bumblebee

1. sudo pacman -S primus 20151110-5

2. sudo pacman -S xf86-video-nouveau

3. sudo pacman -S mesa

4. sudo pacman -S mesa-demos

5.$ optirun glxgears -info - но, ничего не вышло((

optirun glxgears -info
[136560.681116] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
[136560.681137] [ERROR]Could not connect to bumblebee daemon - is it running?

lspci -k| grep -EA2 'VGA|3D'
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
Subsystem: CLEVO/KAPOK Computer Device 6504
Kernel driver in use: i915
— 01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce 940M] (rev a2)
Subsystem: CLEVO/KAPOK Computer Device 6504
Kernel modules: nouveau

 sudo bumblebeed -vv
[136776.860198] [DEBUG]Found card: 01:00.0 (discrete)
[136776.860216] [DEBUG]Found card: 00:02.0 (integrated)
[136776.860219] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[136776.860348] [INFO]Configured driver: nvidia
[136776.860354] [DEBUG]Skipping auto-detection, using configured driver 'nvidia'
[136776.860432] [DEBUG]Process /sbin/modprobe started, PID 5824.
[136776.860488] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[136776.861395] [DEBUG]SIGCHILD received, but wait failed with No child processes
[136776.861661] [INFO]Loading driver bbswitch (module bbswitch)
[136776.861740] [DEBUG]Process modprobe started, PID 5825.
modprobe: FATAL: Module bbswitch not found in directory /lib/modules/4.1.15-2-MANJARO
[136776.862622] [DEBUG]Process with PID 5825 returned code 1
[136776.862810] [ERROR]Module bbswitch could not be loaded (timeout?)
[136776.862814] [DEBUG]bbswitch is not available, perhaps you need to insmod it?
[136776.862817] [INFO]Skipping switcheroo PM method because it is not explicitly selected in the configuration.
[136776.862820] [WARN]No switching method available. The dedicated card will always be on.
[136776.862822] [DEBUG]Active configuration:
[136776.862824] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[136776.862827] [DEBUG] X display: :8
[136776.862829] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[136776.862832] [DEBUG] Socket path: /var/run/bumblebee.socket
[136776.862834] [DEBUG] xorg.conf file: /etc/bumblebee/xorg.conf.nvidia
[136776.862837] [DEBUG] xorg.conf.d dir: /etc/bumblebee/xorg.conf.d
[136776.862839] [DEBUG] ModulePath: /usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
[136776.862842] [DEBUG] GID name: bumblebee
[136776.862844] [DEBUG] Power method: auto
[136776.862846] [DEBUG] Stop X on exit: 1
[136776.862849] [DEBUG] Driver: nvidia
[136776.862851] [DEBUG] Driver module: nvidia
[136776.862853] [DEBUG] Card shutdown state: 1
[136776.862934] [DEBUG]Process /sbin/modprobe started, PID 5826.
[136776.862985] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[136776.863844] [DEBUG]SIGCHILD received, but wait failed with No child processes
[136776.863858] [ERROR]Module 'nvidia' is not found.

Teslamachine
Система: манджаро xfce последняя. 64

jim945

Teslamachine
Система: манджаро xfce последняя. 64

Форумом ошибся. Здесь Arch Linux обсуждают.

vs220
Вы поставили nouveau а грузить пытаетесь nvidia.
Определитесь: или ставьте nvidia или правьте конфиги под nouveau

sudo pacman -R xf86-video-nouveau

sudo pacman -Suy
sudo pacman -S xf86-video-intel mesa mesa-libgl mesa-demos  bumblebee nvidia

sudo gpasswd -a  юзер bumblebee

sudo systemctl enable bumblebeed.service

optirun glxspheres64

Teslamachine
а какая разница? там мне не помогли, одно и тоже по сути

jim945
Если бы Арч установил, то такие глупые вопросы не задавал бы здесь.