**) ASUS USB2.0 Webcam: Applying InputClass "evdev keyboard catchall"
[    49.204] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 19 paused 0
[    49.204] (II) Using input driver 'evdev' for 'ASUS USB2.0 Webcam'
[    49.204] (**) ASUS USB2.0 Webcam: always reports core events
[    49.204] (**) evdev: ASUS USB2.0 Webcam: Device: "/dev/input/event9"
[    49.204] (--) evdev: ASUS USB2.0 Webcam: Vendor 0xc45 Product 0x6300
[    49.204] (--) evdev: ASUS USB2.0 Webcam: Found keys
[    49.204] (II) evdev: ASUS USB2.0 Webcam: Configuring as keyboard
[    49.205] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input9/event9"
[    49.205] (II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam" (type: KEYBOARD, id 10)
[    49.205] (**) Option "xkb_rules" "evdev"
[    49.206] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[    49.206] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[    49.263] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 20 paused 0
[    49.263] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    49.263] (**) Logitech USB Receiver: always reports core events
[    49.263] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[    49.263] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    49.263] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[    49.263] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    49.263] (--) evdev: Logitech USB Receiver: Found relative axes
[    49.263] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[    49.263] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    49.263] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    49.263] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    49.264] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    49.264] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb11/11-3/11-3:1.0/0003:046D:C52F.0002/input/input2/event2"
[    49.264] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[    49.264] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    49.264] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    49.264] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    49.264] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    49.264] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    49.265] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    49.265] (II) No input driver specified, ignoring this device.
[    49.265] (II) This device may have been added with another device file.
[    49.265] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[    49.265] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[    49.267] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 21 paused 0
[    49.267] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[    49.267] (**) Logitech USB Receiver: always reports core events
[    49.267] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[    49.267] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[    49.267] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[    49.267] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[    49.267] (--) evdev: Logitech USB Receiver: Found relative axes
[    49.267] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[    49.267] (--) evdev: Logitech USB Receiver: Found absolute axes
[    49.267] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[    49.267] (--) evdev: Logitech USB Receiver: Found keys
[    49.267] (II) evdev: Logitech USB Receiver: Configuring as mouse
[    49.267] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[    49.267] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[    49.267] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[    49.267] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    49.267] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:16.0/usb11/11-3/11-3:1.1/0003:046D:C52F.0003/input/input3/event3"
[    49.267] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[    49.267] (**) Option "xkb_rules" "evdev"
[    49.267] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[    49.267] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[    49.267] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[    49.267] (**) Logitech USB Receiver: (accel) acceleration profile 0
[    49.267] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    49.267] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    49.268] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event8)
[    49.268] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    49.269] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 22 paused 0
[    49.269] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    49.269] (**) Eee PC WMI hotkeys: always reports core events
[    49.269] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event8"
[    49.269] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[    49.269] (--) evdev: Eee PC WMI hotkeys: Found keys
[    49.269] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[    49.269] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input8/event8"
[    49.269] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[    49.269] (**) Option "xkb_rules" "evdev"
[    49.270] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    49.270] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    49.271] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 23 paused 0
[    49.271] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    49.271] (**) AT Translated Set 2 keyboard: always reports core events
[    49.271] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    49.271] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    49.271] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    49.271] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    49.271] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    49.271] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    49.271] (**) Option "xkb_rules" "evdev"
[    49.272] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    49.272] (II) No input driver specified, ignoring this device.
[    49.272] (II) This device may have been added with another device file.
[    74.266] (II) RADEON(0): EDID vendor "ACI", prod id 9457
[    74.267] (II) RADEON(0): Using EDID range info for horizontal sync
[    74.267] (II) RADEON(0): Using EDID range info for vertical refresh
[    74.267] (II) RADEON(0): Printing DDC gathered Modelines:
[    74.267] (II) RADEON(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    74.267] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    74.267] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    74.267] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    74.267] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    74.267] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    74.267] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    74.267] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    74.267] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    74.267] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    74.267] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    74.267] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    74.267] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    74.267] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    74.267] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    74.267] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    74.267] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    74.267] (II) RADEON(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    74.267] (II) RADEON(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    74.267] (II) RADEON(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    74.267] (II) RADEON(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    74.267] (II) RADEON(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    87.026] (II) RADEON(0): EDID vendor "ACI", prod id 9457
[    87.026] (II) RADEON(0): Using hsync ranges from config file
[    87.026] (II) RADEON(0): Using vrefresh ranges from config file
[    87.026] (II) RADEON(0): Printing DDC gathered Modelines:
[    87.026] (II) RADEON(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    87.026] (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    87.026] (II) RADEON(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    87.026] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    87.026] (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[    87.026] (II) RADEON(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[    87.026] (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    87.026] (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    87.026] (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    87.026] (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    87.026] (II) RADEON(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    87.026] (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    87.026] (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    87.026] (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    87.026] (II) RADEON(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    87.026] (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    87.026] (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    87.026] (II) RADEON(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    87.026] (II) RADEON(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[    87.026] (II) RADEON(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    87.026] (II) RADEON(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    87.026] (II) RADEON(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
Вывод top:
https://fotki.yandex.ru/next/users/mageston/album/526418/view/1469743?page=0
 
Зарегистрироваться или войдите чтобы оставить сообщение.